Fermentors under 60 Gallons

The FermZilla 60L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing.  It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does not have a dump valve like the FermZilla Conical. For fermenting under pressure or serving out of the All Rounder, we recommend using the Pressure Kit for 55L FermZilla and cutting the dip tube to the appropriate length. The pressure kit is available with either stainless or plastic ball lock caps. What's Included: FermZilla 60L All Rounder Fermenter Stainless Steel Stand Stainless Steel Handle Top Lid with PRV (35 psi) 3-Piece Airlock Adhesive Thermometer Specs: 60 L (15.9 gal) Total Volume Pressure Rated to 2.5 Bar (36.2 psi) Height in Stand - 34" Height w/ Airlock - 36.5" Tank Diameter - 13.9"  Lid Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Kegland Part number: KL15196 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.    

Read more less

Why do home winemakers love using a bucket to ferment and bottle from? EASE!    Going from spigot to bottle will reduce the time your wine is exposed to oxygen. It’s easier to control filling bottles than with a siphon. It’s easy to clean, easy to carry, and easy to transfer. You will love our six gallon, food grade bucket with hole for spigot and external volume markings up to five gallons.   To use as a fermenter you will need to pick up the optional spigot, lid, a stopper, and an airlock.   If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that could scratch the interior surface. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is usually all you need to clean a bucket after fermentation.    Please note: Buckets are translucent and do not come with lids. Buckets are not designed to hold pressure. Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage. Food-Grade to 180° F

Read more less

Made from BPA free PET, this 3 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. You will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Specifications (Not including spigot): Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees Height: 16 inches Diameter: 9 inches Completely taste and odor free

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 120 l (31.7 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 88 cm (34.7") Height x 44 cm (17.3") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

This is the replacement lid for the 20/30 l Speidel Plastic Fermenters.  While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced. This lid fits our 20 l (5.3 gal) & 30 l (7.9 gal) Speidel Plastic Fermenters. Please note: This product consists of 3 pieces.  One outer threaded ring, one top cover and one gasket

Read more less

A small 1 gallon glass jar fermenter that is perfect for testing new things on a small scale or just fermenting a small batch of wine! This unit features a lug-finish glass jar with metal lid. Metal lids won't crack or break like plastic lids, and they provide a much better seal thanks to the thin foam liner underneath. Similar to mason jar lids, the metal lid will show signs of rust over time and need to be replaced, but this won't happen for some time with proper cleaning practices.  Includes: 1 gallon glass jar Screw top lid with hole and airlock grommet S-Shaped airlock

Read more less

The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported to allow a spigot Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Replacement lid for 60L - 500L Speidel Rectangular Plastic Storage tanks.

Read more less

Made from BPA free PET, this 6 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. We recommend our plastic bucket spigot (FE347) and you will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Does not come with spigot.

Read more less

Made from BPA free PET, this 5 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. You will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Specifications (Not including spigot): Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.5 lbs Rated to 140 degrees Height: 19 inches Diameter: 10.5 inches Completely taste and odor free

Read more less

Traditional design meets modern technology and materials Oval design allows for unhindered convection currents during fermenation Supports constant circulation—eliminating hot spots and leading to faster fermentations Smooth interior surface makes cleaning quick & easy Made in Germany by Speidel  The Fermentegg represents a new take on one of the oldest vessel shapes for winemaking. Oval vessels have been used to ferment and store wine for thousands of years, however Speidel's Fermentegg brings this concept to modern times with a lightweight yet heavy duty, food-safe polyethylene construction. The egg shaped vessel results in convection currents during fermentation, unhindered by corners or edges. This movement results in your beer or wine constantly circulating, with an end result of a more complex, yet unified product. Fermentations will generally complete quicker due to the motion of the product, and hot spots will be eliminated as the product remains at a homogenous temperature. Can be used to ferment wine, beer or even cider! Speidel has become known as a forward moving company in fermentation equipment and following in the foot steps of the Speidel Plastic Fermenter, the egg is very easy to clean because of it's smooth inside surface. Specifications: Height: 120 cm Width: 76 cm Lid has a 38 mm hole which can be utilized for use with the Speidel Red Rubber Stopper and Airlock Includes 2 x 1" Male BSPP stainless steel ball valves (H632B recommended for adapting)   Please Note: these vessels are recommended for primary fermentation and short term aging only. They are not pressurizable and may experience oxygen ingress if used for long term storage or prolonged aging.  

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse. These fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

The FastFerment Collection Ball lets you harvest and store your yeast for future batches.  Having an extra ball means you can store yeast from your previous brew, while collecting yeast from your current!  Grab a few of these to keep your favorite strains on hand for fast fermenting anytime!  You will need a FastFerment base unit in order to use this product. Comes with Ball, Union Connection, and stopper.  

Read more less

An affordable way to keep your FastFerment warm or cool. Wrap the Fast Ferment in an insulating jacket and with frozen 2 liter soda bottles or a heating pad you can keep your fermenter at just the right temperature. Works up to 30 degrees F below room temperature. Also works with the mounting brackets so you can still mount it to your wall.

