Up to 35% Off · Ends June 30
Everything On Sale
744 products marked down through the end of June. Shop by brand below or scroll the full lineup.
-
Stainless Gas Pressure Relief
Gas Manifold - Pressure Relief Valve 1/4" Male Threading Set to blow off at 20 psi.
$10.99 $8.24
-
Filtered Racking Buoy | Transfer Top Down | Pre-Filter Solids | 10' Silicone Tubing Included
Transfer the clearest beer possible from first pint to last with this Filtered Racking Buoy! Stainless steel float allows you to pull liquid from the top of your vessel rather than transferring out from the bottom Sediment falls out of suspension over time, especially at cold temperatures, so the clearest beer is always at the top! 10 feet of tubing can be cut to your preferred length for both the pump inlet and outlet Made for use with transfer pumps that featyre 3/8" to 1/2" barbs The Filtered Racking Buoy kit allows you to transfer the clearest liquid possible with your transfer pump. Whether you're transferring beer or wine, the clearest liquid will always be at the top of the vessel as solids fall out of suspension and settle to the bottom over time. The stainless steel float will position your transfer tubing at the top of the liquid so you can pull from the top down and cease transferring when you get near the sediment. The filter attachment will add a layer of protection for the pump and will leave solids behind in your fermenter or storage tank. Includes: Stainless float (1.75") Filter attachment 10' length of 3/8" ID silicone tubing (3) hose clamps
$32.99 $28.04
-
1/4" Aluminum Gas Manifold
Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554
$26.49 $17.22
-
Funnel Screen | Fits 21 cm & 25 cm Funnels | Ferrari
Plastic funnel screen for use with 21 cm, 25 cm, and 25 cm Anti-splash plastic funnels. Fits our BE489, BE493, and BE498 Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.
$3.69 $2.40
-
Enolmaster Tandem Professional Filter Housing
The Enolmaster Tandem Professional Filter Housing is designed to operate in conjunction with the Enolmaster Bottle Filling Machine. Enolmaster Tandem helps you save time by filtering and bottling at the same time. Place the filters in the housing and attach the hoses, then open the bypass valve on top of the filter housing. Place the Tandem Filter Housing inline between the product and the Enolmaster Filler. The Enolmaster Filling Machine draws the product from your tank and will pull the liquid through your filter housing, into the bottle. Fast filtering and bottling, easy to use, preserves product quality, easy to clean. Holds 3 Filter Cartridges. Requires 3 Filter Cartridges of the same Micron for use. Includes tubing to connect to Enolmaster Filling Machine Alcohol tolerance up to 18% ABV Filter Cartridges sold separately and listed at the bottom of this page Easy to Use The Tandem professional filter housing in conjunction with the Enolmaster professional vacuum filler. The machine creates the vacuum inside the bottle by sucking the liquid from the main container. Then the liquid is easily filtered and bottled in a single operation. Preserves the Product The filtering system is designed to preserve the integrity of the product. The filtering cartridges retain only the unwanted particles without altering the organoleptic qualities of the product. Easy to Clean The Tandem professional filter housing is easily cleaned after each use. In this way you will always have maximum hygiene in the bottling process. Please note: Recommended for use with wine and beer only. Use with spirits and liqueurs above 18% ABV may result in damage to the filter housing.
$639.99 $543.99
-
Distilled Hop Oil - El Dorado 1 ML
Distilled hop oil is an amazing new product we are making available to homebrewers. Distilled hop oil varies from other oils in that it is produced from fresh hops, as opposed to dried and processed pellets. Distilled hop oil delivers the same wet hop character that was previously only possible to acquire with the use of freshly harvested hops. The oil is extremely shelf stable, so you can now brew a consistant fresh hop IPA all year long. Extremely volatile, this oil should only be used for aromatic applications; typically applied at bottling/kegging. Distilled hop oil is very potent; add to taste. We recommend using roughly 0.5-1 ml per 5 gallon batch, if replacing 50-100% of a dry hop, added directly to the beer prior to bottling or during kegging. Be careful to not push off the volatile aromatic compounds (disturb the beer as little as possible and reduce oxygen exposure). Most staff members here found that 1ml per 5 gallons was "too hoppy" when replacing 100% of the dry hop. Hop heads (myself included), found that the 1 ml per 5 gallon dosage gave a pungent, fresh, pleasurable and unique hop experience. Tasting these oils is as close to being in Yakima for hop harvest as possible!
