Thermometers & Temperature Controllers

Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 2" 304 s/s housing, a hermetically sealed water proof case, and glass face. The range is 0-220 °F and -10-100 °C. The 12" stem is 1/8" stainless steel. This is a very different thermometer than some of the other low quality 2" x 12" thermometers that are currently on the market. This dial thermometer should be calibrated at 150 °F.     

Read more less

A CoolBot allows a standard air conditioner to cool a room or space down to 35 degrees F.  Installs with no tools or electrical knowledge required.   Standard A/C units available from any hardware or appliance store have lots of power but they are electronically limited so that they cannot go below 60 degrees F.  This is because they would freeze up. Commercial refrigeration for walk in coolers combat freeze with increased surface area on the fins as well as fans. Instead the Cool bot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60F and not freeze up.  The Coolbot cannot give you 100% of the btus listed on your air conditioner nor is suitable for large brewery or winery walk ins. It is perfect for wine cellars, beer storage, fermentation, etc.  Easy to install within 30 minutes with no tools or electrical knowleged required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google Coolbot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service.   This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running.  Residential A/C units are made for efficiency. The Coolbot will also shut down the compressor for short time when the unit is running at its highest level of inneficiency, as it nears freeze up.   Dims of the CoolBot are 6.5x3.5x1.5 in.    Product Introduction   DIY Indoor Cooler   Mobile Walk In Cooler   For the WiFi-enabled model, see the CoolBot Pro.  

Read more less

The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home wine making. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control.  Aside from wine making uses, this is a great dual relay output temperature controller for cooking (use in a smoker or bbq), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in

Read more less

The Temperature Tamer hangs from the side of a bin or tank and has a built-in temperature controller that monitors the temperature and controls a solenoid valve, allowing coolant or heated water to enter a snake, plate or jacket to maintain your ideal temperature. Theoretically you could be maintaining the temperature of a red wine ferment at 77F in one tank while you cold stabilized a white wine at 30F in the next. The built-in Ranco controller allows for heating or cooling, has a temperature range of -30 to 220F, and will maintain the temperature in a ferment or tank within one degree of your set point. The controller opens and closes the built in electronic solenoid valve to start or stop the flow of coolant. The included thermal sensor can be placed into a thermowell mounted onto a tank or a floating thermowell used with a Macrobin. The unit comes equipped with 1/2" barb outlets for the glycol system, however you can remove those and attach anything you'd like to the 1/2" FPT behind them. We generally like to use Quick Disconnects in these systems, please contact us if you need assistance setting this up properly. An example set-up for cooling macro bins: Using one of our glycol systems run an outgoing and incoming loop of 1/2" line that is always recirculating cold glycol. Wherever you have a bin that needs cooling, tee your Temperature Tamer input into the line coming from your chiller, connect a hose from the Tamer's outlet to the inlet side of your cooling plate, and tee a hose from the cooling plate's outlet into the return line going back to the chiller.

Read more less

The CoolBot Pro brings you all the great features of the standard CoolBot with added WiFi connectivity, allowing you to monitor and control your cold room from your smartphone through the free mobile app. The CoolBot Pro enables a standard air conditioner to cool a room or space down to 34°F. Easily installs with no tools or electrical knowledge required. The CoolBot Pro comes paired with the Jumper WiFi relay module, which installs on the outside of your cold room. Once the jumper is connected to your wireless network, you can use the free mobile app to control your CoolBot from virtually anywhere with a WiFi connection. Monitor your cold room remotely, adjust temperatures on the fly, or program the app to send you notifications if something is amiss. Whether you're on the go during a busy work week or taking some well-earned R&R, CoolBot Pro has your back! Standard A/C units available from any hardware or appliance store have lots of power, but they are electronically restricted to not go below 60°F.  This is because they would freeze up. Commercial refrigeration for walk-in coolers combat freeze with increased surface area on the fins and fans. Instead the CoolBot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60°F and not freeze up.  The CoolBot cannot give you 100% of the BTUs listed on your air conditioner, nor is suitable for large brewery or winery walk-ins. But it is perfect for wine cellars, beer storage, fermentation, and many other applications.  Easy to install within 30 minutes with no tools or electrical knowledge required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google CoolBot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service.   This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running.  Residential A/C units are made for efficiency. The CoolBot Pro will also shut down the compressor for a short time when the unit is running at its highest level of inefficiency, as it nears freeze up.   Features: Trusted CoolBot technology now with WiFi connectivity and mobile app Allows a standard window air conditioner to cool a room to 34°F Interactive refrigeration for Brewing, Winemaking, Restaurants, Agricultural Purposes & More Mobile app: remote temperature reading and adjustments, receive critical alerts, data storage and reporting Cool Bot Pro and Jumper WiFi relay module included Free mobile app features require WiFi connection Made in the USA Controller Dimensions: 6.5" x 3.4" x 1.1" Jumper Dimensions: 4" x 3.6" x 1.1" Please note: the instruction manual references a paid subscription for the mobile app. The mobile app is now offered for free, with no subscription required.  

