Up to 35% Off · Ends June 30
Everything On Sale
744 products marked down through the end of June. Shop by brand below or scroll the full lineup.
-
Tartaric Acid
MoreWine!'s Tartaric Acid is processed naturally in Europe from grapes and is the preferred acid for adjusting acid levels in wine. Be aware that a lot Tartaric Acid available to home winemakers is artificially made, comes from China, and does not integrate into the wine as well. Some of this tartaric includes the designation of "food-grade". Because MoreWine! packages this product you can be assured you are getting the highest winery-grade quality. 3.8g per gallon adjusts acidity by +.1%. As a note: some tartaric acid will drop out of suspension as potassium bitartrate if you are doing any cold stabilization. You might want to re-test total acidity after cold stabilization.
$5.99 $3.89
-
Wine Corks - Aglica
An agglomerated cork that offers a great seal using compressed pieces of small cork. Fantastic value. Because they do not compress as easy as natural corks, you will need a floor corker, as opposed to a handcorker, to push these into the bottles.
$6.99
-
Super-Kleer Finings (Kieselsol/Chitosan) - 65 mL Packet
Super-Kleer K.C. is a two stage wine and beer clarifying kit. Contains two pre-mixed pouches of kieselsol and chitosan. The fining porocess works by creating both strong negative and strong positive charges in the wine, which allow for larger yeast clumping and faster clearing. Works great in wine kits, grape and fruit wines, and alcohol mashes. 65 mL (2.2 fl oz) packet. Directions: Add kieselsol (packet D1) to carboy (5-6G/19-23L) of wine, etc. Gently stir. Dissolve chitosan (packet D2) in 1 fluid oz./30mL of warm water. Add and stir gently. Clears wine in 12-48 hours. May not clear pectin haze or products made with hard water. Storage: This product is not freeze/thaw tolerant. Frozen products will crystallize if stored at temperatures below 0°C/32°F for any length of time. Products damaged in this way are no longer effective, and the damage is not reversable. Contains: Sterile Water, Kieselsol, Chitosan (Shellfish Derivative)
$4.19 $2.72
-
Wine Conditioner - 500mL
Wine Conditioner is a combination sugar/sorbate solution for adding to a fermented wine in order to give it some residual sweetness. The sorbate helps prevent fermentation of the sugar that you are adding. Solution is 76-78° Brix. Directions: Add to taste, usually up to 125ml (4 oz) per 23L (5 gal) of wine. Wine must be stabilized before adding sweetener.
$8.99 $7.64
-
OCI American Oak Cubes | Medium Toast
Oak cubes approximately 1 cm square, made from seasoned American Oak and produced in the USA. Oak cubes take longer to impart their character to the wine than chips, but the flavor can be superior due to the higher volume of unexposed wood in the cube. Medium toast is our most popular level and provides good oak flavor and character. Recommended usage is 2 oz to 4 oz per 5 gallons of wine.
$6.49
-
Heat Shrink Sleeves - Cream
Due to high demand, the pack of 1,000 is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid December. These PVC heat shrink capsules help to make your home made wine look classy and professional. The look is the closest we have seen to commercially used tin capsules, which must be spun on with a $2,000 machine. Conversely, these PVC capsules can be easily used at home. Features horizontal tear tab. To use, slide on to top of wine bottle and dip into hot water for a quick and even shrink. Or for faster processing with a more reliable finish try one of our Heat Shrink tools. 2 1/4" Height x 1 1/4" Diameter.
$1.79
-
Heat Shrink Sleeves - White
These PVC heat shrink capsules help to make your home made wine look classy and professional. The look is the closest we have seen to commercially used tin capsules, which must be spun on with a $2,000 machine. Conversely, these PVC capsules can be easily used at home. Features horizontal tear tab. To use, slide on to top of wine bottle and dip into hot water for a quick and even shrink. Or for faster processing with a more reliable finish try one of our Heat Shrink tools. 2 1/4" Height x 1 1/4" Diameter.
$1.79
-
Replacement Fill Nozzle Assembly for Enolmatic Filler
Replaces the entire fill nozzle assembly on the WE620 Enolmatic Bottle filler, including the support arm and spring.