$8.49 $5.52
-
Stainless Barb - 1/2 in. x 1/2 in. Male BSP
Stainless steel barb fitting. 1/2" male BSP x 13mm barb (0.51"). KegLand Part Number: KL03629
$6.59 $4.28
-
Hop Sock | Small Grain Bag | 6 in. x 31 in.
Suitable for both hops and steeping grains. We highly recommend using a steeping bag for hops to keep vegetal matter contained in the boil kettle and out of your fermenter. If you use a counterflow chiller or plate chiller for cooling, filtering hops is even more important as these devices can clog if too much hop matter passes through them. The hop sock does not have a drawstring. You will want to tie the end in a knot to keep it closed. Dimensions: 150 mm wide (5.9") 800 mm long (31.4") KegLand Part Number: KL01281
$1.79 $1.16
-
Stainless Ball Valve - 1" Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Please Note: the ball valve may be difficult to turn at first, but it will become less resistant after it is rotated back and forth a couple times.
$29.99 $22.49
-
ForgeFit® Stainless Tri-Clamp | 2.5" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 2.5" tri-clamp Made from 304 stainless steel
$11.49 $9.77
-
ForgeFit® Stainless Butterfly Valve | 2" T.C.
This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation.
$99.99 $74.99
-
MoreWine!® Cellar Keg - 50 Liters
A new take on an old favorite! Most winemakers appreciate the simplicity of using a keg for topping up barrels... apply nitrogen or argon gas pressure and you top up your barrels as needed. Our version of the cellar keg has a couple unique twists, designed after using most others on the market. We start with a brand new 50 Liter Stainless Steel Keg. We cut out the original valve and weld in a 4" tri-clamp ferrule. Some winemakers have told us they do not need the 4" opening. However, the cost difference between a keg with a 2" or 4" opening is very little, and boy is the 4" opening nice when you want to clean it quick by hand. The larger opening also comes in handy for small producers who may need to add oak staves into a cellar keg for structuring. A unique feature of our Cellar Keg is the 1.5" tri-clamp wine-out connection positioned at a 90 degree angle to the keg. Clamp on a butterfly valve for a consistently sanitary, easy-to-use connection. If you buy a Cellar Keg with a threaded connection the ball-valve that you attach gets contaminated and is hard to clean. Need a little help moving the Cellar Keg from barrel to barrel? Check out this custom-welded Rolling Cart! Features New Stainless steel 50 liter capacity keg 4" opening with Tri-Clamp connection 4" Clamp and gasket included 1.5" Tri-Clamp wine output 1/4" NPT threaded coupler welded into lid for gas connection Pressure relief "blow-off" valve to protect against over pressurizing Typically you will need hardware to connect the gas line and hardware to connect a liquid line to a hand-held barrel filling tool. We have listed all these items in the "you might need" section below. Please note we use 1' of the 1/4" beverage line as gas line(rated to 60psi) to connect to the 1/4" gas barb on the keg. On the end of the one foot connect the quick-disconnect set for an easy way to connect and disconnect your gas line.
$399.99 $339.99
-
Reagent Bottle (1000 mL)
This reagent bottle is made from durable borosilicate perfect for storing anything you need. Borosilicate is great because unlike ordinary glass it won't crack with rapid changes in temperature.
$17.99 $15.29
-
Filtrox Filter Sheets | 20 cm x 20 cm | 6 Micron
Due to high demand, the 100 sheet is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. 20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 6 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Versafix XE 34 Filter Sheets
$44.99 $38.24
-
Filtrox Filter Sheets | 20 cm x 20 cm | 11 Micron
Due to high demand, the 100 pack is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid August. 20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 11 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 11 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 5 - 18 Micron Mid Point: 11 Versafix XE 24 Filter Sheets
$38.99 $33.14
-
KOMOS® | Stainless Butterfly Hose Clamps | 1/2 in. to 1 in. | 10-Pack
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.). Comes in a convenient zip lock bag.