Read more less

This stainless steel thermowell is the same one used with many of the hood and stopper thermowells we sell, such as the FE625 and FE624B. It is also a direct replacement for the thermowell used with the BrewBuilt CoolStix™ for Carboy fermenters. Specifications: 15" long 1/4" inner diameter 5/16" outer diameter Made from 304 stainless steel Will not work with Johnson Temperature Controllers (FE600 or FE611) because the probes are too large.

Read more less

This carboy thermowell is used in conjunction with the Digital Controller, FE601A, FE610A, or FE602, to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5 or 6 gallon PLASTIC carboys or any other similarly sized opening hole. The unit comes with a 15" stainless steel thermowell and a #10 silicone stopper that will accommodate our sanitary filter, FIL90, as well. It can be used in any container with a stopper opening of this size where you need to accurately monitor and control liquid temperature. Will not work with Johnson Temperature Controllers (FE600 or FE611) because the probes are too large. Need a thermowell for a glass carboy? Click here. Inner Diameter of Thermowell: .255"  Works with new 2016 Rancos

Read more less

The ITC-308 WiFi controller allows you to monitor your fermentation temperature from virtually anywhere with an internet connection. From the free companion app, available for iOS and Android devices, you can adjust settings, receive push notifications, and track daily activity. Please note the controller will only work with 2.4 GHz WiFi routers. The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing and wine making. Control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from fermentation uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: WiFi Enabled - requires 2.4 GHz router Free companion app available for iOS and Android devices Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in Power Cord - 4.5 ft. Temp Probe Cord - 6 ft.  

Read more less

The Johnson digital temperature controller is used to control the temperature of a refrigerator, or similar cooling or heating device. Enter your desired temperature, called set point, and how tightly you want your temperature maintained, called differential, and let the controller do the rest. This is a high quality, ready to go temperature controller that is accurate and easy to use.

Read more less

1.5" Tri-Clamp end cap welded to thin wall stainless tubing for quick accurate temperature readings. Insert 1/4" thermal probe from controller. Works perfectly with our Ranco digital controllers. Thermowell mounts into 1.5" Tri-Clamp ferrule in the side or your tank. Has a 6 inch probe. Works with new 2016 Rancos

Read more less

Use this analog unit to control the temperature of a refrigerator, freezer, or air conditioner. It enables you to ferment and store wine at correct temperatures when the ambient room temperature is too warm. Your electrical cooling device plugs into this unit which plugs into the outlet. A remote sensor connected by a small capillary tube monitors temperatures. If the temperature rises above your set point, the cooling device is turned on. The unit features a 4 degree swing to help extend the life of the cooling unit's compressor. For example, if you had it set at 68 degrees, it would turn on at 68 degrees and go to 64 degrees before turning off. The unit has the potential to regulate temperature from 20 to 80 degrees Fahrenheit. The sensor tube can be inserted into a refrigerator or freezer, and still allows the door gasket to seal tight. Temperature Range of 20 to 80F. It will handle 15 amps or 1725 watts at 115 volts AC.

Read more less

Designed to work with the Ranco Digital temperature controllers (Johnsons will not fit).  These allow you to control the core temperature of your fermentation instead of the air around the carboy.

Read more less

The BrewBuilt tri-clamp thermometer features a large 3" face for easy reads and 6" probe for deep penetration into your conical fermenter or T.C. kettle. Dial face reads from 0-220°F and -10-100°C. 3" dial face 6" probe 1.5" T.C. Reads in °F and °C

Read more less

This is just the same FE610 controller (ETC-111020-000) without any wiring. For the "Do It Your Self" person or for hard wiring into your application. It comes with a manual and wiring diagram, but you must have electrical knowledge. If you are unsure you are best purchasing the pre-wired FE601 This controller has two sets of contacts the Normally Open contact is rated at:   115 Volts 208/240 Volts Full-Load Amps 16 Amps 8 Amps Locked Rotor Amps 96 Amps 48 Amps Resistive Amps 15 Amps 8 Amps Horsepower 1 hp 1 hp The Normally Closed contact is rated at: 115 Volts 208/240 Volts Full-Load Amps 5.8 Amps 2.9 Amps Locked Rotor Amps 34.8 Amps 17.4 Amps Resistive Amps 5.8 Amps 2.9 Amps Horsepower 1/4 hp 1/4 hp

Read more less

This BrewBuilt thermowell features a 1.5" T.C. connections, 4" long probe, and is compatible with 1/4" diameter temp probes. On a stainless steel conical, this allows you to use a digital temperature controller to maintain fermentation temps. For electric boil kettles and hot liquor tanks, the thermowell allows temperature readings to be sent to a PID controller to control an electric heating element. 1.5" T.C. 4" probe Compatible with 1/4" Ø temp probes Made from 304 stainless steel

Read more less

This is a replacement wire and thermistor for Ranco controllers. It is 8ft in long and is water resistant but not waterproof. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F.  

