Wine Fermentation Additives

A new, advanced formulation of Go-Ferm Go-Ferm Protect is a natural yeast nutrient that is added to the yeast hydration water before adding your selected yeast strain. Its complex formula provides your yeast with the proper sterols, unsaturated fatty acids and micronutrients needed to begin fermentation in optimal shape. The great thing about Go-Ferm Protect is that the proper nutrients and vitamins are introduced BEFORE the yeast is added to the must. This way 100% of the nutrients are available to your selected yeast strain and won't be stolen away by any indigenous yeast or bacteria that may be present in the must before your yeast can become established. Go-Ferm Protect was created as a result of a multi-year study of problem fermentations by Lallemand and the National Agricultural Research Institute (INRA) in France. During this period, they looked at the adverse effects on the yeast from overripe fruit (>28 Brix), low nutrient levels, overclarification of the juice and poor fruit quality (Botrytis, rot, high bacteria count, insecticide and fungicide residue). Their research showed that musts deficient in sterols and unsaturated fatty acids made yeast more susceptible to ethanol toxicity (high alcohol), osmotic shock (high sugar), temperature and others stress factors. In response to this data they created the NATSTEP (NATural STErol Protection) process that incorporated sterols, unsaturated fatty acids, as well as vitamins and minerals into an advance yeast hydration nutrient: Go-Ferm Protect. Go-Ferm Protect provides a combination of protective and nutritional benefits that ensure your yeast begins your fermentation in peak form! The best part is that if your fruit is in great shape then Go-Ferm Protect will simply help your yeast out that much more! Go-Ferm Protect does not contain any DAP, as DAP is harmful to the yeast during the rehydration process. GO-Ferm is usually used in conjunction with our Fermaid K yeast nutrient; where Go-Ferm Protect is used at yeast hydration then Fermaid K is added at the first signs of fermentation and again after 1/3 sugar depletion. Use: Use at a rate of 1.25 g Go-Ferm Protect per 1 g of yeast. A rough approximate of weight is 1 tsp = 3.2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates. Click Here for a copy of MoreWine!'s Guide to Yeast Rehydration Like Go Ferm Protect? Then you will love CellarScience® FermStart!

Read more less

Fermaid K – Complete Yeast Nutrient for Strong, Clean Fermentations Provides a balanced blend of organic and inorganic nitrogen to support vigorous yeast growth Delivers consistent fermentation kinetics and helps prevent sluggish or stuck ferments Reduces the risk of off-aromas such as hydrogen sulfide by supporting healthy yeast metabolism Enhances fermentation security, especially in high-sugar musts or stressful conditions More immediately available YAN than Fermaid O due to its inclusion of diammonium phosphate (DAP) Fermaid K is a widely used yeast nutrient developed by Lallemand to support strong, reliable alcoholic fermentations. It contains a combination of inactivated yeast (for organic nutrients) and diammonium phosphate (DAP) to supply both slow- and fast-release nitrogen. This dual-action profile provides yeast with the nutrients they need throughout the growth phase and active fermentation, improving cell viability, reducing fermentation stress, and minimizing the formation of undesirable sulfur compounds. Fermaid K is especially effective in fermentations that begin with low YAN, high sugar content, or other challenging conditions that demand immediate nitrogen availability. Fermaid K contributes approximately 1 ppm of measurable YAN for every gram per hectoliter used. That means: 1 gram per liter adds 100 ppm of YAN 1 gram per gallon adds approximately 378 ppm of YAN In comparison, Fermaid O contains only organic nitrogen and provides about 0.4 ppm measurable YAN per gram per hectoliter, or 40 ppm per gram per liter, and 151 ppm per gram per gallon. Fermaid O is preferred for slower, more controlled fermentations or when avoiding inorganic nitrogen is important. Fermaid K is ideal when rapid yeast growth and fermentation speed are critical. Protocol Rehydrate yeast first, then add Fermaid K at the end of the lag phase (typically around 24–48 hours after inoculation or at approximately 1/3 sugar depletion). Suspend in 10 times its weight of clean must or water, stir thoroughly, and add to the fermenting must with adequate mixing. Avoid adding at the same time as sulfites or enzymes. Usage Rates Recommended dosage: 20–40 grams per hectoliter = 0.2–0.4 grams per liter = 0.76–1.5 grams per gallon Adjust dosage based on initial YAN content, fermentation conditions, and yeast strain requirements. Use higher rates in low-YAN musts or high Brix ferments to maintain healthy yeast activity throughout. Comparing the Yeast Available Nitrogen contribution of Fermaid K vrs Fermaid O If you add 1 gram per liter of Fermaid K, it contributes 100 ppm of YAN. If you add 1 gram per gallon of Fermaid K, it contributes approximately 378 ppm of YAN. If you add 1 gram per liter of Fermaid O, it contributes 40 ppm of YAN (Yeast Assimilable Nitrogen). If you add 1 gram per gallon of Fermaid O, it contributes approximately 151 ppm of YAN.   A rough approximate of weight is 1 tsp = 4.7 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.  