$87.99 $65.99
-
stavin American Oak Cubes | Heavy Toast
Heavy Toast for Red Wines where you want the rich, carmelized, carbonized oak flavor. Nice to add as a small addition after having added your regular addition of medium or medium plus oak. Manufactured by StaVin. Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor. Our cubes are fires toasted and cut by Stavin, a leading supplier of high-quality oak alternatives to top commercial wineries. Download the PDF
$7.99
-
The FermWrap™ Heater | Fermentation Heater | 40 watts | 115V
Keep your yeast or ML happy and your ferment warm during those cold winter months with this flexible heater made by Fermentap. Using tape to adhere, this flexible heating wrap can be attached directly to your fermenter or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your wine from 5-20 degrees Fahrenheit. If using carboy or bucket you can attach directly using tape (as seen in photo above.) We recommend electrical tape as it sticks and unsticks the easiest. Heating can be contolled by sticking either the entire wrap or a portion of the wrap to the fermenter. In an open evironment we see a heating differential between carboy and ambient of 10-15 degrees. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested.) To decrease the temperature differential, stick only a portion of the heating wrap to the fermenter. For precise results, we recommend using our temp controller (FE610) and carboy thermowell (FE612) for the ultimate in fermentation temperature contol. For heating small stainless variable volume fermenters and barrels up to 30 gallons a single FermWrap! works great. For volumes of 60 gallons or more, we recommend using two or more FermWraps (we do this in our winery Olin Wines all the time!). With 40 watts of heat spread over two square feet it provides gentle even heating. Draws 40 watts. 115V. Manufactured by Fermentap. Kegland Part number: KL0625
$32.99 $21.44
-
Silicone Bung (Breathable) - PET Carboy (#10)
Fits PET Carboys. A breathable Silicone stopper that acts as both a stopper and an airlock. Unique design allows CO2 pressure to escape but keeps Oxygen and airborne contamination out. Quickly became our stopper of choice for wine. Used by numerous commercial wineries. Also has great application for beer ferments: Will create a vacuum if fermenting wort cools (as opposed to pulling water in from your traditional airlock.) Air tight seal is great for extended fermented lager when CO2 production is still present but very slight.
$14.49 $12.32
-
Beer Bottle Brush
A traditional brush for cleaning 12 to 22oz beer bottles. Many customers like this design for its rounded bristles at the end of the brush that do a great job cleaning the lower half of the bottle. Includes circular metal loop for hanging. Bristles are 2.75" in diameter with an overall length of 16".
$5.00 $4.39
-
Sorbistat K (Potassium Sorbate)
Due to high demand, the 50 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Sorbistat K, Potassium Sorbate, ensures against renewed fermentation in wine when residual sugar is added post the initial ferment. Add at the rate of .5 to .75 grams per gallon (125-200ppm) in conjunction with .3 grams of meta-bisulphite (50ppm) per gallon. Use the higher end of the range (200 ppm) as the wine's pH approaches or exceeds 3.5 or when the alcohol conent of the wine is below 10%. Note: Will not stop an active fermentation. Potassium sorbate should not be used if the wine underwent an ML fermentation because sorbic acid (in the potassium sorbate) will react with lactic bacteria to produce a "geranium" smelling off-flavor. A rough approximate of weight is 1 tsp = 2.3 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
$3.49 $2.27
-
Stainless - 1/2 in. MPT x 5/8 in. Barb (3/8 in. ID)
For Insertion into a ball valve for connecting 1/2" ID line. Made from 304 type stainless steel.
$6.59 $4.28
-
Mesh Bag with Drawstring - 24 in. x 24 in.
Nylon grain bag with drawstring. Measures 24 in x 24 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
$9.89 $6.43
-
Hose Clamp | 3/8" to 7/8" OD Tubing Clamp | Stainless Steel
Stainless steel hose clamp will fit 3/8" to 7/8" Tubing.
$1.79 $1.16
-
Farro Glass | Glass Carboy | Wide Mouth | Carrying Harness | Ported w/ Spigot
Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease. Each carboy comes with a carrying harness. See below for optional stainless steel spigots. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock Plastic spigot with 3/8" OD barb (tapers from 10-12mm) 20mm (0.78") diameter spigot hole 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.
$26.99 $20.24
-
Disposable Pipette | 1 mL
Used to measure small amounts of fluid. Used in winemaking to measure the correct amount of wine for a residual sugar test using a clinitest tablet. These pipettes have a uniform pulled tip and are calibrated to deliver to the tip, with two rings near the top denoting that the small amount remaining in the tip after free delivery has ceased must be blown out and added to the main volume delivered. Capacity: 1 mL Tolerance: ±0.02 mL Subdivisions: 0.01 mL Negative Graduations: 0.2 mL Regarding "Disposable" Pipettes Please Note: While these pipettes are designated as 'disposable' to prioritize efficiency and sterility in professional laboratory settings, their high-quality borosilicate glass construction is durable enough to withstand standard cleaning and sterilization processes. For home applications or general tasks where strict medical-grade sterility is not paramount, this allows the option of reuse rather than immediate disposal. Please be aware that reusing these pipettes is done at the user's discretion, particularly regarding the maintenance of calibration accuracy and effective decontamination.
