Stainless Steel Wine Tanks

Purpose built for high-quality, small-lot, red wine fermentation Tippable tank allows you to ferment, pump out the juice through the embedded filter screen, and dump remaining skins into your press Manway includes a perforated screen for removing free run Forklift channels allow for easy transportation of the tank around your facility Laser-welded full coverage jacket for cooling or heating Optional Variable Volume Lid Kit available for special order Designed by Speidel and MoreWine! Pro specifically for high-quality, small-lot, red wine fermentation. Modeled after stainless fermentation tanks used in Napa, Sonoma, the North Coast, and elsewhere throughout California but with specific upgrades that set this tank apart. These are tippable tanks which allow you ferment, pump out the juice through the embedded filter screen, and dump remaining skins into your press. The built in, full-coverage cooling jacket allows for temperature control which is critical for making the very best reds. An optional variable volume lid allows you to use the tanks for storage after fermentation and can also make extended maceration far more safe. Quality All the famous quality features German made Speidel tanks are famous for. The 2R finish is the best in the industry and can be cleaned quickly with cold water, saving valuable time during harvest. Amazing weld seams eliminate pockets for bacteria to hide. Speidel only uses the highest quality stainless steel and offers a 25-year warranty on all tanks. The marbled outside does not show dirt or smears, always looks good and is visually impressive. Built-In Screen for Free Run Pump Out The manway has a removable screen on the backside. This allows you to connect to the tri-clamp fitting welded into the manway and pump out all the free run juice before dumping in the press. Alternatively, if you are not going to tip the tank, the manway is still handy for easily removing skins. The internal perforated screen is discretely mounted on the inside of the manway, allowing it to be out of the way during punch downs. When you swing the door open after the tank is empty, the screen is easily removed for cleaning. Cooling The full coverage cooling jacket allows you to control fermentation temperature for long contact, controlled fermentations. Alternatively in cold environments the jacket allows you to heat. Useful after Harvest With the built in cooling jacket and an optional variable volume lid, this tank to be used for wine storage after the harvest. This enables the tank to be utilized year round whereas some wineries use their fermentation tanks only during crush season and never again through the rest of the year. Features Stainless forklift Channels 140 x 80 Mash door Perforated screen for removing free run Sampling port Reinforced racking outlet Thermometer Laser-welded full coverage jacket holds pressure to 6 bar / 87psi Speidel IIId (2R) famous 304 stainless interior finish Marbled outside always looks good Flared strengthening rim on top, width of rim approx. 42 mm Optional Variable Volume Lid Kit available for special order Features Stainless forklift Channels 140 x 80 Mash door Perforated screen for removing free run Sampling port Reinforced racking outlet Thermometer Laser-welded full coverage jacket holds pressure to 6 bar / 87psi Speidel IIId (2R) famous 304 stainless interior finish Marbled outside always looks good Flared strengthening rim on top, width of rim approx. 42 mm Specs 2500L / 660 Gallons Must Capacity at 75% = 495 Gallons or approximately 3 tons of crushed fruit 55" Diameter x 75" Height (1400mm x 1900mm)

Read more less

Purpose built for high-quality, small-lot, red wine fermentation Tippable tank allows you to ferment, pump out the juice through the embedded filter screen, and dump remaining skins into your press Manway includes a perforated screen for removing free run Forklift channels allow for easy transportation of the tank around your facility Laser-welded full coverage jacket for cooling or heating Optional Variable Volume Lid Kit available for special order Designed by Speidel and MoreWine! Pro specifically for high-quality, small-lot, red wine fermentation. Modeled after stainless fermentation tanks used in Napa, Sonoma, the North Coast, and elsewhere throughout California but with specific upgrades that set this tank apart. These are tippable tanks which allow you ferment, pump out the juice through the embedded filter screen, and dump remaining skins into your press. The built in, full-coverage cooling jacket allows for temperature control which is critical for making the very best reds. An optional variable volume lid allows you to use the tanks for storage after fermentation and can also make extended maceration far more safe. Quality All the famous quality features German made Speidel tanks are famous for. The 2R finish is the best in the industry and can be cleaned quickly with cold water, saving valuable time during harvest. Amazing weld seams eliminate pockets for bacteria to hide. Speidel only uses the highest quality stainless steel and offers a 25-year warranty on all tanks. The marbled outside does not show dirt or smears, always looks good and is visually impressive. Built-In Screen for Free Run Pump Out The manway has a removable screen on the backside. This allows you to connect to the tri-clamp fitting welded into the manway and pump out all the free run juice before dumping in the press. Alternatively, if you are not going to tip the tank, the manway is still handy for easily removing skins. The internal perforated screen is discretely mounted on the inside of the manway, allowing it to be out of the way during punch downs. When you swing the door open after the tank is empty, the screen is easily removed for cleaning. Cooling The full coverage cooling jacket allows you to control fermentation temperature for long contact, controlled fermentations. Alternatively in cold environments the jacket allows you to heat. Useful after Harvest With the built in cooling jacket and an optional variable volume lid, this tank can be used for wine storage after the harvest. This enables the tank to be utilized year round whereas some wineries use their fermentation tanks only during crush season and never again through the rest of the year. Features Stainless forklift Channels 140 x 80 Mash door Perforated screen for removing free run Sampling port Reinforced racking outlet Thermometer Laser-welded full coverage jacket holds pressure to 6 bar / 87psi Speidel IIId (2R) famous 304 stainless interior finish Marbled outside always looks good Flared strengthening rim on top, width of rim approx. 42 mm Optional Variable Volume Lid Kit available for special order Specs 1600L / 422 Gallons Must Capacity at 75% = 316 Gallons or approximately 2 tons of crushed fruit 47in diameter x 65in height (1200mm x 1653mm)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1600 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or Thermometer and Thermowell not included) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 2200 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or Thermometer and Thermowell not included) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 240 L (63.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 100 L (26.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 440mm D x 1141mm H (17.3" D x 45" H)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 3850 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or Thermometer and Thermowell not included) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less