Read more less

Potassium Metabisulfite, (often referred to as "SO2", "sulfites" "meta", or "meta-bi") has several uses in winemaking. At the crush, sulfites are generally used to help control the spoilage bacteria and indigenous yeast that may already be present both on the fruit and in the winery (i.e. on the picking bins, processing equipment, tanks, tubing, etc). The amount generally used is enough to inhibit most of the unwanted organisms but not enough to hinder a cultured yeast, which has a higher tolerance to sulfites than most of the indigenous organisms do. This inhibition effectively "wipes the slate clean" for the cultured yeast to step in and rapidly colonize the must so that it can effectively dominate the subsequent fermentation. In addition, sulfites also help to inhibit the enzymatic browning of both musts and finished wines so that all of their delicate complexities can be preserved. Later, during storage and in the bottle, sulfites at the proper levels will further protect a wine by continuing to inhibit spoilage organisms, as well as by scavenging oxygen. Note that the exact amount needed to effectively do the job is determined by the pH of the wine. Refer to our MoreManuals! on Red or White Winemaking or one of the winemaking books that we offer for a complete explanation on how to properly manage sulfites. In addition, it's important to keep in mind that free SO2 levels fall faster in wood cooperage than in glass or stainless, so if you are using a barrel you will most likely need to manage sulfite levels more closely. The most common form of Metabisulfite is as a powder which is fixed with potassium or sodium. 1/4 tsp of Potassium Metabisulfite adds 50ppm to 5 gallons of must. Old Metabisulfite loses potency with time and should be replaced every year to assure that you are getting correct levels. You can use old Metabisulfite to make solutions for sanitizing equipment.

Read more less

Acti-ML – Lallemand Nutrient Blend for Reliable Malolactic Fermentation Stimulates fast and complete malolactic fermentation in challenging wines Provides essential peptides, vitamins, and minerals to support Oenococcus oeni Reduces lag phase and promotes bacterial survival during MLF Helps avoid sluggish or stuck malolactic fermentation, especially in high-alcohol or low-pH wines Optimized for co-inoculation or sequential inoculation, with a formulation superior to generic yeast hulls Acti-ML is a complex nutrient blend developed by Lallemand to support the specific needs of malolactic bacteria during MLF. It is composed of yeast autolysates and naturally derived components rich in peptides, amino acids, vitamins, and minerals. These nutrients are critical for Oenococcus oeni, especially in conditions where nutrient content is limited or inhibitory compounds like alcohol, low pH, or SO₂ are present. Acti-ML shortens the lag phase and improves cell viability, helping ensure a strong and complete malolactic fermentation. Compared to simple yeast hulls or non-specific nutrients, Acti-ML is formulated specifically for malolactic bacteria, giving winemakers a more targeted and effective solution. Protocol Suspend Acti-ML in 10 times its weight of clean, chlorine-free water or wine at 20–25°C. Allow to hydrate for 5–10 minutes with gentle stirring. Add to the wine just before or at the time of malolactic bacterial inoculation. Compatible with both co-inoculation (24–48 hours after yeast inoculation) and sequential inoculation (after alcoholic fermentation is complete). Ensure thorough mixing in the tank. Usage Rates Recommended dosage: 20–40 grams per hectoliter = 0.2–0.4 grams per liter = 0.76–1.5 grams per gallon Use the lower end of the range for clean, balanced wines with moderate alcohol and the higher end for wines with elevated alcohol, low pH, or other stress factors.

Read more less

Due to high demand, the 10 kg is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Fermaid O is a newer formulation of the same Fermaid K that winemakers everywhere have learned to trust their ferments to. The main difference in composition between the two, is that the Fermaid O has replaced the inorganic DAP with an organic source. In terms of how this benefits the winemaker, there are several points! Features: Organic Nitrogen is easier for your yeast to digest, resulting in a smoother, more consistent fermentation. Fewer fermentation spikes means better yeast health, and the ability to ferment to its full capacity. Compared to DAP, Fermaid O will result in lower heat output from the yeast, and lower levels of negative sulfur compounds. This is a nutrient which will boost the quality of wine, regardless of process. Lower heat production, less negative flavor compounds, better overall fermentation kinetics and flavors! To Use: Use at a rate of 1.5g / gal of must/juice. Like Fermaid O? Then you will love CellarScience® FermFed DAP Free Yeast Nutrient!