$5.49 $4.67
-
Vinyl Beverage Tubing | Rigid | Draft Line | 1/2 in. ID | 3/4 in. OD
1/2 in. ID Beverage Tubing Technical Specifications: 1/2" line provides .025 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 1/2" line holds 1 1/3 of an ounce per foot. Made from PVC.
$5.89
-
Stainless Steel Lees Stirrer (For Drill)
Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently. Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely.
$98.99 $64.34
-
ForgeFit® Stainless Tri-Clamp End Cap | 1.5"
End cap for 1.5" tri-clamp fittings. Made from 304 stainless steel.
$3.99 $3.39
-
Hydrometer - Brix (19 - 31) With Correction Scale
Precise hydrometer for measuring the sugar content and progress of fermentation in wine ferments. Comes with a thermometer/correction scale built-in. Please Note: Due to the large size of this hydrometer, it does not work with our standard 11" or 14" hydrometer jars. We recommend using our 500mL Graduated Cylinder (MT636D) with this hydrometer.
$79.99 $67.99
-
Mesh Bag with Drawstring - 15 in. x 15 in.
Nylon grain bag with a drawstring Bag size is 15 in. x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
$6.59 $4.28
-
Glass Carboy | Fermenter | Smooth Neck | Narrow Mouth | 6.5 Gallon
The large 6.5 gallon size of this carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. This carboy has a smooth neck which uses standard carboy fermentor hoods. Dimensions: Height: 22.75 inches Width: 12.5 inches Lead-free
$64.99 $55.24
-
DIN10 Sample Valve for Speidel Tanks
Sample Valve for Speidel Tanks which are equipped with a DIN10 male threaded fitting in the tank wall. Tanks larger than 290L which we order for regular stock during wine season are equipped with a single DIN10 fitting, which comes capped. This fitting will accomodate either this Sample Valve or a DIN10 Thermowell. This item is not intended for use with tanks ordered as part of our PreSeason Sale. If you did not order a GERT or GERSV option then your tank does not have the required DIN10 male fitting on it. We cannot weld this fitting in to your tank wall. However, if you ordered the GERT on your PreSeason Tank then you can replace the Thermowell with this Sample Valve.
$84.99 $72.24
-
Barrel Rack for One 30 Gal Barrel
A powder-coated metal barrel rack for the home user with one 30 gallon barrel. These racks are stable up to 6 racks high. *Please note that this is a custom manufactured product in small volumes, which is why it is only slightly less expensive than the double rack or the 60 gal size single rack. Approximate Dimensions: 8"H x 24"L x 15 "W
$174.99 $148.74
-
Female Stainless Steel Quick Disconnect (QD) w/Barb
Made in the USA from 304 stainless steel. This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review. Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
$18.99 $14.24
-
Stainless - 1.5" TC x 3/4" MPT
Adapt any 3/4" female pipe thread (FPT) fitting to 1.5" TC. AISI304 stainless.
$17.99 $13.49
-
ForgeFit® Stainless Tri-Clamp Barb | 3/4" Barb x 1.5" T.C.
Convert 1.5" tri-clamp to 3/4" barb for connecting 3/4" ID tubing. Made from 304 stainless steel.
$22.49 $19.12
-
ForgeFit® Stainless Tri-Clamp Barb | 1" Barb x 1.5" T.C.
Convert 1.5" tri-clamp to 1" barb for connecting 1" ID tubing. Made from 304 stainless steel.
$22.49 $19.12
-
Stopper - #12 With Hole
#12 natural latex rubber stopper with 3/8 inch hole. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Top diameter 64 mm, bottom diameter 54 mm, length 27 mm
$10.99 $9.34
-
Male Stainless Steel Quick Disconnect (QD) w/Barb
Made in the USA from 304 stainless steel. This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review. Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
$13.49 $8.77
-
Hydrometer - Brix (9 - 21) With Correction Scale
Precise hydrometer for measuring the sugar content and progress of fermentation in wine ferments. Comes with a thermometer/correction scale built-in. 15" total length. Please Note: Due to the large size of this hydrometer, it does not work with our standard 11" or 14" hydrometer jars. We recommend using our 500mL Graduated Cylinder (MT636D) with this hydrometer.
$79.99 $67.99
-
BrewBuilt® Stainless Ball Valve | 1/2" Locking Full Port
This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing. Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.
