Speidel

Stainless Spigot for the Speidel plastic fermenter. This is a great upgrade if you are looking to improve your fermenter with a sturdier spigot. Made from 304 stainless steel. 3/8" barb on outlet

Read more less

This is a replacement cap for our line of Speidel Plastic Fermenters.  It has a gasketed seal, and serves to close the fermenter.  This is also the same cap used on our Speidel Tank Airlocks.

Read more less

Replaces the rubber airlock stopper that comes with our Speidel plastic tanks. Does Not include the airlock shown in the photo. Stopper height: 1 3/8". Upper diameter 1 3/4". Lower diameter 1 7/16". Inner diameter 11/16". Color may vary.

Read more less

Replaces the oversized airlock that comes with our Speidel plastic tanks. Does Not include the stopper shown in the photo. Height 5 3/8". Outer diameter 2 7/8". Stem outer diameter 23/32". Stem inner diameter 9/16".

Read more less

Silicone gasket to fit our Speidel plastic tank adapters (FE740, FE741, FE742, FE745, FE746).

Read more less

Replaces the spigot and collar that come with our Speidel plastic tanks.

Read more less

This is the replacement gasket that seals the lid onto the body of the plastic Speidel fermenters. This gasket generally does not wear down through normal use and need to be replaced. That being said, everyone seems to manage to find creative ways to use our equipment that results in needing replacement parts! This gasket fits our 60l(15.9 gal) & 120L (31.7 gal) Speidel Round Plastic Fermenters.

Read more less

Replacement lock nut that comes with the Speidel plastic tanks.

Read more less

Using your existing Speidel lock ring and gasket this airlock cap screws right into the lid of your Speidel plastic fermenters. The grommet will fit standard 3-Piece or S-Shaped airlocks. The cap also provides a tighter seal because it is screwed into the cap where as the Speidel stopper only pushes into the lid.

Read more less

This attachement can be used to replace the spigot or the airlock on your Speidel plastic fermenter and give you a 1/2 in. MPT to the outside and a 1/2 in. FPT on the inside. This allows you to attach a variety of components on the inside and outside of your fermenter. This coupling uses the standard speidel lock ring and gasket.

Read more less

Looking to add a thermowell to your Speidel plastic fermenter? This is the perfect way to do it. This thermowell replaces the airlock on top of your fermenter and uses the standard Speidel locking nut and gasket. The rubber grommet will fit standard 3/8 in. airlocks and the thermowell will accept most temperature probes. Please note that while using the stock spigot lock ring and gasket for the thermowell, you will have to use the solid locking cap where the spigot is normally located. In order to use the thermowell and spigot silmultaneously, you will need to purchase a second spigot or lock nut.

Read more less

Stainless dip tube for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.

Read more less

Apply this volume marker strip to your Speidel Plastic Fermenter for quick volume reads. Indication in liters and gallons. Intended for use with 60L plastic fermenter (FE720). Marker Strip only. Fermenter not included.

Read more less

Stainless dip tube and thermowell for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.

Read more less

This is the replacement lid for the 20/30 l Speidel Plastic Fermenters.  While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced. This lid fits our 20 l (5.3 gal) & 30 l (7.9 gal) Speidel Plastic Fermenters. Please note: This product consists of 3 pieces.  One outer threaded ring, one top cover and one gasket

Read more less

This is the replacement gasket that seals the lid onto the body of the plastic Speidel fermenters. This gasket generally does not wear down through normal use and need to be replaced. That being said, everyone seems to manage to find creative ways to use our equipment that results in needing replacement parts! This gasket fits our 12L (3.2 gal) Speidel Round Plastic Fermenter.

Read more less

Replacement gasket for the plastic spigot that comes with Speidel plastic fermenters.  

Read more less

Compatible with WE369C, WE369E, WE369F.

Read more less

Speidel 1" DIN to 1.5" TC adapter. If you have a mixture of TC and DIN fittings, there is finally an adapter to help you connect everything together. To top it all off it is made with the expert craftmanship of Speidel.

Read more less

Monitor and track your fermentation from your computer or phone with Speidel's new Garspundmobil. The monitor sits on your Speidel airlock and measures temperature and counts the number of bubbles coming from your fermentation. It uses this information to show you how active your fermentation is and estimate the gravity. Features: Measures fermentation activity by counting the number of bubbles passing through your airlock Measures temperature of your fermentation Sends this information to MySpeidel wirelessly Uses network standard: IEEE 802.11 b/g/n Device's status is shown through a light inside the unit USB cable included

Read more less

This insulating neoprene sleeve will help maintain stable temperatures in your Speidel flat bottom tank. Suitable for 15L, 30L, or 60L sizes.  

Read more less

Compatible with WE369J, WE369M, WE369O, WE369Q, WE369S, WE369T, WE369V, WE369W, WE369X.

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.   Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1100 L.  Open top, 1183 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Stainless steel storage rack for Speidel Flat Bottom Tanks 550mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 650L tank GER650VF. Base Height: 15.9"

Read more less