Read more less

The Anvil temperature controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you’re ready to go. The 9.5 ft long sensor cable reaches anywhere you need. We’ve also selected a robust 15A internal relay for long life and more capacity than the competition. All this at one cool price. Features: 120V 15A operation Control temps to +/- 1F Temperature Control Range: 16 - 220°F Fahrenheit display Selectable heat and cool modes (not dual stage) Plugs into any 120V wall receptacle – no mounting holes needed! Reduced cable clutter Plug can be inverted to match your receptacle 9.5 ft sensor cable length 1.5" sensor probe length  

Read more less

The MKII temperature controller is a great way to control the temperature of your fermentation. Control both heating and cooling with two plugs on the back and create a temperature profile to step up or down the temperature over time. That ability to program in steps can be handy for wine fermentation or even storage if you want to lower or raise slowly.  Features: 0.1 degree accuracy Dual plugs for simultaneous heating & cooling -49°F to 248°F temperature range Fully waterproof temperature probe Programmable temperature profiles Kegland Part number: KL01946

Read more less

Tired of your digital controller laying awkwardly in the way? Now there is a solution - hang it up! Our hanger screws into a vertical surface and allows you to hang the controller. The hanger bracket features two posts that fit the mounting holes that are a part of the Ranco Controller. This allows you to hang the unit when in use and the remove the unit when you want to clean. This can be handy when you are cleaning with water and could potentially get the controllers wet. Use it to hang your controller on a refrigerator, fermenter stand, brew system, or whatever else you have dreamed up. This is a custom piece made by MoreBeer!

Read more less

Replacement Temperature Sensor for Kreyer Chilly 45, Chilly Max, and MCK units.

Read more less

Simple and easy to use probe thermometer with alarm. The cable on this thermometer isn't waterproof so you shouldn't allow the probe to be fully submerged. If this does occur and you are getting incorrect readings you can place the probe in the oven (leaving the plug outside) and bake for 1 hour at 190C to boil the moisture out of the probe. Broad temperature operating range (0 degrees C / 250 degrees C) High accuracy of 1 degree C (0-100C) 1.5 degree C (100-250C) Temperature display resolution 1 degree Timer range 99min 59sec Timer alarm function High temperature alarm function Celsius and Fahrenheit display option Battery operated 1xAAA    

Read more less

Defrost Kits are electric heating elements made of a set of thin metallic heating rods that are fitted into the suitable slots, under the coil of the thermo-fan. This layout simplifies the installation and guarantees homogenous dispersion of heat over the entire coil for even defrosting. The Defrost Kit melts the iced condensate, which accumulates on the airways when the fan is used for room cooling with Glycol-water set below the freezing point. Periodical defrosting enables the use of the thermo-fan for setting up cold-rooms, which are kept at low temperatures. The melted condense water drips to the fan's collection tray for drainage. When using a Defrost Kit, it is required to use the FermFlex-Defrost controller, which controls both the fan-valve for cooling and the heating element for defrosting.

Read more less

Defrost Kits are electric heating elements made of a set of thin metallic heating rods that are fitted into the suitable slots, under the coil of the thermo-fan. This layout simplifies the installation and guarantees homogenous dispersion of heat over the entire coil for even defrosting. The Defrost Kit melts the iced condensate, which accumulates on the airways when the fan is used for room cooling with Glycol-water set below the freezing point. Periodical defrosting enables the use of the thermo-fan for setting up cold-rooms, which are kept at low temperatures. The melted condense water drips to the fan's collection tray for drainage. When using a Defrost Kit, it is required to use the FermFlex-Defrost controller, which controls both the fan-valve for cooling and the heating element for defrosting.

Read more less

This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time. The color screen clearly displays temperature, graph of future and past temperature settings and makes it much easier to perform profile temperature steps. The RAPT app can be downloaded from the Apple App Store for iPhone or Google Play for Android, or you can access the RAPT portal from any web browser here. This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. For untethered probe readings, switch the temp reference to the RAPT Bluetooth Thermometer. PID Included This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation. Temperature Range The temperature range of this device will enable you to control devices from -4°F to 248°F (-20°C to 120°C).  Various Mounting Options This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brew system. Simply unscrew the mounting plate and switch the mounting to your preferred orientation. RAPT WiFi Compatible This product will connect with the RAPT portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running. Specs: WiFi & Bluetooth Enabled Free companion app available for iOS or Android devices Customize temp profiles and view logged data from the RAPT portal via web browser Simple plug and play design with LCD display Adjustable heating/cooling differentials Temp Range: -4–248°F (-20–120°C). Probe Relay Length: 6.5 ft. (2 m) Probe Diameter: 0.15" (4 mm) 110-120V 15A KegLand Part Number: KL26055  

Read more less