Dozens of fittings and valves for almost any winemaking application.
Fittings & Valves
Shop By Collection
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 2"
2" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.5" long.
$92.49
-
ForgeFit® Stainless Tri-Clamp | 4" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 4" tri-clamp Made from 304 stainless steel
$17.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 2.5"
EPDM gasket for 2.5" tri-clamp connection. Temperature rated from -30°F to 300°F.
$1.49
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 5" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$24.99
-
ForgeFit® Stainless Tri-Clamp Quick Disconnect (QD) | Female QD x 1.5" T.C.
Convert 1.5" tri-clamp to Female Quick Disconnect. Perfect for pumping and transferring from or to a tank with tri-clamp connections. Made from 304 stainless steel.
$13.49
-
Stainless Ball Valve - 1/2" - 3 Piece
Heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel. Please note that while we sell plenty of these valves we consider our H602 2-piece ball valve easier to take apart and just as easy to sanitize.
$29.99
-
Stainless Tri-Clamp | 2" T.C. x 3/4" BSPP Female
Convert 3/4" BSPP (Straight Thread) fittings to 2" Tri-Clover.
$28.99
-
Stainless - 4 in. T.C. x 2 in. T.C. Concentric Reducer
Stainless steel Tri-Clamp reducer going from 4" T.C. to 2" T.C. Kegland Part Number: KL06156
$54.99
-
ForgeFit® 2 in. Butterfly Valve Gasket
Replacement gasket for the ForgeFit® 2" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.
$24.49
-
Stainless Tri-Clamp | 1.5" T.C. x 1/2" BSP Female
1.5" tri-clamp with 1/2" BSP female threads. Made from 304 stainless steel. This adapts the beer-in for the Canular KEG500 to TC. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL25362
$16.49
-
Stainless - Full Coupler - 1/2 in.(BSPP)
Full Coupler with 1/2" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless Bushing - 1/2 in. x 3/4 in. BSP
1/2" female x 3/4" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06583
$4.99
-
Brass Hose - Female Hose x 1/2'' fpt Swivel
Female Garden Hose Thread on one side, 1/2" FPT on the other. Useful piece for adapting Quick Disconnects to Wort Chillers or Water Filters.
$3.89
-
Flanged Tri-Clamp Gasket | EPDM | 1.5"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 1.5" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 1.5" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45230 Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
$2.19
-
Flanged Tri-Clamp Gasket | EPDM | 2"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 2" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 2" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45223 Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
$2.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 4"
EPDM gasket for 4" tri-clamp connection. Temperature rated from -30°F to 300°F.
$3.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 4"
End cap for 4" tri-clamp fittings. Made from 304 stainless steel.
$26.49
-
ForgeFit® Stainless Tri-Clamp Elbow | 90° | 2"
304-type stainless steel tri-clamp 90° elbow with 2" clamp ends.
$35.99
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 2.5"
3" x 2.5" tri-clamp concentric reducer. Made from 304 stainless steel.
$49.99
-
ForgeFit® Stainless Butterfly Valve | 3" T.C.
This 3" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation.
$236.49
-
Stainless Hex Nipple - 3/4 in. BSP
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06460
$4.99
-
Stainless Barb - 3/8 in. Male BSPP x 3/8 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644
$3.29
-
Brass Hose - Male Hose x 1/2'' mpt
Useful Part for adapting Garden Hose Thread to standard NPT. Male Garden Hose Thread with 1/2" MPT on the other side.
$7.99
-
Brass - 1/2" Flat Nut
1/2" NPT flat nut
$2.99
-
Stainless Tri-Clamp - 3 in. Elbow
A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected. 304-type polished stainless.
