If your yearly production involves around a few 1-5 gallon lots of wine, then carboys are probably the only wine storage container you will need for storing wine. However, if you are making 30+ gallon lot sizes, then at some point it makes sense to look into a larger volume tank for your wine storage needs!
Stainless Steel Tanks:
While MoreWine! has a limited amount of tanks that are brought in as inventory throughout the year, the majority of our customers stainless steel wine tanks are ordered once a year as part of our annual Preseason Sale.
Sealed and open-top tanks are available in a wide variety of sizes and configurations. Feel free to let us know if you have any questions at all by giving us a call at 1-800-600-0033 or by e-mailing us at info@morewinemaking.com.
Oak Wine Barrels:
MoreWine! offers both new and refurbished oak wine barrels. Please check our oak wine barrel section for Cooper, wood-type, size and availability.
Wine Containers / Vessels
-
Plastic PET Carboy - 6 Gallon
Our Plastic Carboy fermenters are made from PET plastic (same as 2L soda bottles) which is far more resistant to oxygen than regular plastic. Plastic PET carboys are safer than glass carboy fermentors. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. Specifications Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.5 lbs Rated to 140 degrees F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Can withstand up to 10 psi of pressure with no deformation The bases have switched from flat to semi-flat to prevent sediment disturbances during transers
$36.99
-
Stainless Spigot for Speidel Plastic Fermenters
Stainless Spigot for the Speidel plastic fermenter. This is a great upgrade if you are looking to improve your fermenter with a sturdier spigot. Made from 304 stainless steel. 3/8" barb on outlet
$30.99
-
Replacement Locking Cap for Speidel Fermenters
This is a replacement cap for our line of Speidel Plastic Fermenters. It has a gasketed seal, and serves to close the fermenter. This is also the same cap used on our Speidel Tank Airlocks.
$4.99
-
Plastic PET Carboy - 5 Gallon
Our Plastic Carboy fermenters are made from PET plastic (same as 2L soda bottles) which is far more resistant to oxygen than regular plastic. Plastic PET carboy fermentors are safer than glass carboys. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. Specifications Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.5 lbs Rated to 140 degrees Height: 19 inches Diameter: 10.5 inches Completely taste and odor free Carboys can now withstand up to 10 psi of pressure with no deformation The bases have been switched from flat to semi-flat to prevent sediment disturbances during transfers
$33.99
-
Plastic PET Carboy - 3 Gallon
Our Plastic Carboy fermenters are made from PET plastic (same as 2L soda bottles) which is far more resistant to oxygen than regular plastic. Plastic PET carboys are safer than glass carboys. Full carboy fermentors can be heavy and hard to maneuver and glass can break resulting in possible injury. Specifications Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees Height: 16 inches Diameter: 9 inches Completely taste and odor free Can withstand up to 10 psi of pressure with no deformation The bases have switched from flat to semi-flat to prevent sediment disturbances during transers
$28.99
-
Replacement Rubber Airlock Stopper for Speidel Plastic Fermenters
Replaces the rubber airlock stopper that comes with our Speidel plastic tanks. Does Not include the airlock shown in the photo. Stopper height: 1 3/8". Upper diameter 1 3/4". Lower diameter 1 7/16". Inner diameter 11/16". Color may vary.
$5.99
-
Replacement Airlock for Speidel Plastic Fermenters
Replaces the oversized airlock that comes with our Speidel plastic tanks. Does Not include the stopper shown in the photo. Height 5 3/8". Outer diameter 2 7/8". Stem outer diameter 23/32". Stem inner diameter 9/16".
$6.49
-
Farro Glass | Glass Carboy | Wide Mouth | Carrying Harness
Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. Each carboy comes with a carrying harness. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.
$21.99
-
Italian Glass Carboy | Fermenter | Narrow Mouth | 11.3L | 3 Gallon
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 3-gallon size works great for splitting up batches, making mead, and topping off wine. Our top recommendation for glass carboys. Specifications: Weight: 9.0 lbs Dimensions: 17.0"H x 9.5"W x 9.5"D Made in Italy
$43.99
-
FerMonster - Solid lid
Fermonster solid lid. Fits all sizes. Does not include a gasket.
$5.99
-
Italian Glass Carboy | Fermenter | Narrow Mouth | 18.9L | 5 Gallon
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 5 gallon size works great as a secondary fermenter and for fermenting meads/wine. Our top recommendation for glass carboys. Specifications: Weight: 12.4 pounds each Dimensions: 20.0"H x 11.0"w x 11.0"d Country of origin: Italy
$54.99
-
Fermonster - Replacement Lid O-Ring
Replaces lid o-ring for all sizes of Fermonster Plastic Carboys.
$3.99
-
FerMonster 7 Gallon Plastic Carboy
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind, and still sells for less than $30. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The smooth ribless walls are a feature that reduces yeast and sediment buildup, and imbedded are volume markers at five, six, and 7 gallons. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon is a monster of a fermenter, reducing blowoff issues seen with standard carboys. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse; and while movement is manageable, these can be upgraded with our Carboy Carrier. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is impermeable to Oxygen penetration Volume Markers at 5, 6, and 7 Gallons O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$44.99
-
Fermonster Carboy - 3 gal.