$10.99 $9.34
-
AlcoEngine Copper Alembic Distillation Lid | 6mm Gasket
The Alembic Copper Domed Lid fits the DigiBoil 35L and BrewZilla 35L. The large copper surface area of this copper dome acts as a catalyst with the vapor in the still and help to enhance and concentrate the flavors and aromas during the distilling process. It can also help remove unwanted sulfur compounds which results in a smoother richer, sweeter tasting spirit. This unit was primarily designed to be used with the AlcoEngine Pot Still. But can also be used with the AlcoEngine Reflux Still if you wish. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. 9-1/2" Tall 12-3/8" Diameter. Please note that copper is a very soft metal and can be dented quite easily. Store and use with care. KegLand Part number: KL1589 Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).
$120.99 $102.84
-
Amarillo® Brand VGXP01 | Whole Cone Hops
Use for hoppy beer styles including Hazy IPA, West Coast IPA, Pale Ales, or Hoppy Lagers Aroma Profile: Tropical, Citrus, Herbal, Spicy, Stone Fruit, Woody Alpha Acids: 8.0 – 11.0% Whole cone hops are often preferred for dry hopping as they maintain contact while floating in the beer and are easier to remove Adding whole cone hops directly to the mash tun is a great way to add flavor and help clarify wort Amarillo® hops have become super popular with microbrewers. Brewers are describing the flavor and aroma as a supercharged version of Cascade. Floral, tropical, and citrus (lemon, orange and grapefruit) characteristics. However, it has a distinctive orange character to it that is very different from Cascade. Supply has been very limited the last few years so make sure to buy some while it is available. Whole cone hops are typically the preferred format for dry hopping as they maintain contact with the beer by floating, they are easier to remove than pellets and they add a unique character to the beer. Adding whole cone hops directly to the mash tun is also a great way to add flavor and clarify your wort. Hop Statistics Alpha Acids: 8.0 – 11.0% Beta Acids: 6.0 – 7.0% Alpha-Beta Ratio: 1.1 - 1.8 Cohumulone: (% of alpha acids): 21 – 24% Total Oils in mls per 100 grams dried: 1.5 – 1.9 Storage (% alpha acids remaining after 6 months storage at 68° F): Good Similar Hop Varieties: Cascade, Centennial, Simcoe® Amarillo® is a trademark owned by Virgil Gamache Farms, Inc. Simcoe® is a registered trademark owned by Yakima Chief Hops, LLC.
$6.09 $5.18
-
Replacement Motor for WE235 & WE236
Replacement motor for the motorized destemmer WE235 & WE236.
$579.99 $492.99
-
Universal Poppet | Corny Keg Part
A great way to repair your keg, even if you're not sure what type you have! This poppet works on all of the kegs that we sell, Pin or Ball lock! Poppets are pretty easy to damage or lose while cleaning your keg, and having a couple extra universal poppets on hand is a great way to make sure that you can always serve your homebrew! Compatible with our ball and pin lock replacement body connects - KEG460G, KEG470G, KEG1100, KEG1101.
$4.39 $2.85
-
Solenoid Connection Cable For Kreyer Fan Unit - 2 meter 230 volt
This cable connects a 230 v solenoid valve to its controller. Use with a kreyer fan unit, solenoid valve, and control unit to choose a specific temperature set point for your room.
$30.99 $26.34
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 2"
3" x 2" tri-clamp concentric reducer. Made from 304 stainless steel.
$48.49 $41.22
-
Torpedo Keg Sleeve
Neoprene keg sleeves for standard Torpedo Kegs. For the Slimline series sleeves, see KEG651. 6mm thick. The 5-gallon sleeve is also compatible with 1/6 bbl or sixtel commercial sanke kegs.
