Freight Only

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Our Cabernet Sauvignon Varietal-Style Wine Base produces a medium-bodied red that is dark in color and robust in nature. A hint of violet is present in the bouquet, typical of this variety. It is superbly enhanced with the addition of oak and does well with age. Each 160L drum produces 460L of finished product (613 x 750ml bottles). May also be used for back sweetening. Products are shelf stable and pre-balanced for pH and Acid. Produces superior finished wine in approximately six weeks. Aseptically packaged for quality assurance. Standard Operation Procedures (SOP) provided. Available year-round. Consistent product rich in color with exceptional flavor and body. Category: Red Size: 160L Yield: 460L Ready Time: 6 Weeks Oak: Unoaked Body: Medium Sweetness: Dry

Read more less

Increases hopping efficiency by 20–40% with its innovative design, including a wedge wire screen for optimal particle separation and clog prevention Supports first wort hopping, hop back usage, biotransformation during fermentation, traditional dry hopping, hop charging during the boil, and fresh fruit additions Allows for easy air purging and wort recirculation, with a straightforward setup for various stages of the brewing process The MB Hop Gun is engineered for efficient and straightforward hop handling. Equipped with a wedge wire screen, it prevents clogging and ensures effective particle separation. The system allows for air purging and the recirculation of wort, fermenting wort, or beer, delivering a 20 to 40% increase in hopping efficiency.  Versatile in its applications, the MB Hop Gun supports first wort hopping by filtering lautered wort, functions as a hop back when positioned before or after the heat exchanger during kettle knockout, and enables hop biotransformation when used on day three of fermentation. Additionally, it facilitates traditional dry hopping post-fermentation and can even be utilized for hop charging during the boil.  The MB Hop Gun is also compatible with fresh fruit additions, broadening its utility for creative brewing applications. Note: The surface is not insulated, so caution is advised when using the device with hot wort. Specs: 1.5" tri-clamp hardware included Top & bottom sight glass Pressure Gauge (0-30 psi) PRV (working pressure 30 psi) Bleed valve Rolling casters w/ brakes Made from 304 stainless steel   Size Net Volume Total Volume Height Tank Diameter* Hop Capcity (Whole Cone) 50L 13.21 Gal 17.17 Gal 59.00" 13.77" 4 lbs 100L 26.42 Gal 36.98 Gal 84.64" 15.74" 8 lbs 150L 39.63 Gal 47.55 Gal 86.61" 17.71" 12 lbs 200L 52.83 Gal 60.76 Gal 86.61" 19.68" 16 lbs *Tank Diameter does not account for piping and tri-clamp fittings.

Read more less

Self-contained brewing system purpose-built for producing large batches of cold brew coffee Cold brew temperature is maintained via coolant circulated around the jacketed tank Rake system ensures all coffee grounds and water are thoroughly and evenly mixed Built-in pump recirculates and clarifies the coffee when extraction is complete 217 Gallon system and above feature coffee ground hydrator and integrated brew deck For detailed power specs, dimensions, and shipping quotes contact our MoreBeer! Pro sales representatives today! The MB Cold Brew Coffee System is a self-contained electric brewhouse used for producing commercial batches of cold brew coffee. After coffee grounds and water are added to the tank, the mixing rake system ensures even distribution and full infusion of grounds and water. Program your preferred brewing temperature between 35-80°F, and the controller will automatically circulate coolant through the tank's cooling jacket to maintain your set temperature. When extraction is complete, the coffee is recirculated until it runs clear, and then passed through a filter on its way to a holding tank where it can be stored until packaging. For additional filtration when transferring liquid to your holding tank, check out the optional Filter Tank. Features: Button control panel Glass grant w/ CIP Viewing port Coffee ground hydrator (7 bbl & above) Brew deck (7 bbl & above) CIP ring below the tank to clean the underside of the screen (7 bbl & above) Liquid level sight gauge Built-in centrifugal pump Pipeline sight glass Square manway & chute All tri-clamp butterfly valves / fittings included 208V 60Hz, 3-Phase Required Power: 31 Gal: 1.3 kW 62 Gal: 1.5 kW 93 Gal: 1.5 kW 155 Gal: 1.85 kW 217 Gal: 1.85 kW 310 Gal: 3 kW Approximate Dimensions:   Length (in.) Width (in.) Height (in.) 31 Gal 63 49 71 62 Gal 65 63 77 93 Gal 69 67 85 155 Gal 77 69 93 217 Gal 93 73 98 310 Gal 98 79 102  

