Fittings & Valves

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06460  

Read more less

Useful Part for adapting Garden Hose Thread to standard NPT. Male Garden Hose Thread with 1/2" MPT on the other side.

Read more less

3" x 2.5" tri-clamp concentric reducer. Made from 304 stainless steel.  

Read more less

This stainless steel CIP spray ball kit is perfect for homebrew conical fermenters as many popular units out there feature a 4" T.C. top port or clamp-on lid with 4" T.C. ferrule. Tri-clamp gasket not included. Kit Includes: 4" T.C. Cap with 1.5" T.C. x 1" BSP Male Thread connections 1" BSP x CIP Spray Head Requires pump with 12 GPM flow rate KegLand Part Number: KL22989

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668  

Read more less

304-Polished Stainless tee with 2" tri-clamp connections.

Read more less

A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected. 304-type polished stainless.

Read more less

Convert 3/4" BSP fittings to 2" tri-clamp. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. Kegland Part Number: KL10641  

Read more less

4" x 1.5" tri-clamp reducer. Made from 304 stainless steel.  

Read more less

The BrewBuilt tri-clamp thermometer features a large 3" face for easy reads and 2" probe is less obtrusive in your conical fermenter or T.C. kettle. Dial face reads from 0-220°F and -10-100°C. 3" dial face 2" probe 1.5" T.C. Reads in °F and °C  

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2" tri-clamp fittings. KegLand Part Number: KL03438  

Read more less

3/4" female garden hose thread x 3/4" female garden hose thread. Maximum temperature rating - 195°F.

Read more less

Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.  

Read more less

3/8" female x 1/2" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06576  

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

Read more less

Brass - 1/4'' FPT x 5/16'' barb

Read more less

This fitting has 3/4" Male Garden Hose Thread on one side and both 3/4" MPT and 1/2" FPT on the other.

Read more less

Female 1/2" NPT coupler

Read more less

1/2" NPT flat nut

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 2" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 2" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45223   Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.

Read more less

This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.

Read more less

304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 18" long.  

Read more less

These long shanks are suitable to attach to large commercial fermenters and brite tanks with a 1.5" Tri-Clamp Port. Being removable and completely washable it makes this device extremely easy to clean and sanitize before use. Ideally used with the NukaTap Flow Control Faucet with Self-Closing Spring. Please note standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Also compatible with Intertap, Perlick, and other faucets. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989

Read more less