$19.99 $12.99
-
Mosaic® Brand HBC 369 | Whole Cone Hops
A reliable workhorse for Hazy IPAs, West Coast IPAs, Pale Ales, and Hoppy Lagers Aroma Profile: Berry, Citrus, Stone Fruit, Tropical Alpha Acids: 11.5 – 13.5% Whole cone hops are often preferred for dry hopping as they maintain contact while floating in the beer and are easier to remove Adding whole cone hops directly to the mash tun is a great way to add flavor and help clarify wort Mosaic® spiked in popularity immediately after its' release due its' incredibly pungent and unique character. With a genealogy that includes Simcoe as a mother, this hop has bursting citrus, pine, mango, and blueberry aroma. Great for bittering and aroma, this quickly became a favorite hop for single hop beers. Get your hands on this highly sought after hop while you can! Whole cone hops are typically the preferred format for dry hopping as they maintain contact with the beer by floating, they are easier to remove than pellets and they add a unique character to the beer. Adding whole cone hops directly to the mash tun is also a great way to add some extra hop flavor and to clarify your wort as it filters through the flowers. Hop Statistics: Alpha Acids: 11.5 – 13.5% Beta Acids: 3.2 – 3.9% Alpha-Beta Ratio:2.95 – 4.22 Cohumulone: (% of alpha acids): 24 – 26% Total Oils in mls per 100 grams dried: 1.0 – 1.5 Storage (% alpha acids remaining after 6 months storage at 68° F): 75% Similar Hop Varieties: Simcoe® Mosaic® is a registered trademark owned by Hop Breeding Company. Simcoe® is a registered trademark owned by Yakima Chief Ranches.
$4.99 $4.24
-
1 Gallon Plastic Jar - 110 mm Wide Mouth - No Lid
Wide mouth plastic tub in "natural" opaque white color. Opening is 110 mm wide. Lids are sold separately, see item JAR01A. Holds 1 gallon, or 12 pounds of liquid malt extract (LME). Sold individually, packed in cases of 4. 192 each per pallet.
$4.99 $4.24
-
Kreyer Fan Temperature Controller | 1 Unit
This temperature control unit controls room/cooler/cave/cellar temperature when used in conjunction with a Kreyer fan unit. Kreyer fan units are plumbed to a Kreyer Glycol cooling unit. This unit turns on and off an optional solenoid placed at the inlet of the fan unit, which allows chilled glycol to enter the coils on the fan unit, while also turning on the fan(s) that blow cold air out into the room. Requires a fan unit, solenoid valve, & connection cable to function. Fan unit must be plumbed to a glycol machine. For a fan unit temperature controller to be used below freezing temperatures, see our GLY950.
$384.99 $327.24
-
Cosmopolitan Wine Making Kit - Twisted Mist
Bring a little something unexpected to your next glass! Full fruit flavor and authentic cocktail taste are twisted into this refreshing wine-based drink that’s sure to shake things up. Kick back and relax with this modern twist on wine. Flavors of cranberry, triple sec and lime. ABV: 6.5% Kit Volume: 6 L Approximate Yield: 23 L Ready to bottle in 4 weeks Bottle labels included
$82.99 $70.54
-
EZ Cap | Replacement Swing Tops for EZ Cap Bottles | 12 Pack
Replacement swing top and gasket for EZ cap bottles. The cap is made from strong molded plastic with a red rubber gasket. Pack of 12. Please Note: These swing tops are not compatible with PopTops™ brand bottles.
$11.99 $7.79
-
AEB Ball Lock Keg | Corny Keg | 2.5 gal.
High quality Italian made ball-lock, cornelius style kegs with rubber top and bottom made by AEB in Italy. The rubber tops are cool because they provide two handles and are easier to stack. These are brand new premium made kegs. The difference between Italian made and Chinese made kegs is in the craftsmanship. These are best quality kegs available. Quality is important because your beer may sit in these kegs for months. If bacteria gets into a bad weld they are going to very hard to kill. Sanitizer may not be able to get into small pockets to kill the bacteria. Kegs are 15" tall, x 8.25" diameter and weigh 7.5 pounds. This makes them approximately half the size of a 5 gallon keg. They fit pretty much everywhere from coolers to backpacks. These type of kegs are often referred to as corny or Cornelius kegs (the brand who made them originally) or soda kegs because in the past these style of kegs were made to hold soda syrup. Max working pressure of 130 PSI.