Read more less

Opti'Malo Plus – Lallemand Nutrient for Strong, Secure Malolactic Fermentation Supports rapid and complete malolactic fermentation by enhancing Oenococcus oeni performance Provides a balanced supply of amino acids, minerals, and co-factors critical for bacterial health Reduces lag phase and improves survival of malolactic bacteria under stressful conditions Helps prevent sluggish or incomplete MLF in wines with low pH or high alcohol More effective than generic yeast hulls due to its targeted formulation and refined composition Opti'Malo Plus is a specific inactivated yeast nutrient developed by Lallemand to promote efficient malolactic fermentation. It delivers key micronutrients, peptides, and vitamins that are essential to the growth and metabolism of Oenococcus oeni, especially in conditions where nutrient deficiencies or inhibitors like alcohol and low pH are present. By stimulating faster cell adaptation and stronger bacterial activity, Opti'Malo Plus helps reduce the risk of sluggish or stuck malolactic fermentations. Compared to general-purpose yeast derivatives, Opti'Malo Plus is more targeted and efficient. Opti'Malo Plus differs from Lallemand’s Acti-ML in that it contains a more refined composition with higher concentrations of peptide fractions and co-factors that directly support the metabolic activity of Oenococcus oeni. While Acti-ML also promotes MLF by providing nutrients, it includes a broader mix of yeast hulls and autolysates designed more for cell survival. Opti'Malo Plus is better suited for wines under significant stress—such as low pH, high alcohol, or nutrient depletion—and offers enhanced performance for both co-inoculation and sequential inoculation strategies. Protocol Suspend Opti'Malo Plus in 10 times its weight of chlorine-free water or wine at 20–25°C. Allow to hydrate for 5–10 minutes with gentle stirring. Add to wine immediately before or at the time of malolactic inoculation. It may be used in co-inoculation (24–48 hours after yeast inoculation) or in sequential inoculation after alcoholic fermentation is complete. Mix thoroughly to ensure even distribution. Usage Rates Recommended dosage: 20–40 grams per hectoliter = 0.2–0.4 grams per liter = 0.76–1.5 grams per gallon Use the low end of the range in balanced wines with moderate alcohol and acidity. Increase up to high end in wines with low pH, high alcohol, or nutrient-depleted conditions to ensure full and secure malolactic fermentation.

Read more less

OptiRED – Lallemand Yeast Derivative for Color, Body & Tannin Integration in Red Wines Enhances early formation of polysaccharide–polyphenol complexes for more intense, stable color Rounds and smooths tannins to reduce harshness and astringency Builds fuller body and improved mouthfeel without altering varietal expression Can be used at the start or during fermentation for flexible control over tannin structure Outperforms generic inactivated yeast products by delivering high‑molecular‑weight mannoproteins via MEX™ processing OptiRED is a tailored inactivated yeast derivative produced by Lallemand using an innovative MEX™ method that makes high-molecular-weight polysaccharides immediately available in the must. When introduced early during maceration or alcohol fermentation, these compounds complex with freshly released anthocyanins and tannins, protecting color integrity and creating softer, more integrated tannin profiles. The result is a red wine with enhanced intensity, smoother palate, improved structural balance, and longer-term color stability—without over‑manipulating varietal character. This effect is particularly noticeable in light‑ to medium‑bodied reds or in vintages with lower phenolic maturity. Protocol Suspend the recommended dose in 10× its weight of clean must or water. Stir thoroughly to ensure full dispersion, then add at one of these points: • At the beginning of maceration or alcoholic fermentation for enhanced color protection and tannin integration • Toward the end of fermentation to smooth out persistent harshness without affecting initial extraction. Usage Rates Recommended dosage: 20–40 g per hectoliter = 0.2–0.4 g per liter = 0.76–1.5 g per gallon For standard use, 30 g/hL (0.3 g/L or ~1.14 g/gal) provides excellent balance between color enhancement and mouthfeel refinement. For home users a rough approximate of weight is 1 tsp = 2.6 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

MoreWine!'s Tartaric Acid is processed naturally in Europe from grapes and is the preferred acid for adjusting acid levels in wine. Be aware that a lot Tartaric Acid available to home winemakers is artificially made, comes from China, and does not integrate into the wine as well. Some of this tartaric includes the designation of "food-grade". Because MoreWine! packages this product you can be assured you are getting the highest winery-grade quality. 3.8g per gallon adjusts acidity by +.1%. As a note: some tartaric acid will drop out of suspension as potassium bitartrate if you are doing any cold stabilization. You might want to re-test total acidity after cold stabilization.

