Temperature Control

A CoolBot allows a standard air conditioner to cool a room or space down to 35 degrees F.  Installs with no tools or electrical knowledge required.   Standard A/C units available from any hardware or appliance store have lots of power but they are electronically limited so that they cannot go below 60 degrees F.  This is because they would freeze up. Commercial refrigeration for walk in coolers combat freeze with increased surface area on the fins as well as fans. Instead the Cool bot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60F and not freeze up.  The Coolbot cannot give you 100% of the btus listed on your air conditioner nor is suitable for large brewery or winery walk ins. It is perfect for wine cellars, beer storage, fermentation, etc.  Easy to install within 30 minutes with no tools or electrical knowleged required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google Coolbot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service.   This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running.  Residential A/C units are made for efficiency. The Coolbot will also shut down the compressor for short time when the unit is running at its highest level of inneficiency, as it nears freeze up.   Dims of the CoolBot are 6.5x3.5x1.5 in.    Product Introduction   DIY Indoor Cooler   Mobile Walk In Cooler   For the WiFi-enabled model, see the CoolBot Pro.  

Read more less

The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home wine making. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control.  Aside from wine making uses, this is a great dual relay output temperature controller for cooking (use in a smoker or bbq), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in

Read more less

The Temperature Tamer hangs from the side of a bin or tank and has a built-in temperature controller that monitors the temperature and controls a solenoid valve, allowing coolant or heated water to enter a snake, plate or jacket to maintain your ideal temperature. Theoretically you could be maintaining the temperature of a red wine ferment at 77F in one tank while you cold stabilized a white wine at 30F in the next. The built-in Ranco controller allows for heating or cooling, has a temperature range of -30 to 220F, and will maintain the temperature in a ferment or tank within one degree of your set point. The controller opens and closes the built in electronic solenoid valve to start or stop the flow of coolant. The included thermal sensor can be placed into a thermowell mounted onto a tank or a floating thermowell used with a Macrobin. The unit comes equipped with 1/2" barb outlets for the glycol system, however you can remove those and attach anything you'd like to the 1/2" FPT behind them. We generally like to use Quick Disconnects in these systems, please contact us if you need assistance setting this up properly. An example set-up for cooling macro bins: Using one of our glycol systems run an outgoing and incoming loop of 1/2" line that is always recirculating cold glycol. Wherever you have a bin that needs cooling, tee your Temperature Tamer input into the line coming from your chiller, connect a hose from the Tamer's outlet to the inlet side of your cooling plate, and tee a hose from the cooling plate's outlet into the return line going back to the chiller.

Read more less

The BrewBuilt Chilling Pump Kit includes everything you need to push glycol or ice water through your chilling coil or jacketed tank. It includes an Inkbird temperature controller to make it easy to hold your temps. Available with either a 800 or 1300 GPH submersible pump. In general we recommend the 800 GPH pump for use with any batch size fermentation less than 10 gallons, and the 1300 GPH pump for any batch size fermentation between 10 gallons and 2 bbl. Kit Includes: Submersible Pump (PMP601 or PMP602) Inkbird Dual Stage Digital Temperature Controller (FE640) 2x 5 ft. lengths of 3/8" SiliconeTubing (H983) 4x Butterfly Hose Clamps Stainless 3/8" Barb x 1/2" MPT