Read more less

This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down! Stainless handles not included with the carrier harness. Kegland Part number: KL13567  

Read more less

Made from BPA free PET, this 5 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. We recommend our plastic bucket spigot (FE347) and you will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Does not come with spigot.

Read more less

Plastic dust cap for 34L narrow mouth demijohn

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 30 l (7.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 40 cm (15.8") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks 500 L size has 2 racking ports, one equipped w/ a Spigot, one covered with a cap. 46"L x 28"W x 43"H, 46.3 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Natural rubber hood for jubs and carboys. Features 3/8 inch hole for airlocks.

Read more less

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing.  It's far more capable than the FermZilla Flat bottom but less complicated and less expensive than the FermZilla Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does not have a dump valve like the FermZilla Conical. For fermenting under pressure or serving out of the All Rounder, we recommend using the Pressure Kit for 55L FermZilla and cutting the dip tube to the appropriate length. The pressure kit is available with either stainless or plastic ball lock caps. What's Included: FermZilla 30L All Rounder Fermenter Stainless Steel Stand Stainless Steel Handle Top Lid with PRV (35 psi) 3-Piece Airlock Adhesive Thermometer Graduation Sticker Specs: 30 L (7.9 gal) Total Volume Pressure Rated to 2.5 Bar (36.2 psi) Height in Stand - 21.7" Height w/ Airlock - 24.2" Tank Diameter - 13.9"  Lid - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Kegland Part number: KL15189 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.  

Read more less

The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

These premium Sansone tanks undergo a special pickling and polishing process to enhance their corrosion resistance, making them ideal for continuous use in both home and commercial settings Crafted from high-quality stainless steel with welded handles for long-lasting performance and easy transport La Nuova Sansone has been crafting high-quality stainless steel containers in Italy for over 40 years, earning a reputation for exceptional design and quality NSF certified stainless steel spigot available for purchase separately The Sansone Europa-AQ model Fusti tank is made from 304 stainless steel with a mirror polish finish and welded handles. Compared to the standard Europa model, the AQ model undergoes an additional pickling and polishing process. This process improves corrosion resistance, which is key for continuous use, especially in commercial settings like wine bars, taprooms, and coffee shops that might use the tank as a self-service water station. Pickling Specialized acids are used to remove any surface impurities, scale, rust, and weld heat-tinted layers. This crucial step eliminates potential corrosion initiation points and ensures a uniformly clean and reactive surface.  Furthermore, pickling promotes the formation of a passive chromium oxide layer, an invisible shield that protects the stainless steel from oxidation and enhances its inherent corrosion resistance. Polishing The pickling process is followed by a thorough polishing treatment. This creates an exceptionally smooth surface finish, minimizing microscopic imperfections where moisture and contaminants could become trapped and initiate corrosion. Polishing also refines the passive layer, making it denser and more uniform for superior protection. Beyond its practical benefits, polishing enhances the aesthetic appeal, making them suitable for even the most visible applications. Benefits The combined pickling and polishing treatments Sansone employs offer a multitude of benefits. The Europa-AQ model Fusti tanks exhibit significantly increased durability and longevity, withstanding harsh environments and frequent use. This enhanced corrosion resistance ensures the quality and taste of stored liquids are preserved, eliminating the risk of contamination from corrosion byproducts. The smooth, clean surfaces created by these processes also facilitate easy cleaning and sanitization, maintaining the highest hygiene standards. Specifications: Capacity - 25L (6.6 gal) Diameter - 360mm (14.17") Height - 320mm (12.59") Opening - 230mm (9.05") Empty Weight - 7.49 lbs Outlet - 1/2" BSP NSF Certified Made in Italy Stainless valve sold separately Please Note: This fusti model does not include a plug for the outlet hole. Please see below for tank valve options.  

Read more less

Degas your wine completely and efficiently with the WineEasy Degassing Kit from Blichmann Engineering! The WineEasy™ Degassing Kit is a vacuum degassing kit from Blichmann Engineering™. No more messing with cumbersome, inefficient stir-type degassers that leave CO2 in solution and cause a mess. With the WineEasy™ Degassing Kit, professionally degassing your wine is as easy as flipping a switch! A vacuum is placed on wine in a carboy through a special stopper, drawing all carbon dioxide out of solution, leaving your wines still and delicious! Degassing usually takes about 30 minutes, depending on the temperature of your wine. We recommend getting your wine up between 75-80 degrees for fastest results. This is the perfect degassing solution for all winemakers!   NOTE: This product can be used by anyone on any wine for degassing. For those with a WineEasy™ Fermentor and Piston, the Vacuum Press Kit for WineEasy™ is recommended for full use with the WineEasy™ system.   The Degassing Kit comes with the following components: Vacuum pump 5 ft piece of 1/4" OD hard plastic vacuum tube 1/4" X 6" stainless steel vacuum tube #7 two-hole silicone stopper #00 solid tan rubber stopper (used to plug the racking tube hole for degassing) Check valve assembly and with spare check ball and check ball seat

Read more less