Read more less

Specially formulated enzyme preparation for improved color intensity and stability, greater mouthfeel, and enhanced fruity, floral, spicy flavors in wine. Used primarily in red wines for the aforementioned reasons, it can also be used in white wines for increased extraction (however we recommend Lallzyme C-Max for whites because it helps the solids settle out as well). Based on the activity of a blend of cellulases, hemicellulases, and pectinases, this preparation aids in the extraction, then stabilization of water soluble phenols found in cells of grape skins. A dry, granular product requiring no special storage conditions prior to use. We have used this enzyme on our wine here at MoreWine and found the difference to be nothing short of amazing. Currently only available at MoreWine in this size! To use dissolve Lallzyme EX into a sufficient amount of water (usual ration is 1:100) and add to must with your other additions prior to the onset of fermentation. Dosage is 0.1g Lallzyme per gallon of must. Store dry enzyme at room temperature, around  25 C° (77 F°). Once rehydrated use within a few hours.

Read more less

This product replaces our TAN120 - Tannin VR Supra Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. How Fermentation Tannins Work Designed specifically for North American red wine fermentations, Scott'Tan FT Rouge is composed of exotic wood and chestnut tannins. These highly reactive tannins bind with anthocyanins (color compounds) in the first 3-4 days of fermentation. If sufficient natural tannins are not present in must, anthocyanins may precipitate, resulting in a loss of color. Using an enzyme like Lallzyme EX in conjunction with FT Rouge can enhance this binding of color. The continual bonding going on throughout the ferment will also improve the mid palate structure and help either significantly reduce or eliminate vegetal/herbaceous characters. Tannin additions at this early stage prove to be most efficient and are better integrated into the wine. Important!: If being used in conjunction with one another, tannins should be added 6-8 hours after the addition of the enzymes or you run the risk of having the tannins reacting with and removing the enzymes before they have had a chance to do their job!. To Use Sprinkle directly onto must and either mix well with your punch down tool or pump over to ensure thorough mixing. If adding to the wine post-fermentation we recommend allowing 3-6 weeks for full integration before racking, fining, filtering or bottling. Recommended dosage rate: 0.8-1.9 g/gal. Use at an initial rate of 1.3 gram per gallon during punch down/pump over. If you want additional tannin add at a rate of .25 g/gal. A rough approximate of weight is 1 tsp = 2.4 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates. Unopened the shelf life is 5 years at 18ºC(65ºF).

Read more less

A OptiWHITE – Lallemand Yeast Derivative for Freshness, Mouthfeel, and Oxidation Protection in White and Rosé Wines Protects delicate white and rosé wines from oxidation during fermentation Enhances freshness, aroma longevity, and color stability Improves mouthfeel and softness without adding bitterness Reduces the risk of browning and premature aging Outperforms generic inactivated yeasts due to its targeted composition and polysaccharide profile OptiWHITE is a specific yeast derivative developed by Lallemand through a proprietary production method that preserves functional compounds like glutathione precursors and polysaccharides. Added at the beginning of fermentation, OptiWHITE helps protect varietal aromas and prevents oxidative damage in white and rosé wines. This is especially valuable for wines with thiol or terpene-driven profiles, such as Sauvignon Blanc, Riesling, and Muscat. It contributes to a round, full palate with reduced astringency and bitterness, while preserving brightness and youthful aromas through aging. Compared to standard yeast hulls or inactivated yeast products, OptiWHITE delivers a cleaner fermentation environment with more reliable sensory impact. Protocol Add OptiWHITE directly to the juice or must at the beginning of alcoholic fermentation. Disperse in ten times its weight of clean water or must, then mix thoroughly into the tank. Best used before or during the first stages of fermentation. Do not co-add with bentonite or tannins. Usage Rates Recommended dosage: 20–40 grams per hectoliter = 0.2–0.4 grams per liter = 0.76–1.5 grams per gallon For home users a rough approximate of weight is 1 tsp = 3.4 grams  