Read more less

The CoolBot Pro brings you all the great features of the standard CoolBot with added WiFi connectivity, allowing you to monitor and control your cold room from your smartphone through the free mobile app. The CoolBot Pro enables a standard air conditioner to cool a room or space down to 34°F. Easily installs with no tools or electrical knowledge required. The CoolBot Pro comes paired with the Jumper WiFi relay module, which installs on the outside of your cold room. Once the jumper is connected to your wireless network, you can use the free mobile app to control your CoolBot from virtually anywhere with a WiFi connection. Monitor your cold room remotely, adjust temperatures on the fly, or program the app to send you notifications if something is amiss. Whether you're on the go during a busy work week or taking some well-earned R&R, CoolBot Pro has your back! Standard A/C units available from any hardware or appliance store have lots of power, but they are electronically restricted to not go below 60°F.  This is because they would freeze up. Commercial refrigeration for walk-in coolers combat freeze with increased surface area on the fins and fans. Instead the CoolBot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60°F and not freeze up.  The CoolBot cannot give you 100% of the BTUs listed on your air conditioner, nor is suitable for large brewery or winery walk-ins. But it is perfect for wine cellars, beer storage, fermentation, and many other applications.  Easy to install within 30 minutes with no tools or electrical knowledge required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google CoolBot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service.   This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running.  Residential A/C units are made for efficiency. The CoolBot Pro will also shut down the compressor for a short time when the unit is running at its highest level of inefficiency, as it nears freeze up.   Features: Trusted CoolBot technology now with WiFi connectivity and mobile app Allows a standard window air conditioner to cool a room to 34°F Interactive refrigeration for Brewing, Winemaking, Restaurants, Agricultural Purposes & More Mobile app: remote temperature reading and adjustments, receive critical alerts, data storage and reporting Cool Bot Pro and Jumper WiFi relay module included Free mobile app features require WiFi connection Made in the USA Controller Dimensions: 6.5" x 3.4" x 1.1" Jumper Dimensions: 4" x 3.6" x 1.1" Please note: the instruction manual references a paid subscription for the mobile app. The mobile app is now offered for free, with no subscription required.  

Read more less

Certified Food-Grade Propylene Glycol Inhibited Coolant 100% Concentrate for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. NSF Certified, food-grade inhibited propylene glycol fluid which is intended for use in antifreeze and heat transfer applications where contact with food may occur, such as wineries, micro-breweries, meatpackers, and other food-related industries.  Formulated with propylene glycol and an inhibitor system which is effective at preventing rust and corrosion in aluminum, brass, cast iron, copper, solder and steel-containing systems.  Operating Range: -50°F to 325°F (-46°C to 163°C) Application: HVAC system freeze/burst/corrosion protection Immersion freezing Cooling liquid foods Packaging carbonated beverages Fermentation cooling Refrigeration coil defrosting Cold room dehumidifying Conveyor roller defrosting Process cooling Process heating Waste heat recovery PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. Always test your heat exchangers with water to check for pinhole leaks. In case of consumption please contact your local Poison Control Center immediately.  

Read more less

The ITC-308 WiFi controller allows you to monitor your fermentation temperature from virtually anywhere with an internet connection. From the free companion app, available for iOS and Android devices, you can adjust settings, receive push notifications, and track daily activity. Please note the controller will only work with 2.4 GHz WiFi routers. The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing and wine making. Control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from fermentation uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: WiFi Enabled - requires 2.4 GHz router Free companion app available for iOS and Android devices Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in Power Cord - 4.5 ft. Temp Probe Cord - 6 ft.  

Read more less

The Johnson digital temperature controller is used to control the temperature of a refrigerator, or similar cooling or heating device. Enter your desired temperature, called set point, and how tightly you want your temperature maintained, called differential, and let the controller do the rest. This is a high quality, ready to go temperature controller that is accurate and easy to use.

Read more less

This carboy thermowell is used in conjunction with a Digital Controller to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5, 6, or 6.5 gallon glass carboys or any other similarly sized opening hole. The unit comes with a 15" stainless steel thermowell and a #6.5 stopper. The stopper has two holes measuring 3/8" and 1/4". Measures 14" from the bottom of the stopper to the end of the thermowell. Will not work with Johnson Temperature Controllers (FE600 or FE609) because the probes are too large.

Read more less

Use this analog unit to control the temperature of a refrigerator, freezer, or air conditioner. It enables you to ferment and store wine at correct temperatures when the ambient room temperature is too warm. Your electrical cooling device plugs into this unit which plugs into the outlet. A remote sensor connected by a small capillary tube monitors temperatures. If the temperature rises above your set point, the cooling device is turned on. The unit features a 4 degree swing to help extend the life of the cooling unit's compressor. For example, if you had it set at 68 degrees, it would turn on at 68 degrees and go to 64 degrees before turning off. The unit has the potential to regulate temperature from 20 to 80 degrees Fahrenheit. The sensor tube can be inserted into a refrigerator or freezer, and still allows the door gasket to seal tight. Temperature Range of 20 to 80F. It will handle 15 amps or 1725 watts at 115 volts AC.