$153.99 $130.89
-
Balazs Hungarian Oak Dominoes | Medium Fire Toast
Oak Dominoes (longer contact time than cubes or chips) Medium toast level Fire Toasted by hand Made from winery quality Hungarian/Slavonian Oak These Balazs Oak dominoes feature Medium level toast. Recommended for use during short term aging for 4-5 months. As a starting point use 1 oz per gallon. Taste after four months and add more if needed. Balazs segments are made from Slavonian oak. Slavonian oak is grown in the area of Croatia that borders Hungary. While the area of Slavonia has changed hands many times, being under Hungarian control in the past, what has always remained constant is the quality of the oak grown in the region. Slavonian oak is beloved in Italy where it is widely used in the traditional and classic Italian wines of the Veneto, Tuscany and Piedmont. It is known for having the utmost respect for the fruit which is why Italian producers extensively use this oak. This makes this oak extremely useful for home winemakers who, because of the small quantities being made, need to pay special attention to not over oaking their wine. Use: Short Aging Form: Dominoes - 2" x 1" x 0.4" Time of Contact: 4-5 months Recommended Quantity: 0.8-1.1 oz/gal Type: Medium Toast
$5.99
-
Ball Lock Adapter Tapping Head for Sanke Kegs
Convert a commercial sanke keg to be used with ball lock fittings. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. Be sure to always depressurize the keg before removing the tapping head. Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi) KegLand Part Number: KL10610
$65.99 $49.49
-
Stick-On Thermometer - 4 in - 40F-120F
The stick on thermometer is great for monitoring the temperature of refrigerators, fermentation and storage areas, and other spaces. It is relatively small (4 " tall), and includes a sticky tape back to secure to a wall or other fixture. Range is -40 - 120 degrees F (-40 to 50C).
$4.99 $3.99
-
Air Driven Diaphragm Pump (1/2") Polypropylene
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 14.4 g.p.m. (54.5 l.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gallons (0.15 lit.) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75.0 db(A) Dimensions .................................... 10" W x 10 7/8" H x 6 23/32" D
$999.99 $849.99
-
Replacement Bleeder/Regulator for WE399
Bleeder/Regulator valve from the WE399 kit. Sold individually for those who need a replacement part or are planning to build their own version of our WE399 kit. Note: The inlet is noted with a molded text "CO2" next to the barb fitting. Relevant Specifications Max Inlet Pressure: 10 psi Inlet/Outlet Size: 3/8 in Construction Material: Food Grade rubber and plastic.
$329.99 $280.49
-
$6.59 $4.94
-
Magnum | Pellet Hops
Magnum is a great bittering hop with an aroma similar to a strong Willamette. It therefore works well with Willamette, Fuggles, and British Kent Goldings when used as an aroma hop in later boil additions. Magnum makes an incredibly useful bittering agent in just about any beer, and due to its very smooth bitterness, you can really use as much as you want. Clean smooth bitterness with a slight floral/fruity aroma. This German variety generally has a higher AA content than US Magnum. This is the main high alpha variety grown and used in Germany. Fantastic hop to use for bittering. Hop Statistics: Alpha Acids: 11.0 – 16.0% Beta Acids: 5.0 – 7.0% Alpha-Beta Ratio: 2.2 – 3.2 Cohumulone: (% of alpha acids): 21 – 29% Total Oils in mls per 100 grams dried: 1.6 – 2.6 Storage(% alpha acids remaining after 6 months storage at 68° F): 80 – 90% Similar Hop Varieties: Taurus, Nugget, Columbus
$1.99
-
Speidel Variable Volume Tank Lid Gasket - White Rubber
Replacement white rubber gasket for Speidel variable volume tank lids. What an upgrade to the traditional clear vinyl gaskets! Reduce issues with leakage, ensure a great seal, and reduce your worries about storing wine in a variable volume tank.These white, food-grade, rubber gaskets are formed like a channel as opposed to a circular tube to form a better seal against tank and lid. Nearly 3x as thick as the clear vinyl gaskets they also help to reduce oxidation. Hold one of these in your hand and you will instantly know from the hefty weight that this is a worthwhile upgrade for every variable volume tank owner who plans to store wine. 3/8" barb Unsure what size gasket you need? Please see the chart below for our most popular Speidel Variable Volume Tanks. SKU Tank Volume Gasket Ø GER110VF 110L 44 cm GER220VF 220L 55 cm BO-063-0290 290L 63 cm GER290VF 290L 63 cm GER300V 300L 63 cm GER530V 530L 82 cm GER650VF 650L 82 cm GER675V 675L 82 cm GER1100V 1100L 100 cm GER2200VR 2200L 140 cm