Read more less

Lallzyme EX-V – Enzyme for Structured Red Wines with Enhanced Color and Tannin Stability Extracts color and tannins with improved integration for wines destined for aging Promotes stable anthocyanin-tannin bonding for long-lasting color Enhances mouthfeel, midpalate weight, and structural balance Improves juice yield and reduces solids through efficient cell wall degradation Balanced enzyme activity supports both extraction and finesse in premium red wines Lallzyme EX-V is a precision enzyme blend developed by Lallemand for red wine fermentations where structure, balance, and ageability are desired. It combines strong pectolytic activity with targeted cellulase and hemicellulase functions to break down grape skin cell walls, facilitating the release of anthocyanins and seed-derived tannins in a controlled, integrative manner. EX-V is ideal for varietals with moderate to firm skins or when crafting red wines intended for barrel aging, as it enhances phenolic complexity without over-extracting bitterness or astringency. Wines fermented with EX-V tend to show refined texture, vivid color, and excellent long-term stability. Comparison to Other Lallemand Maceration Enzymes: Compared to EX, which is best for early-drinking, fruit-forward reds, EX-V is designed for more structured, age-worthy styles with higher tannin and color stability.  EX = softer, fruit-driven reds for early release EX-V = structured, balanced reds with aging potential Protocol Dilute Lallzyme EX-V in 10 times its weight of chlorine-free water. Add to crushed grapes or must at the beginning of fermentation. Mix thoroughly for even dispersion. Optimal temperature range: 20–30°C. Avoid adding below 10°C or after alcoholic fermentation begins. Usage Rates Recommended dosage: 30–40 grams per ton of grapes = 0.66–0.88 grams per hectoliter (assuming 450 L/ton) = 0.0066–0.0088 grams per liter = 0.025–0.033 grams per gallon Use the lower end of the range for moderately structured fruit or extended maceration. Use the higher range for tighter-skinned grapes, shorter fermentations, or when greater phenolic extraction and color stability are required for barrel-aged or long-lived reds.

Read more less

This product replaces our TAN150 - Tannin Galalcool Enological tannins offer the winemaker, cider maker, or mead maker the possibility to add refined, highly-bindable tannin at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. Protection & Improved Structure! Designed for white/rose wine fermentations (including fruit wines, ciders, and mead), Scott'Tan FT Blanc Soft is a specially formulated, colorless tannin derived from Gall Nuts. When used at the beginning of the fermentation, FT Blanc Soft helps provide protection from oxidation so more of the wines delicate aromas and flavors are preserved. In addition, FT Blanc Soft's continual bonding going on throughout the fermentation improves mouthfeel and help significantly reduce or eliminate vegetal/herbaceous characters and bitterness. FT Blanc Soft imparts a perception of sweetness without contributing any sugars, along with a low-level, beneficial minerality. Note: FT Blanc Soft can also be used as an ageing tannin post-fermentation as well! To Use Add directly to the grapes at the crusher or to the juice/wine. Mix thoroughly to ensure homogenization. Note: If using FT Blanc Soft as an aging tannin, final addition should be made 3-6 weeks before bottling to allow for complete polymerization and settling. Recommended dosage rate: 0.2-0.6 g/gal (5-15 g/hL) A rough approximate of weight is 1 tsp = 2.3 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Used primarily in sanitizing solutions to lower pH, therefore making the SO2 solution more effective. Use 1 tbsp per gallon along with 1 tbsp meta per gallon. Citric is not added directly to must prior to either primary or ml fermentation as its metabolism can lead to volatile acidity. A rough approximate of weight is 1 tsp = 4 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.  Domestically produced in the USA. 

Read more less

Diammonium Phosphate (DAP). A source of nitrogen for yeast. Use .5 - .75 grams per gallon (1/2 tsp per 5 gallons) of must to aid yeast and help reduce later problems with hydrogen sulfide. There is a superior nutrient regimen (using Go-Ferm and Fermaid K) for wine making: Click here for a PDF of the MoreWine Manual on re-hydrating wine yeast and a recommended nutrient addition. A rough approximate of weight is 1 tsp = 3.1 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Enhances clarification and static settling of white and rosé musts under extreme conditions Active and fast depectinisation at low temperature, low pH, or high total pectin content Produces rapid, compact lees and improves juice quality consistently Requires lower dosage for effective results compared to standard enzymes Cinnamyl-esterase-free pectinase blend minimizes ethylphenol precursor release Lallzyme C-MAX™ is a micro-granulated pectolytic enzyme derived from Aspergillus niger, formulated for use in white and rosé wine production where settling conditions may be difficult. With high activities of pectin lyase, pectin methyl esterase, and polygalacturonase, it provides fast, efficient breakdown of pectin, even at low temperatures (as low as 8 °C / 46 °F) or low pH. Its action reduces must viscosity, speeds up clarification, and generates compact, easy-to-rack lees. Because it contains no cinnamyl esterase, Lallzyme C-MAX™ also limits the formation of ethylphenol precursors, contributing to cleaner, more varietally expressive wines. Protocol for Use: Add after pressing or directly into the settling tank. Dilute the enzyme in 10 times its weight in water or juice before use. Mix thoroughly for uniform distribution. Do not add bentonite during enzyme treatment. Clarification typically completes within 24 hours depending on temperature and juice conditions. Usage Rates: Standard conditions (>12 °C / 54 °F): 0.5–1.0 g/hL = 0.005–0.01 g/L = 0.019–0.038 g/gal Cold or high-pectin conditions (8–12 °C / 46–54 °F): 1.0–2.0 g/hL = 0.01–0.02 g/L = 0.038–0.076 g/gal Store in original sealed packaging at 5–15 °C (41–59 °F) in a dry place. Suitable for organic and vegan wine production.