Read more less

Compact chiller with commercial level cooling power Maintain fermentation temperatures, cold-stabilize insulated tanks, or maintain storage temperatures Position inside the winery or outside in a covered position Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Made in Germany by Kreyer This Chilly45 unit allows you to easily cool your ferment temperatures, cold-stabilize smaller insulated tanks, or maintain a wine tank storage temperature. This unit can be used inside the winery or placed in a covered position on the outside of the winery. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Ready to go - fill with water or a water/glycol solution and plug in. They are equipped with an efficient scroll-type compressor. Note: This unit runs off 220V single phase power. It will not run off 208V. Uses Cooling of must for cold soaks, slow starting ferments Stabilization of tataric crystals Controlling fermenting temperatures Maintaining storage temperatures in tanks/barrels (ask about our barrel snake!) Features Sheet metal housing, electrolitic galvanized high surface quality, powder-coated and abrasion-resistant encasing cover that is easily detachable 220v single phase 60Hz 14 amp supply voltage 1.28 tons (15,000 btu) of cooling power 30L/8G Insulated Plastic tank to hold water or glycol Easy to fill from outside Centrifugal recirculation pump made by Speck. Digital Thermostat Integrated pump pressure switch allows unit to work with digital automatic temperature controlers on multiple tanks. NEW Micro Channel evaporator is quieter, more efficient and uses 30% less cooling gas. High Tech, Scroll-type, efficient, low noise compressor Environmentally friendly R404A refrigerant is optimized to work in low temperature ranges Non-Ferrous water circuit - No Rusting! Outlet is 3/4" MPT, which accomodates hose fittings with gaskets, and includes a 1/2" barb fitting 29.75" Length 23.6" Width 19.68" Height All units pass multiple tests prior to shipment 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Need a small glycol system designed for your needs? Contact Morebeer! Pro at info@morebeerpro.com or MoreWine! Pro at info@morewinepro.com

Read more less

The IceMaster is designed to cool fermentations in small vessels or barrels. It can be used with any vessel/fermenter/tank/barrel that has a glycol jacket or submersed cooling snake/coil/rod. For each vessel you want to cool you will need to buy one of our BrewBuilt Chilling Pump Kit (GLY355).  Each Chilling Pump Kit includes a submersible pump that is placed in the cool bath of the IceMaster chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature.  Compatibility The IceMaster can be used with any fermenter that has a built in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following: Speidel - Speidel tanks with optional cooling jackets. You will need one Glycol Pump Kit for each tank.    Barrels - If you use our barrel snake. This can be particularly attractive for a white wine ferment in a barrel. You will need one Glycol Pump Kit for each fermenter. Coolstix - Any glass or PET carboy, Fermonster, or other small vessel that is using a Coolstix to maintain temperatures.   Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, how the tank is insulated, and what the ambient temperature is. Cold stabilizing always requires the most energy and requires well insulated tanks. We are currently experimenting with capacities but can provide this rough guide to get you started. The maximum number of tanks that can be cooled with the IceMaster is four.   1 - 60 Gallon Tank or Barrel 2 - 15-30 Gallon Tanks 4 - 5 to 15 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 4 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to IceMaster reservoir (should drain freely, no connection necessary) Specifications: Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: r134a Voltage: 110V (3.6 amps) Dimensions: 410mm x 410mm x 660mm Includes 10 stainless bulkheads with 3/8" OD Barbs Wheels included CE Certified Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.    

Read more less

Glycol power packs for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. Features 2300 btu Digital Thermostat Max distance of glycol "out" line - 125 Feet. Vane (Procon) with 1/3 HP Motor 115V Power 11.5 gallon bath capacity Dimensions: 27-1/2"H x 18"W x 29"D Weight: 120 pounds

Read more less

This is a replacement wire and thermistor for Ranco controllers. It is 8ft in long and is water resistant but not waterproof. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F.  