Read more less

Due to high demand, the 6 tap is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   What puts the KOMOS Olympus Kegerator in a league of its own? Spacious all-stainless interior can hold up to TWENTY 5-gallon Slimline Torpedo homebrew kegs Commercial-level refrigeration components provide powerful cooling capacity Double-paned glass doors are self-closing and come with lock & key Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps Choose from the classic stainless or upgraded stainless flow control model Faucets mount to high-quality stainless steel towers, rather than cheap chrome plated towers Interior fan diverts cold air up into the towers to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Swinging glass doors open up to an incredibly spacious interior with enough room to fit up to twenty 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs, or five full sized Commercial Sanke Kegs. If you don't plan on packing it full of kegs, adjustable-height wire racks provide the perfect spot to store bottles and cans. And since they'll be on beautiful display thanks to interior lighting, no more standing with the fridge door open to see what there is to drink! Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated plastic towers, the NukaTap faucets are mounted to stainless steel towers that remain cool before, during, and after each pour thanks to tower fan diverters that recirculate cold air within the kegerator and blows it up into the towers to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Olympus Kegerator include its powerful cooling capacity so your beer will remain cold no matter how many kegs you're storing, high-quality easy to use digital thermostat, stainless steel interior with rubber floor mat, rolling casters, and the included KOMOS Dual Gauge CO2 regulator Forward-sealing Stainless Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use. Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models.  Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.  Added Features All of that cooling power doesn't just keep your kegs cold thanks to the interior tower fan which blows cold air up into your towers to reduce foaming issues. The Olympus also comes standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The recessed drip trays feature a built-in drain so spilled beer won't be hanging around in front of the draft towers. Tubing comes pre-installed and runs to an exterior bottom outlet that can be routed to a floor drain, or you can cut the tubing shorter on the inside and let the beer drain into a bucket. For home setups where a floor drain isn't an option, keeping the bucket inside the kegerator will keep it away from pesky fruit flies and other pests. And to keep everything in tip-top shape, the drip dray's grill is removable anytime you want to wipe down the reservoir or wash the grill.    Feature Summary: Stainless Steel Air Cooled Towers Stainless Steel NukaTap Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Easy to use digital temperature controller Robust KOMOS Dual Gauge Regulator included Commercial grade compressor uses R290 refrigerant Beautiful stainless steel countertop style surface All stainless steel exterior and interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap towers includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2-tap tower and higher only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 ETL Certified Specifications: 90.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 78" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 20 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5 15.5 Gal. Half Barrel Keg (Full Size Keg) - 5   When choosing the number of taps you want, here is the tower configurations you'll receive. Taps Tower 1 Tower 2 2-Tap Single Single 3-Tap Single Double 4-Tap Double Double 5-Tap Double Triple 6-Tap Triple Triple 7-Tap Triple Quad 8-Tap Quad Quad   Detailed instructions for operating the temperature controller are included with the kegerator. For instructions on assembling the tower & line kits, please see pages 7-10 in the manual below. Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

Precision Labeling: Achieve consistent and accurate label placement on bottles of various sizes, ensuring professional presentation and brand integrity. Versatile Labeling Capabilities: Easily adjust settings to accommodate different label sizes and shapes, offering flexibility for diverse labeling needs. High-Speed Performance: Experience rapid label application, significantly boosting productivity and minimizing downtime to keep your operations running smoothly. Durable Construction: Built to withstand demanding industrial environments, the MEP ETC240 is crafted with robust materials and reliable components for long-lasting performance. User-Friendly Design: With its intuitive interface and easy operation, the MEP ETC240 simplifies the labeling process, empowering users to streamline operations and maximize efficiency. Introducing the MEP ETC240 Labeling Machine, a cutting-edge solution designed to streamline labeling processes with precision and efficiency. Engineered with advanced technology and user-friendly features, this labeling machine offers unparalleled performance for wineries of all sizes. With its sleek design and intuitive interface, the MEP ETC240 is easy to operate, allowing users to label bottles of various shapes and sizes with ease. Equipped with adjustable settings, the ETC240 accommodates different label sizes and shapes, giving you the flexibility to meet diverse labeling needs. Its high-speed capabilities ensure rapid label application, boosting productivity and minimizing downtime. Thanks to its durable construction and reliable components, this labeling machine is built to withstand demanding industrial environments, ensuring long-lasting performance and maximum uptime. Plus, its compact footprint saves valuable space on your production floor. MEP has been a trusted supplier of commercial equipment to the wine industry for decades. We are proud to be official distribution partners of MEP, having a direct relationship with ownership. This relationship allows us to service you better, be it questions or replacement parts. Features: AISI 304 stainless steel frame Compatible with round & square bottles Diameter of round bottles: up to 112mm (4.41") Side of square bottles: 65-75mm (2.56" - 2.95") Self-sticking labels on a band wound around a bobbin Max Inner Diameter of the bobbin: 65-75mm (2.56" - 2.95") Max Outer Diameter of the bobbin: 200mm (7.87") Max Height of the band: 140mm (5.51") Capable of applying both front and back labels simultaneously It is preferable to use rectangular labels Possibility to use labels which wind round the bottles (only round bottles) Front and back labels must be located on the same band Labeling time is about 3 seconds 110V, 60 Hz Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

