Stainless Steel Threaded Fittings & Valves
-
Stainless - 1/2 in. MPT x 5/8 in. Barb (3/8 in. ID)
For Insertion into a ball valve for connecting 1/2" ID line. Made from 304 type stainless steel.
$6.59 $4.28
-
Stainless - 1/2 in. MPT x 3/8 in. Barb (1/4 in. ID)
For insertion into stainless ball valve for connecting 3/8" ID line. Made from 304 Stainless Steel.
$6.59
-
Stainless Ball Valve - 1/2" Full Port
304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.
$17.99
-
BrewBuilt® Stainless Ball Valve | 1/2" Locking Full Port
This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing. Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.
$14.99 $12.74
-
Stainless Hex Nipple - 1/2 in. x 1 3/4 in. Threaded
An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.
$5.49 $4.67
-
Stainless - 1/2 in. FPT x 1/2 in. Barb
Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!
$6.59
-
Stainless Nipple - 1/2'' x 1" Threaded
Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.
$3.89
-
Stainless - Full Coupler - 1/2 in.
Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.
$4.39
-
Stainless Ball Valve - 3/4" Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.
$24.49
-
Stainless - 1/2 in. FPT Tee
304 Stainless, 1/2" Female Pipe Thread on all three openings. 2" length x 1.5" width
$6.09 $4.57
-
Stainless Coupler - 3/4" FPT x 1/2" FPT
A stainless steel coupler with 3/4" FPT x 1/2" FPT threads. Great for March Pumps with a 3/4" Center Inlet!
$5.49
-
Stainless 1/2 in MPT Plug - Hollow
Stainless 1/2 in MPT Plug. Hollow behind threads
$6.59
-
Stainless - Nipple - 1/2 in. x 1.5 in.
A stainless steel nipple used to combine two fittings with 1/2" FPT threads. There is a 1/2'' space between threads.
$3.29
-
Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT
Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT Please Note: Valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.
$28.99
-
$8.79 $7.47
-
Stainless Nipple - 3/4" x Close
Stainless Nipple - 3/4" x Close
$5.49
-
Stainless Nipple - 1/2" x 2" Threaded
Stainless Nipple - 1/2" x 2" Threaded There is approximately a 1/2" of thread on both side of this fitting and a one inch section that is unthreaded.
$4.39 $2.85
-
Stainless Barb - 1/2 in. x 1/2 in. Male BSP
Stainless steel barb fitting. 1/2" male BSP x 13mm barb (0.51"). KegLand Part Number: KL03629
$6.59 $4.28
-
Stainless - Elbow - 1/2 in. FPT x 1/2 in. FPT
Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.
$6.09
-
Stainless Ball Valve - 1" Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Please Note: the ball valve may be difficult to turn at first, but it will become less resistant after it is rotated back and forth a couple times.
$29.99 $22.49
-
Stainless - 1 in. Full Coupler BSPP
Full Coupler with 1" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$7.69
-
Stainless - 1" MPT x 1/2" FPT Bushing
This bushing is to use when you want to use your larger pumps with an other fitting.
$6.09
-
Stainless - Full Coupler (1 in.)
Full Coupler with 1" Female Pipe Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless Hex Nipple - 1/2 in. BSP
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/2" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06453
$3.89
-
$4.39
-
Stainless Barb - 1/4 in. Male BSPP x 5/16 in. Hose Barb
This Stainless Steel BSPP barb will connect any tubing with a 5/16" ID line to any fitting with a 1/4" Female BSPP connection. The barb is slightly oversized at 8mm (0.315") compared to 5/16" (0.3125") which will give you a tighter connection with your tubing. KegLand Part Number: KL06637
$2.79
-
Stainless Nipple - 1/4" x Close
Stainless Nipple - 1/4" x Close Overall length - 7/8"
$3.99
-
Stainless Ball Valve - 1/2" - 3 Piece
Heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel. Please note that while we sell plenty of these valves we consider our H602 2-piece ball valve easier to take apart and just as easy to sanitize.
$29.99 $19.49
-
Stainless Bushing - 1/2 in. x 3/4 in. BSP
1/2" female x 3/4" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06583
$4.99
-
Stainless - Full Coupler - 1/2 in.(BSPP)
Full Coupler with 1/2" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless Barb - 3/8 in. Male BSPP x 3/8 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644
$3.29
-
Stainless Hex Nipple - 3/4 in. BSP
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06460
$4.99
-
Stainless Barb - 3/4 in. Male BSPP x 3/4 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668
$5.49 $3.57
-
Stainless Bushing - 3/8 in. x 1/2 in. BSP
3/8" female x 1/2" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06576
$3.29
-
3 Piece Stainless Ball Valve - 1.5 in. T.C. x 1/2 in. NPT
Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.
$27.49 $23.37
-
Garden Hose Coupler - 3/4 in. GHT
3/4" female garden hose thread x 3/4" female garden hose thread. Maximum temperature rating - 195°F.
$11.99
-
Stainless - Cross - 1/2" FPT
Stainless Cross, all 4 openings are 1/2" Female Pipe Thread. Max pressure rating of 150 psi.
$7.69
-
$5.49
-
Stainless Plug - 1/4 in. BSPP
1/4" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06392
$2.79
-
Stainless Barb - 1/2 in. x 1/2 in. Female BSP
Stainless steel barb fitting. 1/2" female BSP x 13mm barb (0.51"). KegLand Part Number: KL03612
$6.59 $4.28
-
KOMOS® | Stainless Barb | 1/4 in. MPT x 5/16 in. Barb | 2-Pack
Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.
$7.69
-
Stainless Elbow - 1/2 in. Male BSP x 1/2 in. Female BSP
Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06620
$5.49 $3.57
-
Stainless Coupler - 1/2 in. BSPP x 3/8 in. BSPP
Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/8" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10580
$3.89
-
Stainless Lock Nut - 3/4 in. BSPP
Stainless Lock Nut. 3/4 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06538
$3.29
-
Stainless Plug - 1/2 in. BSPP
1/2" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06408
$2.79
-
Compression Fitting - 12.7 mm to 1/2 in. BSP
These compression fittings are the most common type to be used with immersion chillers on the market today. We highly recommend using these fittings on any and all immersion / ice bucket chillers to optimize the ability to quicky disconnect the liquid hosing for storage and ease of cleaning. The industry standard fittings are Camlocks which can be found here. These fittings have a pressure rating of 4500psi. Instructions: Tighen the fitting up finger tight. Mark the female and male threaded pars with a texter or marker. Further this fitting 1 and 1/4 turns to ensure correct compression has been achieved. KegLand Part Number: KL02004
$9.89
-
Stainless Half Coupler 1"
Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$5.49
-
Stainless Half Coupler - 1/2"
Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will need to punch a 7/8" hole to install.
$5.49
You have seen 48 out of 85 products