$89.99 $76.49
-
Filtrox Filter Sheets | 20 cm x 20 cm | 0.7 Micron
20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 0.7 micron pads are for ultra-fine polishing of the wine, or for preparing hard to filter wines to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets
$43.99 $37.39
-
FermZilla Tri-Conical Fermenter | Gen 3.2 | 3 in. T.C. Collection Container | 55L | 13.2G
The ultimate plastic pressurized conical A best seller for a reason! Tons of features at an incredible price Cyrstal clear super smooth PET makes fermenting and cleaning super easy 3" Butterfly valve at bottom makes removing yeast / trub easy with the 600mL collection jar Pressurizable (with accessories) for fermentation and closed transfer to your keg The Gen 3.2 FermZilla Tri-Conical features a newly designed collection container with top & bottom PCO1881 ports. The collection container has a 3" T.C. opening and installs on the Conical with a 3" T.C. butterfly valve. The molded 3" T.C. ferrule on the tank is a huge improvement over the Gen 2 model—eliminating the complicated dump valve design and simplifying the collection container connection. Brew with confidence on the new Tri-Clover FermZilla! NOTE: The primary example photo shows the collection container from the Gen 3 FermZilla. Out of the box, the FermZilla Conical is an amazing fermenter that will immediately step up your game on the cold side of the brewing process. But what we love most about this unit is how easily it is to upgrade as you go—adding more functionality and gaining more precise control over your fermentation with each new accessory. Below are some of our favorite add-ons for the FermZilla Tri-Conical Fermenter. Pressure Kit The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the FermZilla Pressure Kit, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. Tri-Clamp Pressure Lid Add a 2" T.C. port to your fermenter by replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid. This will give you an opening to add dry hops or other additions without needing to remove the entire lid, or you can upgrade down the road with a Hop Bong sight glass in order to add CO2 and purge your hop charge of oxygen. PCO1881 threaded ports are still there for Ball Lock Caps, as well as undrilled ports for an optional Thermowell and Temp Twister cooling coil. Hop Bong Pressure Pack The ultimate upgrade kit! The Hop Bong Pressure Pack has all of the parts included with the Pressure Kit and Tri-Clamp Pressure Lid but fully parted out to remove the guess work. If the Tri-Conical is your first FermZilla fermenter, this accessory kit is for you. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. FermZilla Gen 3 vs Gen 3.2: 3" x 3" T.C. butterfly dump valve 3" T.C. compatible collection container 600 mL collection container w/ top & bottom PCO1881 threaded ports What's Included: FermZilla 55L Tank with 3" T.C. Bottom Port 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles Stainless Steel Handle Assembly Top Lid with PRV (35 psi) 3" tri-clamp with gaskets 3-Piece Airlock Graduation Sticker Adhesive Thermometer Spare Seals Specs: 55 L (13.2 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 41.5" Height w/ Airlock - 45.1" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads. Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank. KegLand Part number: KL25904 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla Tri-Conical 27L & 55L | User Guide
$199.99 $179.99
-
Stainless Hop Tube
Made from 304 stainless steel, the hop tube is ideal for addling larger amounts of hop pellets, flowers or spices to your BrewZilla without blocking the pump. It can also be used in your boil kettle, corny keg, Kegmenter, or FermZilla. The fine mesh will prevent large particles from blocking bev out dip tubes, pumps, or chillers. It will hold approximately 5 oz of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. The stainless steel chain makes it perfect for use with ourCorny Keg Lid With Welded Tab. 2.6" diameter 11.8" tall Made from 304 stainless steel Kegland Part Number: KL05210
$18.99 $16.14
-
El Dorado | Pellet Hops