Read more less

The MKII temperature controller is a great way to control the temperature of your fermentation. Control both heating and cooling with two plugs on the back and create a temperature profile to step up or down the temperature over time. That ability to program in steps can be handy for wine fermentation or even storage if you want to lower or raise slowly.  Features: 0.1 degree accuracy Dual plugs for simultaneous heating & cooling -49°F to 248°F temperature range Fully waterproof temperature probe Programmable temperature profiles Kegland Part number: KL01946

Read more less

Glycol Chillers for cooling wine fermentations and for use with our PH45 fan unit for cooling rooms. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. If you desire to do cold stabilization with this small chiller you will need to insulate your tanks very well and have sufficient cooling surface area in contact with the wine. A better machine for cold stabilization is our Chilly45 made by Kreyer, featuring 4x the power. Features of Glycol System #1 Digital Thermostat Digital Temperature Controller 2,300 btu/hr Compressor 1/3 hp Vertical-type pump 115V power 5 gallon bath capacity max distance of glycol line is 75 feet 22-1/4" H x 17-3/8" W x 26" D 118 pounds Will cool glycol bath down to approximately 20°F  

Read more less

Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 1.8 Ton / 21,840 Btu cooling capacity 230V, 3 Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V 3 phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 1.8 Tons (21,840btu) of cooling power .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230V 60Hz 3 phase supply voltage drawing 13.1 amps Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note:  This unit REQUIRES 230 v Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes.  For additional product options click here.

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 5 tons (60,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* Outdoor rated – install the unit outside your facility if desired 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI 230 v 1 phase power (MCA 40.8) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note:  This unit REQUIRES 230 v Single Phase power (MCA 40.8) and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.  

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 2 tons (24,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* Outdoor rated – install the unit outside your facility if desired 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM @ 30 PSI 230 v Single Phase power (MCA 21.3) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 42"x32.5"x51.5" 350 lb UL Certified Please Note:  This unit REQUIRES 230 v Single Phase power (MCA 21.3) and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.

Read more less

This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time. The color screen clearly displays temperature, graph of future and past temperature settings and makes it much easier to perform profile temperature steps. The RAPT app can be downloaded from the Apple App Store for iPhone or Google Play for Android, or you can access the RAPT portal from any web browser here. This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. For untethered probe readings, switch the temp reference to the RAPT Bluetooth Thermometer. PID Included This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation. Temperature Range The temperature range of this device will enable you to control devices from -4°F to 248°F (-20°C to 120°C).  Various Mounting Options This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brew system. Simply unscrew the mounting plate and switch the mounting to your preferred orientation. RAPT WiFi Compatible This product will connect with the RAPT portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running. Specs: WiFi & Bluetooth Enabled Free companion app available for iOS or Android devices Customize temp profiles and view logged data from the RAPT portal via web browser Simple plug and play design with LCD display Adjustable heating/cooling differentials Temp Range: -4–248°F (-20–120°C). Probe Relay Length: 6.5 ft. (2 m) Probe Diameter: 0.15" (4 mm) 110-120V 15A KegLand Part Number: KL26055  

