Detecting your location...

Siphoning Assemblies & Accessories

Siphon assemblies work using gravity and rely on the fact that liquid always flows downward to the lowest point. In order to use a siphon, the vessel you are siphoning from needs to be positioned above the vessel you are racking into. Here are a few recommendations to help make your siphoning experience a positive and productive one:

  • Sanitize everything that will come into contact with the wine! Before using your siphon set-up, make sure to sanitize the entire assembly (MoreWine! recommends using StarSan or SaniClean, but a traditional acidulated SO2 solution will work as well).
  • If you need to move the vessel you are racking, we recommend moving it 1-2 days before doing the transfer. This will allow any lees that get churned up into the wine when the vessel got moved to settle out again.
  • If you are new to siphoning, practice your technique using water before trying it out on your wine!
41 products

  • Racking Tube - Replacement Tip - 3/8 in Stainless Steel Racking Tube - Replacement Tip - 3/8 in Stainless Steel

    Anti Sediment Replacement Cap for Racking Cane

    8 reviews

    Stainless steel anti-sediment tip for 3/8 inch racking canes. Replaces plastic caps.

    $4.89

  • Auto-Siphon Carboy Clip - For 1/2 inch Auto-Siphon Carboy Clip - For 1/2 inch

    $6.59

  • Plastic Ball Valve (1/2 in)

    Plastic Ball Valve (1/2")

    1 review

    An inline plastic valve with 1/2" barbed inlet and outlet. Not designed to work with hot liquids or situations involving pressure (use a brass or stainless ball valve in those situations.)

    $4.39

  • Auto-Siphon Starter - 7/16 in Large Auto-Siphon Starter - 7/16 in Large

    Auto Siphon Starter - 7/16 in Large

    1 review

    Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation. The Large Auto Siphon is recomended for use with standard buckets and carboys. We strongly recomend you use 7/16 in ID tubing (not 1/2 in) to prevent air leaks from stopping the siphon.

    $17.99

  • Auto-Siphon Carboy Clip - For 3/8 inch Auto-Siphon Carboy Clip - For 3/8 inch

    Auto Siphon Carboy Clip - For 3/8 inch

    3 reviews

    Clamps to buckets, carboys and other containers. Holds the Auto Siphon securely above the sediment while transferring. To use, simply snap on the Auto Siphon, slide down to the desired level, and then snap off when done. Use the 3/8 inch Auto Siphon Clip for Mini and Regular 3/8 inch Auto Siphons.

    $6.59

  • Eno24 Flow Meter - L/Gal Eno24 Flow Meter - L/Gal

    Digital Flow Meter - Liters/Gallons

    2 reviews

    Digital flow-meter perfect for winemaking, beer making, cider making and more. Equipped with reset function, a cumulative totalizer reset, and a non-resettable totalizer. Calibration function to adapt the instrument to fill by gravity, or to fill with transfer pumps. Features: Capacity from 30L/7.9G to 130L/34.3G per minute Display changeable from liters to gallons Minimum pressure 0,3 bar, maximum pressure 16 ba 1" BSPP (straight thread) outlets (includes 1" barbs) Accuracy + -1% of indicated value after calibration Repeatability + – 0.3% Battery Powered Rated to a maximum temperature of 85 C°(185 f°) The 50C rating in the manual is a typo.

    $319.99

  • Racking Tube - Stainless Steel - 3/8 in x 30 in

    Racking Tube - Stainless Steel - 3/8 in. x 26 in.

    5 reviews

    Stainless Steel racking cane - 3/8 inch OD x 26 inches long from tip to bend (30" total), with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    $16.49

  • Semiautomatic Shutoff Tap Semiautomatic Shutoff Tap

    Semiautomatic Shutoff Tap

    A semiautomatic shutoff tap that makes siphoning or bottling even easier. Flow is restricted through the tap unless it is pushed down into the mouth of a bottle or small jar. The tap can be used with a blow siphon to create the siphon.

    $7.69

  • Siphoning Set Up (3/8 in.)

    Siphoning Set Up (3/8'')

    2 reviews

    30'' x 3/8" OD acrylic racking cane, 5' hose, racking clip, hose clamp.  Use to siphon beer or wine from vessel to another. 

