Stainless Steel Wine Tanks

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 1.5"TC racking (reinforced), and total drainage TC ports. 2" TC venting port. Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 1.5"TC racking (reinforced), and total drainage TC ports. 2" TC venting port.  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 2" TC venting, racking (reinforced), and total drainage TC ports Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 2"TC venting, racking (reinforced), and total drainage TC ports  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 2"TC venting, racking (reinforced), and total drainage TC ports  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 1.5"TC venting, racking (reinforced), and total drainage TC ports Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 1.5"TC venting, racking (reinforced), and total drainage TC ports  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 1.5" TC venting, racking (reinforced), and total drainage TC ports  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 2" TC venting, racking (reinforced), and total drainage TC ports  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

Speidel's RS-MO and RA-MO Rectangular Tanks are a sister line to their FS-MO & AS-MO flagship storage and fermentation tanks, and can be arranged more closely together to get the most our of your limited floor space. Featuring a huge range of tank capacities, these tanks can be customized with a wide array of add-on features, and can be stacked to take advantage of vertical space in your facility. The RS-MO tank is the tank used for the base, and up to two RA-MO tanks stack on. Please note that with each width range there is a maximum total volume for all tanks in a stack shown below, due to the weight of the tanks when full. Key Features Tank walls and base in AISI304 stainless, tank top is AISI316 stainless for additional SO2 gas resistance All coners and junctions are gently rounded to facilitate draining and prevent wine build-up Base tanks from 200cm and up in height, and all stacking tanks, include a ladder support bow. TC Ferrule on tank top for affixing a valve, bung or blowoff tube. TC racking port is strong enough to support a tank mixer. TC pocketed tank base drains completely The MS-MO Multi-Chamber Tank from Speidel represents an unparallelled degree of freedom when it comes to wine storage. Starting with almost any FS-MO or RS-MO tank of your choosing, you can elect to have your tank divided into up to 3 discrete chambers, so long as each chamber is of at least the stated minimum volume for your tank diameter. Each "sub-tank" is equipped with a venting, racking, and drainage port, as well as an oval racking door. Highly versatile, allowing you to take advantage of high ceilings, and particularly well suited to California wineries which may be nervous about traditional stacking tanks in the face of earthquakes. To determine pricing, start with the cost of your base tank and add the cost of the intermediate floors. As each MS-MO tank is made to order please contact our sales staff for a personal quote or to place an order. MS-MO tanks cannot be ordered via our website. Key Features DIvide one sealed storage tank into up to 3 individual tanks! Tank walls and lowest base in AISI304 stainless steel, intermediate floors and tank top in AISI316 Each tank chamber is equipped with 2"TC venting, racking (reinforced), and total drainage TC ports  Each chamber features a weld-free, molded oval racking door/manway Each chamber is equipped with a DN10 threaded gland to accommodate a sample valve Each chamber is equipped with a DN10 threaded gland and mounting points to affix a sight gauge at any point in the future All tanks over 200cm in total height include a ladder support bow. To determine pricing: Select the tank you wish to divide from our listing of FS-MO or RS-MO tanks. Find the diameter of your starting tank in the table below. Take note of the minimum chamber size for your tank diameter/dimensions, and the cost per intermediate floor being installed. Dividing a tank into two chambers? The price is the cost of the starting tank, plus the cost of 1 intermediate floor.   Tank Diameter/Width Minimum Chamber Volume 100 cm D 650 Liters 120 cm D 900 Liters 140 cm D 1200 Liters 160 cm D 1550 Liters 180 cm D 1900 Liters 200 cm D 2350 Liters 90 cm W 850 Liters 110 cm W 1250 Liters 130 cm W 1650 Liters 140 cm W 1450 Liters 150 cm W 2200 Liters   Click Here for more information on the key features of all Speidel Tanks.

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with many of the standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Forkliftable base with 4-side access Tank is equipped with rectangular manway for must discharge. Equipped with 1.5" TC racking and drainage ports. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. Includes lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with many of the standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Forkliftable base with 4-side access Tank is equipped with rectangular manway for must discharge. Equipped with 1.5" TC racking and drainage ports. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. Includes lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less