Stainless Steel Tri-Clamp Fittings & Valves

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections Silicone gaskets have a wide temperature range and are recommended for hot side applications For 8" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both Silicone and EPDM. Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 8" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F KegLand Part Number: KL44790

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections Silicone gaskets have a wide temperature range and are recommended for hot side applications For 4" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both Silicone and EPDM. Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 4" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F KegLand Part Number: KL44806

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections Silicone gaskets have a wide temperature range and are recommended for hot side applications For 1.5" tri-clamp connections Flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both Silicone and EPDM. Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 1.5" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F KegLand Part Number: KL44837

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 8" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 8" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45193   Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 4" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 4" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45209   Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 3" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 3" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45216   Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.

Read more less

Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 1.5" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 1.5" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45230   Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.

Read more less

Convert standard 5/8" beer thread to 1.5" tri-clamp. Made from 304 stainless steel.

Read more less

EPDM gasket for 3.5" tri-clamp connection. Temperature rated from -30°F to 300°F. This gasket is a direct replacement part for the ForgeFit 2" Full Port Ball Valve.

Read more less

Use this barbed fitting to connect 1/2" ID tubing to a 3" tri-clamp fitting. Works seamlessly with the BrewBuilt X3 Conical's 3" butterfly valve bottom port. Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. 3" tri-clamp 1/2" OD barb Made from 304 stainless steel

Read more less

This rebuild kit includes a 3.5" T.C. Gasket and 3mm x 77mm O-ring to aid in the repair of the ForgeFit 2" T.C. Ball Valve. The 3.5" T.C. Gasket requires a food grade grease for assembly with the FF190 Ball Valve.

Read more less

This elbow fitting features 3" tri-clamp connections at both ends and is made from high-quality stainless steel. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port for routing yeast and trub dumps. 3" tri-clamp 90° bend Made from 304 stainless steel

Read more less

This stainless steel tri-clamp features two hinges and folds into three pieces. Some brewers find this style of clamp easier to work with on large equipment that requires a 4" clamp. KegLand Part Number: KL32902

Read more less

Teflon gasket with 304 stainless mesh screen for 4" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28394

Read more less

Teflon gasket with 304 stainless mesh screen for 3" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28868

Read more less

This 2" tri-clamp ball valve is full port and completely disassembles for easy sanitation. It is perfect for inserting a mixer into a wine tank or for mixing hops in a beer tank. No tools are required for disassembly. Simply turn the valve to the closed position, remove the 3.5" tri-clamp, remove the bottom thumb screw (drain), and tilt the ball out of the socket by rotating the top towards you. Reassemble in reverse order. Use food safe grease on all surfaces. Note: Take care to not allow fermentation inside the valve. Do not open the valve during fermentation. The drain screw can be removed while the valve is closed to drain the valve. 2" tri-clamp 3.5" T.C. assembly Made from 304 stainless steel

Read more less

Replacement reservoir for 1.5" tri-clamp spunding valve. Compatible with both 1 BAR BrewBuilt model (CON4P36) and 2 BAR MB model (CON4P35-MB).

Read more less

This sight glass lens is suitable for use with any 3" tri-clamp ferrule with a 3" clamp and gasket. Made of Polyphenylsulfone (PPSU) which offers the clarity of transparency of glass with a much higher shatter and heat resistance. This is a direct replacement part for the Pro Sight Glass Distillation Lid. PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant, and with the added benefit of being see-through. KegLand Part Number: KL22071

Read more less

This sight glass lens is suitable for use with any 2" tri-clamp ferrule with a 2" clamp and gasket. Made of Polyphenylsulfone (PPSU) which offers the clarity of transparency of glass with a much higher shatter and heat resistance. PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant, and with the added benefit of being see-through. KegLand Part Number: KL25973

Read more less

304-type stainless steel tri-clamp 45° elbow with 1.5" clamp ends.

Read more less

Replacement sealing O-ring for 1.5" stainless tri-clamp spunding valves. Single ring. Made from EPDM. Compatible with the BrewBuilt® and MB® tri-clamp spunding valves.  

Read more less

Ferment under pressure with precisely tuned pressure settings Pressure fermentations help to suppress unwanted esters Make clean lagers faster and at higher temperatures Easy-to-read etched pressure scale from 15 to 30 psi Hand adjustable—turn clockwise or counterclockwise to raise or lower your setting Made from 304 stainless steel with polycarbonate cylinder MB is a brand dedicated to crafting and sourcing high-quality, professional-level brewing supplies The MB T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with any pressurizable stainless steel conical with 1.5" T.C. top ports. For larger units, the spunding valve can also be integrated into the blowoff pipework and used with a pressure gauge and tri-clamp tee. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 15-30 psi Made from 304 stainless steel 11.75" H x 4" Ø For Your Safety: Never exceed the maximum rater working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

Read more less