El Dorado hops are utilizied for their high alpha bittering characteristics and are best known for a sweet, candy-like aroma. Strong bittering and aromatic notes of cherry and mango compliment everything from IPAs to Pale Ales and Wheats. Grown in the Moxee Valley, a sub region of Yakima Valley, Washington. Hop Statistics Alpha Acids: 14.0 – 16.0% Beta Acids: 7.0 – 8.0% Alpha-Beta Ratio: 1.75 - 2.28 Cohumulone: (% of alpha acids): 30% Total Oils in mls per 100 grams dried: 2.5 – 2.8 Storage(% alpha acids remaining after 6 months storage at 68° F): NA% Similar Hop Varieties:NA
$2.29 $1.95
-
German Hersbrucker | Pellet Hops
Sometimes called Hallertau Hersbrucker as the Hersbruck region is right next to the Hallertau region and Hersbrucker is grown in both regions. A hop that represents a large acreage in Germany and what has essetially replaced traditional Hallertauer hops as they were more susceptible to disease. Hersbrucker gives you classic noble type German hop flavor. Expect spice, fruit and floral characteristics. Often used as an aroma hop, Hersbrucker has a low alpha acid percentage but generous oil content. Great for Lagers, Pilsners, Bocks, Belgian Ales, Kolsch, Munich Helles, and Lambics. Hop Statistics: Alpha Acids: 2.0 – 5.0% Beta Acids: 2.5 – 6.0% Alpha-Beta Ratio: 0.41 - 0.88 Cohumulone: (% of alpha acids): 18 – 25% Total Oils in mls per 100 grams dried: 0.5 – 0.9 Storage(% alpha acids remaining after 6 months storage at 68° F): 55 – 65% Similar Hop Varieties: Mt. Hood
$1.49 $1.27
-
S/S Bulkhead 1/2" FPT x 1/2" MPT
This stainless steel bulkhead is 1/2" FPT x 1/2" MPT with a flat, thick rubber washer that makes is very easy to install on most kettles. We use this bulkhead on our weldless spigot. You will need to drill a 1" hole to install the bulkhead.
$18.99 $14.24
-
Balazs Hungarian Oak Dominoes | Medium+ Fire Toast
Oak Dominoes (longer contact time than cubes or chips) Medium Plus toast level Fire Toasted by hand Made from winery quality Hungarian/Slavonian Oak These Balazs Oak dominoes feature Medium Plus level toast. Recommended for use during short term aging for 4-5 months. As a starting point use 1 oz per gallon. Taste after four months and add more if needed. Balazs segments are made from Slavonian oak. Slavonian oak is grown in the area of Croatia that borders Hungary. While the area of Slavonia has changed hands many times, being under Hungarian control in the past, what has always remained constant is the quality of the oak grown in the region. Slavonian oak is beloved in Italy where it is widely used in the traditional and classic Italian wines of the Veneto, Tuscany and Piedmont. It is known for having the utmost respect for the fruit which is why Italian producers extensively use this oak. This makes this oak extremely useful for home winemakers who, because of the small quantities being made, need to pay special attention to not over oaking their wine. Use: Short Aging Form: Dominoes - 2" x 1" x 0.4" Time of Contact: 4-5 months Recommended Quantity: 0.8-1.1 oz/gal Type: Medium Plus Toast
$5.49
-
Five Star | PBW Tablets | 2.5 g
The same cleaning product that brewers love, conveniently pre-measured into dissolvable tablets. PBW (Powder Brewery Wash) is a non-hazardous buffered alkaline brewer cleaner. It's the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals. It's effectiveness and ease of use has made it a go-to cleaning chemical for pros and home brewers alike. 2.5 g tablets are recommended for growlers, spray bottles, and glassware. Use 1 tablet per 32 oz of water. Also available in 10 g tablets, which are recommended for kegs, fermenters, and carboys.
$11.99 $8.99
-
ForgeFit® Stainless Butterfly Valve | 2" T.C.
This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The stainless steel handle can be rotated 180° for right or left hand operation.
$93.49 $79.47
-
Cannular Pro 100 mm Chuck for Tin Plated Steel Cans
Carbon Steel Chuck for Cannular Pro Semi-Auto Can Seamer. This 100mm chuck can be swapped in for the standard chuck so you can change from doing aluminum cans to steel cans. This chuck is not compatible with the standard manual Cannular unit. Kegland Part number: KL16766
$21.99 $18.69
-
KOMOS® Outdoor Kegerator Cover
The KOMOS waterproof kegerator cover is perfect for outdoor use. The front panel can be lifted independently so the kegerator door can be opened without removing the whole cover.
$49.49 $42.07
You have seen 144 out of 741 products