$14.99 $12.74
-
MPT Stainless Steel Male Quick Disconnect (QD)
When used with the male QD these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Male National Pipe Thread on the ends for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers. Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
$13.49 $10.12
-
Stainless - 2.5" TC x 2.5" Barb
2.5" Stainless clover clamp x 2.5" Long Barb for hose connection. 304-Type Stainless Steel.
$32.99 $28.04
-
KegLand Ball Lock Quick Disconnect (QD) | Gas In | Barbed
White, gas in quick disconnect with barb for gas line. Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn". Kegland Part Number: KL02943
$6.59 $4.28
-
Stopper #5-1/2 | 5.5 - With Hole
#5 1/2 natural latex rubber stopper with 3/8 inch hole. Also called a size 5.5. Size: 0.94 - 1.1 inches To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole.
$0.99 $0.64
-
Bottle Sealing Wax - Black Beads
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks. Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage. DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork. Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
$17.99 $15.29
-
Racking Tube - Stainless Steel - 3/8 in. x 26 in.
Stainless Steel racking cane - 3/8 inch OD x 26 inches long from tip to bend (30" total), with curved top. 3/8 inch diameter is the standard size for filling beer bottles.
$16.49 $10.72
-
Italian Grape Collection Bucket with Handle
Imported grape picking bucket from Italy with a sturdy handle. Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out! *Basket color may vary
$25.49 $21.67
-
Advanced Titration Acid Test Kits for Total Acidity
Proper acid adjustments rely on accurate measurements. This advanced set-up for total acidity testing will have you running acid tests fast and accurately. Comes ready-to-use, complete with our own set of directions. Equipment set includes support stand with metal base, double buret holder, self-zeroing buret made from break-proof polycarbonate, a 150mL beaker, and a 5ml pipet and bulb for measuring your test sample. Also comes included with a 4oz bottle of 0.1 normal sodium hydroxide and a vial of phenolphthalein. Most customers who buy this set also pick up a stir plate (Y700) to faciliate constant mixing of the sample being tested. Click here for the MoreWine! Guide to Advanced Acid Testing.
$529.99 $450.49
-
Stainless Hex Nipple - 1/2 in. x 1 3/4 in. Threaded
An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.
$5.49 $4.67
-
Farro Glass | Premium Wine Bottles | Bellissima | Antique Green | 375mL | Case of 12
A slim, elegant bottle design ideal for dessert wines and ice wines Bellissima bottles are typically made in smaller volumes to package wines that are consumed in smaller pours Antique green glass color is often preferred for red wines to protect them from light during long term storage Farro Glass offers a full lineup of the most essential and commonly used bottles in winemaking Bellissima wine bottles are most commonly used for dessert wines and ice wines. The slim design lends an elegant appearance when this bottle appears at the end of your meal. They are typically half the volume of standard bottles, as a Bellissima's contents are often pricey and consumed in smaller pours. Volume: 375 mL Style: Bellissima Use: Sweet Red, Dessert Wine Color: Antique Green Finish: Cork Bottom: Punted Case QTY: 12 Pallet QTY: 150 cases Our Farro Glass Wine Bottles offers a full lineup of the most essential and commonly used bottles in winemaking. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
$22.99 $17.24
-
ForgeFit® Stainless Tri-Clamp | 3" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel
$12.99 $11.04
-
Cascade | Pellet Hops
Cascade hops are the classic American hop that really started the hop craze. Defined by its citrus, and often more specifically grapefruit flavor, it is now sought out around the world. Cascade hops are a true dual purpose hop that can be used for bittering, late aroma additions, or dry hopping in the fermenter. Used in so many craft brewed pale ales, but none more famous than Sierra Nevada's Pale Ale. You cannot go wrong using Cascade hops in all kinds of American style ales. Hop Statistics: Alpha Acids: 4.5 – 7.0% Beta Acids: 4.5 – 7.0% Alpha-Beta Ratio: 0.64 – 1.55 Cohumulone: (% of alpha acids): 33 – 40% Total Oils in mls per 100 grams dried: 0.8 – 1.5 Similar Hop Varieties: Ahtanum®, Centennial, Amarillo® Ahtanum® is a registered trademark owned by Yakima Chief Hops, LLC. Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.
$1.49
-
Wine Thief - Plastic - 3-Pc 27 1/2 in (formerly WE705)
Our 3-piece thief is one of our most popular wine thieves. It can be taken apart into 3 sections for cleaning and sanitizing, then fit tightly together for taking samples. 27-1/2 inch length is ideal for taking samples from barrels, or other tall fermenters.
$18.99 $16.14
-
Wood Barrel Spigot #1 (6 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #1 spigot is approximately 6 5/16" long and 18 mm (23/32") at the small end.
$10.99 $7.14
You have seen 48 out of 741 products