Stainless Steel Threaded Fittings & Valves
-
Stainless - 1/2 in. MPT x 5/8 in. Barb (3/8 in. ID)
For Insertion into a ball valve for connecting 1/2" ID line. Made from 304 type stainless steel.
$6.59
-
Stainless - 1/2 in. MPT x 3/8 in. Barb (1/4 in. ID)
For insertion into stainless ball valve for connecting 3/8" ID line. Made from 304 Stainless Steel.
$6.59
-
Stainless Ball Valve - 1/2" Full Port
304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.
$17.99
-
BrewBuilt® Stainless Ball Valve | 1/2" Locking Full Port
This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing. Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.
$16.49
-
Stainless Hex Nipple - 1/2 in. x 1 3/4 in. Threaded
An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.
$5.49
-
Stainless - 1/2 in. FPT x 1/2 in. Barb
Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!
$6.59
-
Stainless Nipple - 1/2'' x 1" Threaded
Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.
$3.89
-
Stainless Ball Valve - 3/4" Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.
$24.49
-
Stainless - Full Coupler - 1/2 in.
Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.
$4.39
-
Stainless - 1/2 in. FPT Tee
304 Stainless, 1/2" Female Pipe Thread on all three openings. 2" length x 1.5" width
$6.09
-
Stainless Street Elbow - 1/2'' fpt x 1/2'' mpt
1/2" Female thread on one side and 1/2" male thread on the other. Called a street elbow because of the female threads on one side and the male threads on the other. Made from 304 type Stainless Steel.
$6.09
-
Stainless Coupler - 3/4" FPT x 1/2" FPT
A stainless steel coupler with 3/4" FPT x 1/2" FPT threads. Great for March Pumps with a 3/4" Center Inlet!
$5.49
-
Stainless 1/2 in MPT Plug - Hollow
Stainless 1/2 in MPT Plug. Hollow behind threads
$6.59
-
Stainless - Nipple - 1/2 in. x 1.5 in.
A stainless steel nipple used to combine two fittings with 1/2" FPT threads. There is a 1/2'' space between threads.
$3.29
-
Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT
Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT Please Note: Valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.
$28.99
-
$8.79
-
Stainless Nipple - 3/4" x Close
Stainless Nipple - 3/4" x Close
$5.49
-
Stainless Nipple - 1/2" x 2" Threaded
Stainless Nipple - 1/2" x 2" Threaded There is approximately a 1/2" of thread on both side of this fitting and a one inch section that is unthreaded.
$4.39
-
Stainless - Elbow - 1/2 in. FPT x 1/2 in. FPT
Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.
$6.09
-
Stainless Ball Valve - 1" Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Please Note: the ball valve may be difficult to turn at first, but it will become less resistant after it is rotated back and forth a couple times.
$29.99
-
Stainless - 1" MPT x 1/2" FPT Bushing
This bushing is to use when you want to use your larger pumps with an other fitting.
$6.09
-
Stainless - 1 in. Full Coupler BSPP
Full Coupler with 1" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$7.69
-
Stainless Barb - 1/2 in. x 1/2 in. Male BSP
Stainless steel barb fitting. 1/2" male BSP x 13mm barb (0.51"). KegLand Part Number: KL03629
$6.59
-
Stainless - Full Coupler (1 in.)
Full Coupler with 1" Female Pipe Thread. Full couplers have threads for insertion from both sides.
$5.49