$60.99
-
Stainless Tri-Clamp Sample Valve Shank | 1.5 in. T.C. x Beer Faucet Shank | Intertap® | NukaTap®
These long shanks are suitable to attach to large commercial fermenters and brite tanks with a 1.5" Tri-Clamp Port. Being removable and completely washable it makes this device extremely easy to clean and sanitize before use. Ideally used with the NukaTap Flow Control Faucet with Self-Closing Spring. Please note standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Also compatible with Intertap, Perlick, and other faucets. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
$21.99
-
CIP Spray Ball | 4" x 1.5" Tri-Clamp
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. This stainless steel CIP spray ball kit is perfect for homebrew conical fermenters as many popular units out there feature a 4" T.C. top port or clamp-on lid with 4" T.C. ferrule. Tri-clamp gasket not included. Kit Includes: 4" T.C. Cap with 1.5" T.C. x 1" BSP Male Thread connections 1" BSP x CIP Spray Head Requires pump with 12 GPM flow rate KegLand Part Number: KL22989
$65.99
-
Stainless Barb - 3/4 in. Male BSPP x 3/4 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668
$5.49
-
Stainless - Tri-Clamp Tee (2")
304-Polished Stainless tee with 2" tri-clamp connections.
$40.99
-
Stainless Tri-Clamp | 2" T.C. x 3/4" Female BSP
Convert 3/4" BSP fittings to 2" tri-clamp. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. Kegland Part Number: KL10641
$16.49
-
ForgeFit® Stainless Tri-Clamp End Cap Reducer | 4" x 1.5"
4" x 1.5" tri-clamp reducer. Made from 304 stainless steel.
$52.49
-
Tri-Clamp Gasket (Silicone) - 2 in.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2" tri-clamp fittings. KegLand Part Number: KL03438
$2.19
-
Tri-Clamp Gasket with Stainless Mesh Screen | 16 Mesh | Teflon | 2"
Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 16 which will block particles larger than 1.19mm or 1190 microns. This mesh size makes this screen ideal for use in a filer setup with activated carbon. Kegland Part Number: KL30496
$7.19
-
$5.49
-
Stainless - Cross - 1/2" FPT
Stainless Cross, all 4 openings are 1/2" Female Pipe Thread. Max pressure rating of 150 psi.
$7.69
-
Garden Hose Coupler - 3/4 in. GHT
3/4" female garden hose thread x 3/4" female garden hose thread. Maximum temperature rating - 195°F.
$11.99
-
3 Piece Stainless Ball Valve - 1.5 in. T.C. x 1/2 in. NPT
Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.
$27.49
-
Stainless Bushing - 3/8 in. x 1/2 in. BSP
3/8" female x 1/2" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06576
$3.29
-
Brass - 1/4 in. FPT x 5/16 in. Barb
Brass - 1/4'' FPT x 5/16'' barb
$4.99
-
Brass Hose - Male 3/4 in GHT and 1/2 in FPT
This fitting has 3/4" Male Garden Hose Thread on one side and both 3/4" MPT and 1/2" FPT on the other.
$3.89
-
Brass - 1/2" Coupler
Female 1/2" NPT coupler
$4.99
-
Marchisio Stainless Steel Spigot | 1/4 Turn Ball Valve | 1/2 in. BSP
Stainless steel spigot with quarter-turn ball valve. 1/2 in male BSP threads.
$29.99
-
Stainless - 2 in. T.C. Check Valve (1 PSI)
This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.
$109.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 18" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 18" long.
$34.49
-
Stainless Tri-Clamp Cross - 1.5 in.
This cross fitting features 1.5" T.C. connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.75" long x 5.75" tall Made from 304 stainless steel
$32.99
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 1.5"
Adapt any 3" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 3" T.C to 1.5" T.C. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port and attaching 1.5" tri-clamp fittings. 1.5" x 3" tri-clamp 7" tall Made from 304 stainless steel
$43.99
-
Anvil Ball Valve
Anvil Brewing Equipment ball valve is made from 304 stainless steel. This robust custom designed kettle drain valve has an integral bulkhead seal that forms an extremely rigid and leak-free joint. The convenient ½” NPT male fitting inside of the kettle allows mounting of nearly any accessory. Simple to install in any 7/8” hole and will never leak like other weldless connections! Easy to disassemble and clean. Add our dip tube for a complete draining system! When installed, the valve O-Ring will sit in the groove on the back of the valve, on the outside of the kettle.
$38.49
-
Stainless Barb - 1/2 in. x 1/2 in. Female BSP
Stainless steel barb fitting. 1/2" female BSP x 13mm barb (0.51"). KegLand Part Number: KL03612
$6.59
You have seen 144 out of 253 products