Dozens of fittings and valves for almost any winemaking application.
Fittings & Valves
Shop By Collection
-
Stainless - 1.5" TC x 1/2" Barb
Convert 1.5" Clover to 1/2" Barb for connecting 1/2" ID Tubing.
$17.99
-
ForgeFit® Stainless Tri-Clamp | 1.5" Clamp
The most popular choice for sanitary connections. Tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 1.5" tri-clamp Made from 304 stainless steel
$7.99
-
ForgeFit® Tri-Clamp Gasket | Silicone | 1.5"
Silicone gasket for 1.5" tri-clamp connection. Temperature rated from -58°F to 446°F.
$1.99
-
Stainless Tri-Clamp - 1.5 in. End Cap
Used to cap a ferrule when not in use, or close off the front end of a valve to keep the interior space sanitary.
$4.39
-
Stainless - 1/2 in. MPT x 5/8 in. Barb (3/8 in. ID)
For Insertion into a ball valve for connecting 1/2" ID line. Made from 304 type stainless steel.
$6.59
-
Stainless Tri-Clamp - 2 in. Clamp
Used to connect two tri-clamp fittings together to make a sanitary connection. 304 stainless steel. For 2" tri-clamp fittings.
$8.79
-
Stainless - 1.5" TC x 1" Barb (Short)
Convert 1.5" Tri-Clamp to 1" Barb for connection of 1" ID tubing. 304-type stainless steel. 1.5" long stem.
$16.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 1.5"
EPDM gasket for 1.5" tri-clamp connection. Temperature rated from -30°F to 300°F. Use color-coded gaskets for different applications to avoid cross contamination. Available in Black, Red, and Blue. Red is commonly used to mark Brettanomyces rubber in breweries that separate brett from brewing yeasts.
$1.99
-
Stainless - 1/2 in. MPT x 3/8 in. Barb (1/4 in. ID)
For insertion into stainless ball valve for connecting 3/8" ID line. Made from 304 Stainless Steel.
$6.59
-
ForgeFit® Stainless Tri-Clamp End Cap | 1.5"
End cap for 1.5" tri-clamp fittings. Made from 304 stainless steel.
$3.99
-
Stainless Ball Valve - 1/2" Full Port
304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.
$17.99
-
1.5 in. TC x 1.5 in. Barb (Long Stem)
Convert 1.5" Tri-Clamp to 1.5" Barb for connection of 1.5" ID tubing. 304-type stainless steel. 4.5" long stem. This long barb is the perfect TC fitting for banded brewery hoses.
$21.99
-
Stainless - T.C. Clamp (2.5 in)
Used to connect two tri-clamp fittings together to make a sanitary connection. 304 stainless steel. For 2.5" tri-clamp fittings.
$10.99
-
ForgeFit® Stainless Tri-Clamp Rotating Racking Arm | 1.5"
Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 10.5" allowing you to draw from roughly 8" above or below the valve level. The arm measures 9.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. Manufactured from 304-type stainless steel with a polished finish. 1.5" tri-clover connection.
$83.49
-
ForgeFit® Stainless Tri-Clamp | 2" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 2" tri-clamp Made from 304 stainless steel
$11.49
-
Stainless - 1.5" TC x 3/4" MPT
Adapt any 3/4" female pipe thread (FPT) fitting to 1.5" TC. AISI304 stainless.
$17.99
-
ForgeFit® Tri-Clamp Gasket | Teflon | 1.5"
Teflon gasket for 1.5" tri-clamp connection. Temperature rated from -100°F to 500°F.
$2.99
-
ForgeFit® Stainless Tri-Clamp Barb | 3/4" Barb x 1.5" T.C.
Convert 1.5" tri-clamp to 3/4" barb for connecting 3/4" ID tubing. Made from 304 stainless steel.
$22.49
-
ForgeFit® Stainless Tri-Clamp Barb | 1" Barb x 1.5" T.C.
Convert 1.5" tri-clamp to 1" barb for connecting 1" ID tubing. Made from 304 stainless steel.
$21.99
-
BrewBuilt® Stainless Ball Valve | 1/2" Locking Full Port
This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing. Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.
$16.49
-
ForgeFit® Stainless Sample Valve | 1.5" T.C.
Plunger-style sample valve with 1.5" tri-clamp connection and 1/2" barb. Made from 304 stainless steel.
$29.99
-
Stainless - 2.5" TC x 2.5" Barb
2.5" Stainless clover clamp x 2.5" Long Barb for hose connection. 304-Type Stainless Steel.
$32.99
-
Stainless Hex Nipple - 1/2 in. x 1 3/4 in. Threaded
An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.
$5.49
-
ForgeFit® Stainless Butterfly Valve | 1.5" T.C.
This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The plastic handle can be rotated 180° for right or left hand operation.
$79.49