Wine Bottle Dressing

VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.

Read more less

Due to high demand, the 50 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks. Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage. DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork. Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.  

Read more less

Safe and easy operation compared to handheld shrink guns Shrink capsules adhere quickly, simply slide the bottle into position then remove immediately Made from stainless steel for longevity and easy cleaning 800W power The safest and most simple solution to applying heat shrink capsules to your wine bottles. The horizontal heat shrinker allows you to keep your hands free and clear of the heating element during operation. Shrinking only takes a moment—simply slide the bottle into position and then quickly remove it. Stainless steel construction for easy cleaning. On/Off switch. 800 Watt / 110V.

Read more less

Spring-loaded hand-lever for quick and easy operation Compatible with bottles from 7" to 14" in height Works with polylam, tin, and aluminum capsules Made in Italy by Marchisio Used to spin tin foils onto bottles, our Vertical Spinner features a guide for perfect bottle placement everytime, making it much faster and easier to use than a comparable Horizontal Spinner. Horizontal Spinners can be difficult to use because you have to center each bottle. The included hand-lever lowers the spinner onto the bottle and then springs back into place when released. The spinner height can be adjusted on the stand to accommodate bottles from 7" to 14" tall. 110 V.   Works with polylam, tin, and aluminum capsules from 28 - 31 mm Ø, up to 65 mm in length. Unit comes unwired for a 110v plug.

Read more less

Due to high demand, the 50 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks. Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage. DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork. Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.  

Read more less

Forced air for fast, consistent results Insulated handle with 3-position switch (off/cooling/use) 1,000W power The La Tecno ST1 Heat Shrink Gun features forced air to evenly apply heat across the surface of the capsule. Hot air is pushed downwards over the shrink capsule and results in more uniform shrinking, faster process, and consistent results. Traditional heat shrink guns with hot coils, but no internal fan for forced air, can cause the capsule to wrinkle as it shrinks. Chrome-plated body with insulated handle and three-position switch for off, cooling, and use. 1,000 Watt / 110V.

Read more less

VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.

Read more less

Do you have issues with your heat shrinker? Do you keep burning the top or sides of the heat shrinks with inexpensive shrinkers? Do you have a terrible "bottleneck" in your packaging line where heat shrinks are applied? If so, our Vertical Heat Shrinker is the solution you've been looking for. Features Faster throughput keeps your bottling line moving Temperature Control and precise bottle placement ensure that the heat shrink is not marred or damaged during application. Stainless Steel Construction Ceramic stone pushes down top of shrinks and can be replaced with your own custom heat stamp 110V 60Hz Power! Does not come with plug

Read more less

This semi-automated compact label applicator machine is suitable for bottles, jars or cans of up to 160mm diameter and is fully adjustable for labelling any cylindrical container. Apply self-adhesive labels to your beer, wine or spirits easily and quickly and automatically. Specifications: Power: 110V 60Hz Min Label Thickness: 5μm (0.005 mm) Max Label Height: 150 mm (5.9") Max Label Length/Width: 300 mm (11.8") Max Label Roll Diameter: 280mm (11.02") Max Label Roll Inside Diameter: 76mm (2.99") Max Vessel Diameter: 160 mm (6.2") Label Applicator Speed: 1–3 seconds (varies by label length) Approx. Dimensions: 21.6" L x 9.8" W x 13.7" H KegLand Part Number: KL18326  

Read more less

A vertical stand with lever operation for Foil Spinners. Did you purchase a benchtop foil spinner only to find it difficult to work with? Do you have a bruise on your hip from supporting bottle after bottle at the end of the day? Are you ruining more foils than you'd like to from mis-feeds? If you answered yes to any of these questions then this is just the product you've been waiting for! Mounting your Foil Spinner vertically makes the application of foils faster, easier and more accurate. Simply adjust the bottle seat to the right length depending on the diameter of your bottle and adjust the spinner height so that when you pull the lever down the rollers completely cover the foil and you're good to go! Our stand should work with most spinners available, but please double check the bolt pattern shown below against the plate on the bottom of your spinner or the footings on the motor. You will need to source your own bolts for attaching to the stand, as the size, pitch and depth of the hole in your motor/mounting plate will vary from manufacturer to manufacturer. Specifications: Made from 304 Stainless Steel Bolt Holes are spaced 90mm W x 110mm H Shaft Height: 900mm *Please Note: The drawing at the right shows the stand with a spinner mounted to it. This SKU is to purchase the stand by itself. If you would like to purchase a vertically mounted complete unit, please see W650 - Upright Foil Spinner.