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
$38.99
-
Silicone Gasket for Speidel Plastic Tank Adapters
Silicone gasket to fit our Speidel plastic tank adapters (FE740, FE741, FE742, FE745, FE746).
$2.99
-
FerMonster 6 Gallon Carboy With Spigot
The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$43.99
-
Replacement NW10 Spigot for Speidel Plastic Fermenters
Replaces the spigot and collar that come with our Speidel plastic tanks.
$9.99
-
FerMonster Lid Opener
Got a stuck lid on your Fermonster? Get it open much easier with this specially designed lid opener. It easily slides onto the lid and gives you comfortable hand grips to open a stuck lid. Note: We do not recommend using this tool to tighten the lid because the seal is made by the o-ring and not the pressure between the lid and neck.
$5.99
-
Italian Glass Carboy | Fermenter | Narrow Mouth | 22.7L | 6 Gallon
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 6 gallon size works great as a primary fermenter for beer, wine and mead. Our line of Itailan carboy is our top recommendation for glass carboys. Specifications: Weight: 14.0 pounds each Dimensions 21" x 11" Country of origin: Italy
$65.99
-
Farro Glass | Glass Carboy | Wide Mouth | Carrying Harness | Ported w/ Spigot
Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease. Each carboy comes with a carrying harness. See below for optional stainless steel spigots. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock Plastic spigot with 3/8" OD barb (tapers from 10-12mm) 20mm (0.78") diameter spigot hole 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.
$26.99
-
FerMonster 6 Gallon Carboy
The Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$42.99
-
FerMonster 7 Gallon Carboy With Spigot
The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$49.99
-
Fermonster 1 Gallon Carboy
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
$19.99
-
Replacement Lock Nut for Speidel Fermenters
Replacement lock nut that comes with the Speidel plastic tanks.
$9.99
-
Grommeted Airlock Cap for Speidel Plastic Fermenters
Using your existing Speidel lock ring and gasket this airlock cap screws right into the lid of your Speidel plastic fermenters. The grommet will fit standard 3-Piece or S-Shaped airlocks. The cap also provides a tighter seal because it is screwed into the cap where as the Speidel stopper only pushes into the lid.
$4.99
-
FerMonster - Lid with Hole
Replacement Lid with hole for all sizes of Fermonster Plastic Carboys. The lid was recently redesigned and reinforced to be stronger and prevent cracking issues reported by customers. The design was also updated to improve how the o-ring sits in the lid. Does not include o-ring.
$5.99
-
Glass Carboy | Fermenter | Smooth Neck | Narrow Mouth | 6.5 Gallon
The large 6.5 gallon size of this carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. This carboy has a smooth neck which uses standard carboy fermentor hoods. Dimensions: Height: 22.75 inches Width: 12.5 inches Lead-free
$64.99
-
Wood Barrel Spigot - 8 cm (3 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The 8 cm spigot is approximately 3-1/8" long. The shaft tapers from 9.5 mm (3/8") at the small end, up to 12 mm (15/32") wide.
$6.59
-
7 gal | Brew Bucket Classic | Ss Brewtech
Upgrade your home winery with an innovative, Stainless Steel, Brew Bucket™ Fermenter! You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use! Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ is not only functional it is downright beautiful. At MoreWine! we know winemaking equipment and we truly believe this is a piece of equipment you are going to enjoy using every season. While originally designed for Home Beermaking, the Brew Bucket has proven itself as a great addition to the home winery. Stainless Steel construction means easy cleaning and long lasting durability, while a tightly clamped gasketed lid means no oxygen permeation and premature spoilage of your wine. This is a great unit for small fermentations, test batches, and kit wines. The entire lid lifts off, making additions or stirring of must hassle-free. Cleaning is equally easy, as the stainless steel construction will resist tartaric buildup, and the wide opening allows for scrubbing if necessary. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket super easy to move. Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some wine! Features: Certified Food Grade 304 Stainless Steel Construction Patent Pending Stainless Rotating Racking Valve 6.95 gal Max Capacity 40° Conical Bottom for Trub Trapping Nests for Storage, Stacks for Ferment! Molded Silicone Lid Gasket Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 21” Height x 13” Width 10 lbs Note: 1/2" Silicone fits into the lid hole for use as a blowoff. 3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.
$149.95
-
Wood Barrel Spigot #0 (5 1/4 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #0 spigot is approximately 5-1/2" long. The shaft tapers from 16 mm (11/16") at the small end, up to 24 mm (15/32") wide.
$8.79
-
Wood Barrel Spigot #3 (8 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #3 spigot is approximately 8" long. The shaft tapers from 24 mm (15/16") at the small end, up to 32 mm (1-1/4") wide.
$10.99
-
Wood Barrel Spigot #2 (7 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #2 spigot is approximately 7-5/64" long and 24 mm (61/64") at the small end.