Premium 316 stainless steel construction ensures durability and corrosion resistance, ideal for demanding beverage production environments Wide compatibility with a range of filter cartridges offers adaptability and customization for optimal filtration results in beverage making processes Multiple housings easily work in tandem for sequential filtration with cartridges of different micron ratings, ensuring thorough removal of bacteria for pristine final products The BevBright 30" Stainless Cartridge Filter Housings are designed to streamline your beverage production with unmatched purity and efficiency. Made from premium electropolished 316 stainless steel, these filter housings protect against contamination, ensuring your final product meets the highest standards of quality and taste. Engineered to resist corrosion in challenging environments, they offer durability and reliability. These stainless steel filter housings are essential for precision filtration in beverage production. When used with a sterile filter cartridge, they effectively remove yeast and bacteria, delivering pure, pristine liquid. Tri-clamp ports ensure easy integration into your setup, and the option to daisy-chain filters allows for efficient multi-stage filtration, prolonging the life of your sterile cartridges. BevBright filter housings are compatible with a wide range of filter cartridges, providing the flexibility to meet your specific filtration needs, from standard to sterile filtration. Each unit comes complete with hardware and ready for immediate use. Trust BevBright 30" Stainless Cartridge Filter Housings to maintain the purity and excellence of your beverage from start to finish. Made from 316 Stainless Steel Polish: Ra<0.4um Hardware Included: (2) 1.5" T.C. Pressure Gauges (2) 1.5" T.C. Butterfly Valves (1) 1.5" T.C. Tee (1) Top Relief Valve (2) 1/2" T.C. Drain Valves Clamps & Gaskets Compatible with Scott Labs' ScottCart Code 7: 226 Twist & Lock 30" Cartridges Example images shown. The Filter Housing also includes a 1.5" T.C. Tee & Pressure Gauge and 1/2" T.C.Drain Valves that are not pictured.

Read more less

For use with Stelvin screw caps which offer an airtight seal to preserve flavor, prevents cork taint, and ensures consistent quality This smaller Bordeaux bottle offers the classic shape in a size that's half the volume Antique green glass color is often preferred for red wines to protect them from light during long term storage Farro Glass offers a full lineup of the most essential and commonly used bottles in winemaking Stelvin screw caps offer numerous advantages for wine, including eliminating cork taint, ensuring consistent quality, and preserving freshness through a tight seal that controls oxygen exposure. They are convenient to use, resealable, and cost-effective. Screw caps maintain the wine's flavor and are ideal for both early-drinking wines and some aging styles, thanks to advancements in liner technology. Their secure seal also enhances reliability during shipping and storage, making them a practical and reliable alternative to traditional corks. Stelvin screw caps require specialized machinery to ensure proper sealing. They can not be applied by hand or hand operated devices similar to common hand cappers and hand corkers. A half volume option for the most popular wine bottle in the world. As the name suggests, the Bordeaux bottle (also known as a Claret bottle) originates from the Bordeaux region of France. Easily identified by its wide shoulders and straight body, this bottle style comes in a variety of colors and is suitable for a myriad of wine styles. Brown and dark green are commonly used for reds to protect them from light during long storage periods, while light green and flint are most often used only for white wines that will be consumed much sooner after bottling. These 375 mL bottles are excellent for pricier beverages, or when you want to make sure you're going to finish the bottle without having to open a full 750 mL bottle. Volume: 375 mL Style: Bordeaux / Claret Use: Sangiovese, Tempranillo, Merlot Color: Antique Green Finish: Stelvin / ROPP Bottom: Punted Case QTY: 24 Our Farro Glass Wine Bottles offers a full lineup of the most essential and commonly used bottles in winemaking. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.