Read more less

Start your fermentation right with FermStart by CellarScience®.  FermStart is a concentrated, micronutrient blend that helps yeast during the critical phase in which they transition from dried and dormant back into healthy and active.  FermStart is added to your rehydration water so that your yeast absorbs the nutrients as they absorb the water.  Rehydrating with FermStart prior to pitching your yeast also has the added benefit of allowing the yeast access to the nutrients before wild yeast in the must can uptake them.    Rehydrating with FermStart = Healthy Yeast Rehydrating your yeast is always recommended but is considered especially important at any Brix level above 14.  Rehydrating with FermStart is the gold level of hydration and helps protect your yeast against initial osmotic pressures, competition from wild yeast, and alcohol toxicity.  Proper hydration and healthy yeast have also shown to have a positive impact on flavor.     How Much? FermStart is a super concentrated formula, which is very convenient when you are rehydrating large amounts of yeast.  Use 1 gram of FermStart for every 4 grams of yeast.  We offer some suggested ranges for the amount of water to use below.     Examples: 8g yeast – Add 2g FermStart to 30-50ml of water 80g yeast – Add 20g FermStart to 300-400ml of water 500g yeast – Add 125g FermStart to 1500-2000ml of water   The Science of How it Works FermStart is rich in readily assimilable amino acids, sterols, vitamins, and natural glutathione.  Readily assimilable means that the size of the molecules present in FermStart are all extremely small and easily absorbed by the yeast cell. This is obtained by centrifuge and allows FermStart to be extremely concentrated and not contain filler.   The availability of readily assimilable amino acids allows the yeast cell to skip the step in which amino acids would be synthesized within the cell. This saved energy is instead directed into multiplication. Faster yeast cell multiplication means a faster fermentation start, allowing your yeast to out-compete wild yeast. Wild yeast have unknown flavors and fermentation behavior, so it is important to give your selected yeast the best chance to dominate the fermentation.    Sterols help the cell membrane regain and maintain elasticity helping to ensure a perfect start and continued performance throughout the fermentation. The strong cell membrane helps ensure that the yeast can survive and complete alcoholic fermentation under tough conditions.   Glutathione is a very special natural antioxidant and detoxifier made up of three amino acids – cysteine, glutamate, and glycine.  It is extremely important for maintaining intracellular health by preventing damage to cellular components during the very oxidative process of rehydration.      FermStart does not contain nitrogen which is detrimental to the yeast cell during hydration. Nitrogen can be added through the addition of FermFed or FermFed DAP free nutrients at the first signs of fermentation.  Another addition is then added at 1/3 sugar depletion to complete a total fermentation nutrient schedule.       For a full yeast nutritional plan, use FermStart when rehydrating your yeast, FermFed DAP Free at the onset of fermentation, and FermFed after 1/3 sugar depletion.  

Read more less

This product replaces our TAN130 - Tan'Cor Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. Aging tannins Tannin Complex is a tannin that is added post fermentation to improve the overall structure and to help protect the wine from oxidation during aging. It is composed of proanthocyanidins and ellagic tannins that integrate easily into young wines. Tannin Complex was specially developed to add structure and a soft mid palate to premium red wines without harshness or a forward oak finish. It can also enhance the varietal fruit character while adding complexity to the finish. Helps stabilize wines by improving the polyphenolic composition. It is especially useful when aging wines in older tannin-leached barrels and with full, fruity, lower tannin varietals like Syrah and Zinfandel. To Use: While racking or stirring, add Tannin Complex to the wine incrementally. Mix well to ensure homogeneity. Final addition should be made 3-6 weeks before bottling to allow for complete polymerization and settling. Use at the rate of 0.20-1.14 g/gal (5-30 g/hL) prior to aging. A rough approximate of weight is 1 tsp = 3.1 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Reduless is a new product from Lallemand that was designed to correct negative VSCs (Voltatile Sulfur Compounds) such as H2S (hydrogen sulfide, A.K.A. "rotten egg") and DMS (dimethyl sulfide, A.K.A. "cooked corn") defects in wine. Made from inactivated yeast that have been infused with copper using a proprietary process, Reduless is a much gentler H2S remedy on the wine than the traditional copper sulfate (CuSO4) treatment alone. If you have an H2S problem, then we recommend treating it with Reduless first. However, if the sulfur problem still remains after the Reduless treatment, then a bench trial with copper sulfate (CuSO4) is recommended. Note: The sooner you catch a sulfur problem the easier it is to deal with! To Use: Dissolve Reduless in 10 times it's weight in water and add immediately to the wine. Stir the wine gently to ensure a thorough homogenization. Rack or filter after 72 hours. Recommended Dosage: 0.4-0.6 g/gal. The maximum amount of copper that can be released into the wine using Reduless at the recommended dosage is 0.02 ppm.  