Read more less

Shaped to fit around a bottle neck to apply even heat from all sides Insulated handle and wire support stand to rest the shrinker between uses 700W power Simple, effective, and easy to use. This manual heat shrink gun uniformly applies heat from all sides to evenly shrink capsules to your wine bottle. Chrome plated steel body with insulated handle and fold out wire stand so you can safely set the shrinker down between uses. 700 Watt / 110V. Example photos show a European style plug. Updated images coming soon.

Read more less

This Thermal Printer Ribbon is a replacement for the ribbon supplied on the Semi-Automatic Label Applicator Machine. ID: 25mm OD: 63mm Ribbon Width: 30mm Ribbon Length: 100m KegLand Part Number: KL20336

Read more less

This semi-automated compact label applicator machine is suitable for bottles, jars or cans of up to 160mm diameter and is fully adjustable for labelling any cylindrical container. Apply self-adhesive labels to your beer, wine or spirits easily and quickly and automatically. Features a date coder for commercial operations that require stamp dates on their product. A more affordable option without the date coder is also available (CAN3100). Specifications: Power: 110V 60Hz Min Label Thickness: 5μm (0.005 mm) Max Label Height: 150 mm (5.9") Max Label Length/Width: 300 mm (11.8") Max Label Roll Diameter: 280mm (11.02") Max Label Roll Inside Diameter: 76mm (2.99") Max Vessel Diameter: 160 mm (6.2") Label Applicator Speed: 1–3 seconds (varies by label length) Approx. Dimensions: 21.6" L x 9.8" W x 13.7" H Data Coder: Fully adjustable position, automatic operation, date code stamps included KegLand Part Number: KL20329

Read more less

Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the exterior of the labeling machine. For the interior roller mount, see here. KegLand Part Number: KL88925

Read more less

Precision Labeling: Achieve consistent and accurate label placement on bottles of various sizes, ensuring professional presentation and brand integrity. Versatile Labeling Capabilities: Easily adjust settings to accommodate different label sizes and shapes, offering flexibility for diverse labeling needs. High-Speed Performance: Experience rapid label application, significantly boosting productivity and minimizing downtime to keep your operations running smoothly. Durable Construction: Built to withstand demanding industrial environments, the MEP ETC240 is crafted with robust materials and reliable components for long-lasting performance. User-Friendly Design: With its intuitive interface and easy operation, the MEP ETC240 simplifies the labeling process, empowering users to streamline operations and maximize efficiency. Introducing the MEP ETC240 Labeling Machine, a cutting-edge solution designed to streamline labeling processes with precision and efficiency. Engineered with advanced technology and user-friendly features, this labeling machine offers unparalleled performance for wineries of all sizes. With its sleek design and intuitive interface, the MEP ETC240 is easy to operate, allowing users to label bottles of various shapes and sizes with ease. Equipped with adjustable settings, the ETC240 accommodates different label sizes and shapes, giving you the flexibility to meet diverse labeling needs. Its high-speed capabilities ensure rapid label application, boosting productivity and minimizing downtime. Thanks to its durable construction and reliable components, this labeling machine is built to withstand demanding industrial environments, ensuring long-lasting performance and maximum uptime. Plus, its compact footprint saves valuable space on your production floor. MEP has been a trusted supplier of commercial equipment to the wine industry for decades. We are proud to be official distribution partners of MEP, having a direct relationship with ownership. This relationship allows us to service you better, be it questions or replacement parts. Features: AISI 304 stainless steel frame Compatible with round & square bottles Diameter of round bottles: up to 112mm (4.41") Side of square bottles: 65-75mm (2.56" - 2.95") Self-sticking labels on a band wound around a bobbin Max Inner Diameter of the bobbin: 65-75mm (2.56" - 2.95") Max Outer Diameter of the bobbin: 200mm (7.87") Max Height of the band: 140mm (5.51") Capable of applying both front and back labels simultaneously It is preferable to use rectangular labels Possibility to use labels which wind round the bottles (only round bottles) Front and back labels must be located on the same band Labeling time is about 3 seconds 110V, 60 Hz Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the interior of the labeling machine. For the exterior roller mount, see here. KegLand Part Number: KL88925

Read more less

Replacement lower support flange for the Marchisio Upright Foil Spinner.  

Read more less

White Thermoseal Hoods. Plastic heat shrink hoods are the choice of the wine industry which is moving from using lead capsules.  Use a hot air dryer, air gun, or steam to shrink for an easy and effective way to seal your wine bottle.   Bag of 30.

Read more less