Read more less

For use with Stelvin screw caps which offer an airtight seal to preserve flavor, prevents cork taint, and ensures consistent quality This smaller Bordeaux bottle offers the classic shape in a size that's half the volume Clear or "flint" glass is most often used for white wines that will be consumed shortly after bottling with little to no ageing The clear glass is an excellent choice for rosé wine to show off the alluring color of the beverage Farro Glass offers a full lineup of the most essential and commonly used bottles in winemaking Stelvin screw caps offer numerous advantages for wine, including eliminating cork taint, ensuring consistent quality, and preserving freshness through a tight seal that controls oxygen exposure. They are convenient to use, resealable, and cost-effective. Screw caps maintain the wine's flavor and are ideal for both early-drinking wines and some aging styles, thanks to advancements in liner technology. Their secure seal also enhances reliability during shipping and storage, making them a practical and reliable alternative to traditional corks. Stelvin screw caps require specialized machinery to ensure proper sealing. They can not be applied by hand or hand operated devices similar to common hand cappers and hand corkers. A half volume option for the most popular wine bottle in the world. As the name suggests, the Bordeaux bottle (also known as a Claret bottle) originates from the Bordeaux region of France. Easily identified by its wide shoulders and straight body, this bottle style comes in a variety of colors and is suitable for a myriad of wine styles. Brown and dark green are commonly used for reds to protect them from light during long storage periods, while light green and flint are most often used only for white wines that will be consumed much sooner after bottling. These 375 mL bottles are excellent for pricier beverages, or when you want to make sure you're going to finish the bottle without having to open a full 750 mL bottle. Volume: 375 mL Style: Bordeaux / Claret Use: Pinot Grigio, Sauvignon Blanc, Chenin Blanc Color: Flint / Clear Finish: Stelvin / ROPP Bottom: Punted Case QTY: 24 Our Farro Glass Wine Bottles offers a full lineup of the most essential and commonly used bottles in winemaking. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.

Read more less

The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters. Please note the kegerator does not come with a plug for the tower holes. The Olympus is intended to be paired with standard 3" diameter draft towers or the KOMOS Quad Tap Tower kits. Feature Summary: Easy to use digital temperature controller Commercial grade compressor uses R290 refrigerant Tower cooling fan Beautiful stainless steel countertop style surface All stainless steel interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside ETL Certified CO2 Regulator, tower, draft lines not included Specifications: 90.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 78" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 20 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5 15.5 Gal. Half Barrel Keg (Full Size Keg) - 5   Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters. Please note the kegerator does not come with a plug for the tower hole. The Olympus is intended to be paired with a standard 3" diameter draft tower or one of the KOMOS Quad Tap Tower kits. Feature Summary: Easy to use digital temperature controller Commercial grade compressor uses R290 refrigerant Tower cooling fan Beautiful stainless steel countertop style surface All stainless steel interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside ETL Certified CO2 Regulator, tower, draft lines not included Specifications: 58.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 46.5" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 12 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 12 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 3   Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation, and transportation Designed with a palletized base, built-in forklift channels, and a sturdy galvanized cage for easy movement and stacking up to 2-high Made from high-quality 304 stainless steel, ensuring durability and a hygienic environment for fermenting or aging beverages Lid features a 1.5" T.C. ferrule, allowing for the addition of a spunding valve, CIP spray ball, or other accessories Full draining bottom outlet with a 1.5" T.C. butterfly valve for efficient liquid transfer External cooling jacket with 1.5" T.C. inlet and outlet Also available without the cooling jacket Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation and transportation. Crafted from high-quality 304 stainless steel, these tanks ensure an airtight, hygienic environment that preserves the quality of both raw ingredients and finished beverages. The built-in forklift channels and robust outer cage make them easy to move around your facility, even when full, and allow them to be stacked on top of each other 2-high. These tanks feature a wide 15.75" lid opening with a 1.5" tri-clamp ferrule in the lid, allowing you to add a spunding valve for fermentation or CIP spray ball of cleaning. The 1.5" T.C. bottom outlet includes a stainless steel butterfly valve. Stainless steel IBC tote 1,000 L / 265 Gallons / 8.5 bbl capacity 1040L / 275 gallons Nominal Capacity (filled to brim) Welded cooling jacket with 1.5" T.C. In/Out 2mm thick 304 stainless steel Passivated Internal BA finish External satin finish Full draining bottom with 1.5" T.C. butterfly valve Upper lid diameter: 15.75" (400mm) 1.5" T.C. ferrule in lid Palletized base with fork lift slots Galvanized cage 44.6" x 44.6" x 57.4" Please Note: Do not stack more than 2 tanks, even when empty. Only move one tank at a time. Never move stacked tanks whether full or empty. The tank must be handled by means of the forks only from the front side. Never use the forks from the side.  