Read more less

Potassium Carbonate is used to lower acidity levels in wine. 3.8 grams per gallon will reduce acidity by about .1%. Potassium Carbonate requires that the fermenter be stored cold for several weeks after application (please see our guides to Cold Stabilization in the documents tab above). During the period of cold stabilization the tartaric acid drops out as potassium bitartrate. Doing a trial run with a small amount is strongly suggested to determine exactly what the drop in acidity will be. Calcium carbonate can be used in a similar manner and does not require cold stabilization. However it adversely affects flavor, takes month to precipitate out of solution, and preferentially reduces tartaric acid first before affecting malic or citric acid. A rough approximate of weight is 1 tsp = 8.3 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Volclay KWK Krystal Klear Bentonite is a clay-like mineral with a negative charge that, similar to Sparkolloid, removes positively charged particles. It is most effective when the wine is at a warmer temperature, so we recommend using it for fining in late spring or early summer. It also works better at lower pH levels because proteins have a stronger positive charge in more acidic conditions.  Generic Low-Level Fining for 5 Gallons: Blend 1/2 tsp (about 3g) of bentonite with 1/2 cup of hot water (140 to 200°F) in a blender for 1-2 minutes. Let the mixture sit for 60 minutes, then stir it well before adding it to the wine. Allow the wine to stand for 10-14 days before racking off. This method achieves a fining rate of 0.16g/L. Generic Mid-Level Fining: Follow the same steps as above but use 9 grams of bentonite and 3/4 cup of hot water. This method achieves a fining rate of 0.5g/L. More Scientific Approach: You can create a 5% bentonite stock solution and run bench trials to determine the lowest effective concentration for clearing the wine. Since fining is non-selective, it removes both undesirable particles like yeast and some desirable phenolic compounds. Therefore, it's best to use the lowest effective concentration. To make a 5% solution, dissolve 50 grams of bentonite in 850ml of hot water, mix thoroughly, and top up with water to a final volume of 1L. Set up trials with clear jars of equal volume, adding varying amounts of the solution to achieve addition rates between 0.3g/L and 2.0g/L. You’ll need to do some calculations to determine the right amount for your needs. Let the trials clear overnight. For more detailed technical information, consult BK653 - Monitoring the Winemaking Process from Grapes to Wine - Techniques & Concepts. Fining with Wine Kits: When using a wine kit made from concentrate, bentonite is typically added on the first day for a few reasons. It serves as a nucleation site for CO2 removal. The CO2 movement helps distribute the bentonite throughout the wine, allowing you to use less and achieve effective fining in a shorter time.  