Read more less

Control the humidity of your cellar to prevent wine barrels from drying out Dry, non-humidified barrels will draw liquid to the outer surface where it evaporates, leading to significant product loss Can operate in environments as low as 34°F, making it ideal for cold rooms and storage halls Compact, stand-alone unit can be suspended from or mounted to a wall 2,800 cubic feet per hour air flow Made in Germany by Kreyer Humidity control in wine cellars plays a major role during the production, maturation and storage of wine and other beverages in wooden barrels. Wine barrels safe-guard the main asset of a winery – the wine itself. The wooden walls of dry, non-humidified barrels will draw liquid from inside it up through the small crevices to the outer surface where it evaporates. Over time, this leads to a significant amount of product loss. For example, a 225L wine barrel can lose 10-15% of the wine volume over one year. A professional humidification of the barrel room allows the barrel wood to absorb water-vapor, the crevices fill out and loss of wine is prevented. A well-kept barrel room is therefore cool, usually around 57-60°F and humidified at about 75% - 80% rH. As with every aspect of winemaking, attention and professional equipment are required. Low humidification may allow the wood to dehydrate and wine will evaporate through it, while overly high humidity can lead to mold and fungus.    The centrifugal humidifier HumiFix is equipped with a spinning disk that vaporizes water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling a room at the same time. The unit can work either connected to your main water supply with inline cartridge filtration or more ideally to an RO unit. The HumiFix can work at low temperatures (down to 34°F), which is ideal for installation in cold rooms and storage halls.   Features: Stand-alone unit Easy installation and handling Compact construction Wall or suspended mounting Specifications: Water Output: 1.0 L/h (0.26 Gal/h) Air Flow: 80 m³/h Power: 31 watts Power Connection: 110V/1Ph/60Hz Dimensions: 15.5" L x 12" W x 15.5" H Empty Weight: 10 lbs Please note: this unit comes with a bare cord so it can be hard wired to a controller. Otherwise we recommend attaching a 110V male plug and using it with the Inkbird Digital Humidity Controller.  

Read more less

Control the humidity of your cellar to prevent wine barrels from drying out Dry, non-humidified barrels will draw liquid to the outer surface where it evaporates, leading to significant product loss Can operate in environments as low as 34°F, making it ideal for cold rooms and storage halls Compact, stand-alone unit can be suspended from or mounted to a wall 9,900 cubic feet per hour air flow Made in Germany by Kreyer Humidity control in wine cellars plays a major role during the production, maturation and storage of wine and other beverages in wooden barrels. Wine barrels safe-guard the main asset of a winery – the wine itself. The wooden walls of dry, non-humidified barrels will draw liquid from inside it up through the small crevices to the outer surface where it evaporates. Over time, this leads to a significant amount of product loss. For example, a 225L wine barrel can lose 10-15% of the wine volume over one year. A professional humidification of the barrel room allows the barrel wood to absorb water-vapor, the crevices fill out and loss of wine is prevented. A well-kept barrel room is therefore cool, usually around 57-60°F and humidified at about 75% - 80% rH. As with every aspect of winemaking, attention and professional equipment are required. Low humidification may allow the wood to dehydrate and wine will evaporate through it, while overly high humidity can lead to mold and fungus.    The centrifugal humidifier HumiFix is equipped with a spinning disk that vaporizes water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling a room at the same time. The unit can work either connected to your main water supply with inline cartridge filtration or more ideally to an RO unit. The HumiFix can work at low temperatures (down to 34°F), which is ideal for installation in cold rooms and storage halls.   Features: Stand-alone unit Easy installation and handling Compact construction Wall or suspended mounting Specifications: Water Output: 6.5 L/h (1.69 Gal/h) Air Flow: 280 m³/h Power: 230 watts Power Connection: 110V/1Ph/60Hz Dimensions: 24" L x 20" W x 22.25" H Empty Weight: 40 lbs Please note: this unit comes with a bare cord so it can be hard wired to a controller. Otherwise we recommend attaching a 110V male plug and using it with the Inkbird Digital Humidity Controller.  

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 5 tons (60,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* Outdoor rated – install the unit outside your facility if desired 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI 230 v 3 phase power Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note:  This unit REQUIRES 230 v Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.  

Read more less

Use this Solenoid valve to control glycol flow into a fan unit.  These Solenoids should be combined with a Fan Temperature Controller and Connection Cable to set a specific temperature for your fan unit to achieve in your room.  We recommend purchasing a Solenoid Filter with this valve.  The filter will insure that no small particulates can get caught in the valve assembly, potentially damaging the unit. 230 v AC Solenoid with 1" FPT We also sell complete control kits for Kreyer fan units: MR75 & MR135 Control Kit MR210 Control Kit SD35L & SD73L Control Kit

Read more less