$9.89
-
Stainless 1/2 in. Coupling for Speidel Plastic Fermenters
This attachement can be used to replace the spigot or the airlock on your Speidel plastic fermenter and give you a 1/2 in. MPT to the outside and a 1/2 in. FPT on the inside. This allows you to attach a variety of components on the inside and outside of your fermenter. This coupling uses the standard speidel lock ring and gasket.
$14.99
-
American White Oak Barrel | Medium Toast | 5L | 1.32 gal
These new 5L barrels are hand made from American White Oak and flamed to a medium toast. Great for ageing beer, wine and spirits. Comes standard with a spring-loaded spigot for easy dispensing. An optional stainless steel spigot is also available. Features: 5 L (1.32 gal) American White Oak Medium toast Raw Exterior (Non-Varnished) for easier leak prevention techniques Stainless Alloy Rings coated in a protective black coating Food grade reinforced plastic screw in cork Spring-loaded spigot for easier dispensing Barrel Wax Block Stand included KegLand Part Number: KL04657
$142.99
-
Wood Barrel Spigot #1 (6 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #1 spigot is approximately 6 5/16" long and 18 mm (23/32") at the small end.
$9.89
-
Replacement Lid Gasket for Speidel Rectangular Plastic Fermenters - 60L, 100L, 200L, 300L, 500L
Replacement lid gasket for 60L - 500L Speidel Rectangular Plastic Storage tank lids. Please note these replacement gaskets are for the newer generation tanks introduced in 2017. A redesign of the lid called for a different sized gasket. The new generation gaskets are 7-3/4" in diameter and 3/8" thick. The older generation gaskets are 7" in diameter, and 1/4" thick. For the Pre 2017 lid gasket please see FE736.
$4.99
-
Wood Barrel Spigot #4 (8 1/2 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden handle and spout, and a plastic valve insert. Spigots are sold individually, with no packaging. The #4 spigot is approximately 8-3/4" long and 27 mm (1 1/16") at the small end.
$12.49
-
Thermowell and Grommet for Speidel Plastic Fermenters
Looking to add a thermowell to your Speidel plastic fermenter? This is the perfect way to do it. This thermowell replaces the airlock on top of your fermenter and uses the standard Speidel locking nut and gasket. The rubber grommet will fit standard 3/8 in. airlocks and the thermowell will accept most temperature probes. Please note that while using the stock spigot lock ring and gasket for the thermowell, you will have to use the solid locking cap where the spigot is normally located. In order to use the thermowell and spigot silmultaneously, you will need to purchase a second spigot or lock nut.
$14.99
-
Wood Barrel Spigot #6 (10.5 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #6 spigot is approximately 10-1/4" long and 34 mm (1-11/32") at the small end.
$15.49
-
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless dip tube for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.
$24.99
-
BrewBuilt® Neoprene Carboy Sleeve
The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. Highly recommended for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and greatly assist in cold crashing. The sleeves are 6 mm thick with stitched piping on the edges for exceptional durability. SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20
$24.49
-
FerMonster 1 Gallon Ported Carboy With Spigot
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind! These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$23.99
-
3.5 gal | Brew Bucket Mini Fermenter
Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter! Many have asked for a smaller BrewBucket, and that has been heard. The Brew Bucket mini is perfect for 2.5 gallon batches. With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches. Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice. Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermentors that are easy and enjoyable to use. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move. Features: 304 SS Food Grade Construction Rotating Racking Arm & Valve (Patent Pending) 3.5 Gal Max Capacity (2.5 gal Batches) 40° Conical Bottom for Trub Trapping Nests for Storage & Stacks for Ferment! SS lid w/ Silicone Gasketed seal Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 8.5" Bottom Width / 11" Top Width x 16" Height Please note: the thermowell pictured in the second photo is not included.
$149.00
-
Wood Barrel Spigot #5 (9 1/4 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #5 spigot is approximately 9-7/16" long and 32 mm (1-1/4") at the small end.
$13.49
-
Italian Glass Carboy | Fermenter | Threaded Neck | Narrow Mouth | 24.6L | 6.5 Gallon
Made in Italy, these are premium glass carboys that are better than other carboys on the market because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This large 6.5 gallon size carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. This carboy has a smaller threaded neck than standard carboys, and requires a specific hood for use with racking, and fermenting. Our line of Itailan carboy is our top recommendation for glass carboys. Specifications: Weight: 20.0 pounds each Dimensions: 21.0"h x 12.5"w x 12.5"d" Country of origin: Italy
$69.99
-
Stainless Dip Tube & Thermowell for Speidel Plastic Fermenters
Stainless dip tube and thermowell for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.
$29.99
-
Replacement Lid for Round Plastic Speidel Tank | 20/30L
This is the replacement lid for the 20/30 L Speidel Round Plastic Fermenters. While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced. This lid fits our 20 l (5.3 gal) & 30 l (7.9 gal) Speidel Round Plastic Fermenters. Please note: This product consists of 3 pieces. One outer threaded ring, one top cover and one gasket
$14.99
-
FerMonster 7 Gallon Ported Carboy (Spigot Not Included)
The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported to allow a spigot Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$40.99
You have seen 48 out of 128 products