Read more less

Combines all the benefits and advantages of our best-selling rubber impeller Enoitalia Euro Pumps with inline volume measurement.  This is a pump with a brain! Enter in the volume of wine you would like to pump and the EuroFill turns off when that volume has been pumped. With a built-in flow meter, PLC (programmable logic controller) and a touch screen this pump will reduce human error and make your cellar life a lot easier. Filling barrels, blending exact volumes of wine, and dosing larger tanks with specialized ingredients are a few of the most useful applications. You can also control pumping by time which can be useful for pump overs and cleaning solutions.   Includes a wireless remote control.  Made by Enoitala, a pump specialist, in Tuscany Italy.  Sold and supported in the USA by MoreWine!.  Unique Applications: Know the volume pump during any transfer Program an exact volume you want pumped Easily create perfect blends Fill barrels by volume (and then top off) Can be used for all general pumping application Features: Rubber impeller pump with electronic speed control Programmable Logic Controller (PLC) for manual or automatic operation Endress induction flow meter Programmable dosing, counting, and timer Remote control 7" Touchscreen Stainless steel control panel and trolley Dry run protection Pressure switch Specifications: Capacity: 0-6,340 GPH (0-24,000 L/h) Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clamp Inlet/Outlet 220V, Single Phase 4 kW Please note: the unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and controls to the motor.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 500L Specifications: Nominal volume: 500 Liters (132.0 gallons) Effective volume: 514 Liters (135.7 gallons) Diameter: 79 cm (31.1 inches) Height: 100 cm (39.3 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 400L Specifications: Nominal volume: 400 Liters (105.7 gallons) Effective volume: 424 Liters (112 gallons) Diameter: 65 cm (25.5 inches) Height: 130 cm (51 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 300L Specifications: Nominal volume: 300 Liters (79.2 gallons) Effective volume: 305 Liters (80.5 gallons) Diameter: 65 cm (25.5 inches) Height: 100 cm (39.3 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Features cooling jacket, thermometer & thermowell, and 1.5" tri-clamp port with butterfly valve Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 197 Liters (52 gallons) Diameter: 65 cm (25.5 inches) Height: 65 cm (25.5 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Made to pair with the EnoItalia Lobe Rotor Pump, the optional receiving hopper can be used under a destemmer crusher to collect whole destemmed, or crushed grapes. Max capacity 50,700 lbs with destemmed grape, and 44,000 lbs with fermented grape. 220V 3 Phase 0.75 kW

Read more less

Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (40) 40cm x 40cm plates 4,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 4,000L (1,056 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 40 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 67.7" x 26" x  x 35.5" 518 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE Compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon. Warning: You will need to remove the unit from the shipping pallet using a forklift and straps. Do not use a fork lift to directly lift from the bottom of the unit. Doing so may damage the bottom tray.

Read more less

Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (20) 40cm x 40cm plates 2,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 2,000L (528 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 20 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 47.5" x 26" x 35.5" 363 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon.

Read more less

Self-priming wine pump with variable flow control from 0 to 20 gallons per minute Flexible rubber impeller gently pushes wine Stainless steel pump head with 1.5" tri-clamp connections Remote control operation with 40 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The perfect pump for moving wine from one vessel to the other.  These Flexible Impeller Pumps are controlled by a Variable Frequency Drive, allowing for wine or juice transfers as fast as 20 gallons per minute, down to a complete stop.  A sturdy Stainless Steel cart with nylon wheels allows for easy manueverability in the winery, and a lifetime of use.  The pump can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. We worked for a year to develop this particular pump with Enoitalia of Italy.  The value and price are really amazing. So much that we stopped making our own line of Chunky Pumps at the end of 2016.  Enoitalia has been making pumps for decades and while they are excellent at destemmer crushers and other equipment, pumps are their core specialty.  We will support the pump in the USA with common spare parts but we also have the backing and support of Enoitalia if anything was to go wrong. Although the Euro 30 is self-priming, the pump should never be run dry. Stainless steel head with flexible rubber impeller Remote control with 40' cord  included VFD allows for flow rate from 0 to 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input voltage required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery The pump is reversible and can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. Please Note: This pump will NOT come with fittings.   It will have 1.5" Tri Clamp ferrules, and the appropriate fittings can be chosen from YMANs below.

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 3850 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 2200 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1600 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Double jacket for glycol cooling Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a double jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1100 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less