Wine Bottle Filler

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir.  The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir.   16.5" L x 16" W  x 21.25" H  Nozzle diameter: 12 mm (0.472441 inch)  

Read more less

Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5"H x 36"W x 18.5"D Reservoir is approximately 58 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

Portable, benchtop gravity-style wine bottle filler Deluxe model with electronic level sensor and nitrogen injector valve Six filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 66L reservoir Fill up to 100 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Fill up to 100 cases of 750ml bottles per hour. The Deluxe model comes with an electronic level sensor that can be wired to a pump and a manual nitrogen injector valve mounted to the side. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 66L reservoir 110 pounds 42" H x 34" W x 20" D Please note: the example photo shows the 4-spout version of the bottle filler.

Read more less

Portable, benchtop gravity-style wine bottle filler Four filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 45L reservoir Fill up to 65 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features four filling heads and stainless steel construction. Fill up to 65 cases of 750ml bottles per hour. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for various bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. This unit is also available with Electronic Level Sensor and Nitrogen Injector (WE254). Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 670L per hour fill rate 45L reservoir 84 pounds 42" H x 23" W x 20" D Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D Runs on 220V Power, and comes with a bare cord. You will need an electrician to come and wire the appropriate plug.

Read more less

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is lowered onto filling spout and locked into place with built-in bottle neck clasp. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir.  The clasps around each fill head will hold the bottles in place during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 15L reservoir.  

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Included 4" casters make this unit very easy to move around. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler versus a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir Included 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 180 pounds 71" H x 34" W x 26" D

Read more less

Replacement Power Supply for the Cannular Can and Bottle Filler. 24V DC. 110V plug. KegLand Part Number: KL37730

Read more less