    $10.99

  • Sterile Siphon Starter - For 6.5 Gallon Carboy with threaded neck

    Sterile Siphon Starter - For 6.5 Gallon Carboy with threaded neck

    13 reviews

    The easiest way to start a siphon! Simply blow into the sterile filter, which slightly pressurizes the carboy, causing beer to flow out. This is hands down superior to the numerous other methods of starting a siphon (and we have tried them all!) No sucking the end of the tube, no plungers with faulty gaskets, no shaking, no filling up the tube with unsterilized water, nothing to break, no contamination, no disturbing the sediment, and no fuss. Can you tell we really like it! How to Use Attach the Sterile Siphon starter assembly by firmly pushing the orange or yellow carboy hood over the mouth of the carboy. Slide the stainless racking cane to the desired depth, just about the sediment level and blow into the white, sanitary air filter for 2-3 seconds. Blowing through the filter forces beer out through the racking cane, starting the siphon. There is no need to worry about contamination from your mouth, as the sanitary filter removes 99.98% of airborne bacteria. For a video demonstration, check out the video below. Tip to Remove Oxygen in Line We suggest that as your starting the siphon you pinch the clear, flexible tubing near the racking cane. Release the pinch on the tubing after 1-2 seconds, while continuing to blow through for an additional second. This will cause the clear vinyl tubing to fill completely with beer, eliminating oxidation that can occur in siphoning when your line is not completely full and beer is mixing with oxygen. Special Tip for Additional Use of Sterile Siphon Starter on Brew Day During the brew day fill your carboy with sanitizer as normal. Take the red tip off the end of the stainless racking cane and insert Siphon Starter assembly into carboy filled with sanitizer. Blow on filter to begin siphoning sanitizer out of carboy. As the sanitizer empties the carboy fills with filtered air, leaving a sanitized, bacteria free environment to fill your beer into. Sterile Siphon Includes: 26 inch Stainless Racking Cane Red Sediment Reduction Tip Orange Carboy Hood for 6.5 Gallon Carboy with threaded neck 5' 3/8" ID Vinyl Tubing Stainless Hose Clamp Sterile Air Filter About the White Sterile Filter: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. Note: The color of the hood you recieve may vary from the hood that is pictured.

    $24.99

  • The Easy Siphon Clip The Easy Siphon Clip

    Easy Siphon Clip

    The Easy Siphon Clip holds your Easy Siphons to Carboys, Pails, Fermonsters, Buckets and more! Made from lasting plastic materials, so you can clip and unclip your Easy Siphons without issues. Works with: Easy Siphon 3/8" & 1/2" (R511 / R513) 2022 models - 7/8" thick Mini Easy Siphon  The Sample Taker (MT342) Legacy Easy Siphon 3/8" & 1/2" (R510 / R512) pre-2022 Models - 1" thick Please note: if the clip is used with the Legacy Easy Siphons (pre-2022 models), it will not work with the new models afterwards as the clamps will stretch to adapt to the bigger diameter of the older models.  

    $4.99

  • Extra Anti-Sediment Tip for 1/2 in Auto-Siphon Extra Anti-Sediment Tip for 1/2 in Auto-Siphon

    Extra Anti-Sediment Tip for 1/2 in Auto-Siphon

    Replacement anti-sediment tip for 1/2 in Auto-Siphon

    $5.49

  • Extra Anti-Sediment Tip for 3/8 in Auto-Siphon

    Extra Anti-Sediment Tip for 3/8 in Auto-Siphon

    Replacement anti-sediment tip for 3/8 in Auto-Siphon

    $5.49

  • Push Tap

    Push Tap

    1 review

    This is a great addition to most siphon setups as it can be used to control the flow of liquid.  1/2" Diameter tubing will fit onto this, and the switch on the side turns the liquid flow on or off. 

    $4.39

  • The Mini Easy Siphon - 3/8 in.

    The Mini Easy Siphon - 3/8 in.

    1 review

    For siphoning out of small jugs and growlers. Comes with 3/8" cane. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. 15" racking tube. Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage.

    $10.99

  • The Vintage Shop - Bottle Filler With Removable Spring (3/8 in.) The Vintage Shop - Bottle Filler With Removable Spring (3/8 in.)

    Bottle Filler with Removable Spring | 3/8"

    What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12" long.

    $4.99

  • Kegland - 0.2 Micron Air Filter - Airlock or Aeration Kegland - 0.2 Micron Air Filter - Airlock or Aeration

    Compact Sanitary Filter

    These 0.2 Micron Air Filters have a fine enough filter membrane that they can filter out microbes and bacteria. They can be used with any oil free air compressor such as a pond pump, or other type of pump. They can also be used as an airlock in the top of your fermenter or used to filter air going back into a cask when dispensing real ale.  This filter is not suitable for liquids and should be discarded if it gets wet. Compatible with 4 mm ID EVABarrier tubing. You will need to heat up the tubing and use needle nose pliars to widen the inner diameter. No hose clamp required. Specs: 0.2 Micron Pore Size PE Membrane Suitable for 3/16" ID tubing KegLand Part Number: KL08587    

    $4.39

Login

Forgot your password?

Don't have an account yet?
Create account