Read more less

Feed your fermentation with FermFed DAP Free by CellarScience®. The 100% natural formulation of FermFed DAP Free is derived from the autolysis of very specific yeast strains naturally high in free amino acids, sterols, mannoproteins, zinc, magnesium, and niacin, along with vitamins B1, B2, B5, B6, and B12 for a complete yeast health regimen.  As the name suggests, this unique formulation does not contain the traditional inorganic diammonium phosphate, but does provide organically derived nitrogen. How Much Do I Add and When? The recommendation that covers most fermentations is to add 1.5 gram per gallon of FermFed DAP Free at the onset of fermentation and then add 1 gram per gallon of FermFed after 1/3 sugar depletion. Mix the nutrients in a small slurry of water and add to the fermentation.  Read more below if you are interested in measuring YAN (Yeast Available Nitrogen) and adjusting your nutrient schedule accordingly.   The Science of How it Works The different components of FermFed DAP Free work in different ways to feed and protect your yeast.   The complex and organic nitrogen in FermFed DAP Free helps eliminate excessive yeast growth in the initial phases, reducing fermentation heat spikes at the start of fermentation. Included sterols make the yeast membrane more resistant to alcohol and to high temperatures.  The collection of B-vitamins along with zinc and magnesium are essential for enzymatic activity, alcohol tolerance, and yeast health.  Mannoproteins help avoid the aromatic stripping during the fermentation by binding esters and terpenes and not allowing them to be driven off by CO2.  The included yeast hull components act as receptors to bind up fatty acids that can accumulate and cause stuck fermentations. Advanced - Adjusting Your Nutrient Schedule Based on YAN (Yeast Available Nitrogen) In addition to the nutrients provided by FermFed or FermFed DAP Free, yeast need a certain level of nitrogen to perform adequately. If deprived of nitrogen, yeast are more likely to produce off flavors, most notably hydrogen sulfide. When added at the rate of 1 gram per gallon, FermFed provides 38ppm of YAN while FermFed DAP Free adds 20ppm when added at the rate of 1.5 gram per gallon.    How much YAN do you need? Acceptable levels range from 175 to 300ppm.  YAN levels in grapes vary, with grapes from warmer climates often having less. The best practice is to measure your grapes using a commercial wine lab or the Vinmetrica YAN Test Kit along with a Vinmetrica Meter. If you know your YAN the following is a good general guide: 175ppm or above = FermFed DAP Free @ onset + FermFed DAP Free @ 1/3 completion (adds 40ppm YAN) 150ppm or above = FermFed DAP Free @ onset + FermFed @ 1/3 completion (adds 58ppm YAN) 125ppm or above = FermFed @ onset + FermFed @ 1/3 completion (adds 72ppm YAN) Below 125ppm = FermFed @ onset + FermFed @ 1/3 completion + extra DAP    For a full yeast nutritional plan, use FermStart when rehydrating your yeast, use FermFed DAP Free at the onset of fermentation, and use FermFed after 1/3 sugar depletion.  

Read more less

This product replaces our TAN140 - Tannin Plus Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. Aging Tannins Tannin Riche Extra is a preparation of 100% American oak tannin that has been lightly toasted to impart a soft, aromatic character while enhancing the structure and organoleptic complexity of a wine. Tannin Riche Extra is a great tool for imparting hints of coconut, a heightened vanillin oak character and a smooth finish to your wines. Although designed for fine-tuning a wine, Tannin Riche Extra still maintains the regular properties associated with the use of tannins such as helping with clarification, stability, oxidation, and aging. Works well in conjunction with low doses of other tannins (i.e: Tannin Complex & FT Blanc Soft). To Use: Dissolve the tannin in 10 times its weight in warm water (95F/35C). Add to the wine during a punch-down or pump-over for good mixing. Addition of Tannin Plus should be made a minimum of three weeks before bottling. Recommended dosage: 0.2-0.4 g/gal A rough approximate of weight is 3/4 tsp = 1 gram. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Wine Making Use Delvozyme (Lysozyme, Lysovin) for controlling lactic acid bacteria growth in your wine. Isolated from egg whites, this enzyme will degrade the cell wall of gram positive bacteria, but will not affect yeast or gram negative bacteria such as Acetobacter. Delvozyme can be used for both Red and White Wine Malo Fermentation. Dosage: To Delay Malolactic Fermentation: Red Wine - add to grapes at 100 - 200 ppm, or 0.38 - 0.76 grams per gallon. White Wine - Add to must at 200 - 300 ppm, or 0.76 - 1.14 grams per gallon. To Block Malolactic Fermentation: White Wine - Add to must or wine at 300 - 500 ppm, or 1.14 - 1.90 grams per gallon. Stabilizing wine after MLF is complete: Add to barrel during storage at 250 - 500 ppm, or 0.95 - 1.90 grams per gallon. When blending partial and complete MLF wines: Add immeditatley after blending at 300 - 500 ppm, or 1.14 - 1.90 grams per gallon, to reduce the risk of further malolactic fermentation (MLF). Within several days any lactic should expire. For sluggish or stuck yeast fermentation: Red Wine - Add at 150 - 400 ppm, or 0.57 - 1.52 grams per gallon. White Wine - add at 300 - 500 ppm, or 1.14 - 1.90 grams per gallon. Directions for use: You can make a 10% solution of Delvozyme in water (100 grams per liter of water). However we find the easiest method is to add the desired dry weight of Lysovin in 5x its weight of warm(tepid) water. Mix for one minute, allow this mixture to stand for 45 minutes and add to must, juice or wine while mixing well. Allow 24 - 48 hours for reaction to complete. **Note: 3tsp Delvozyme = 5g Beer Making Delvozyme can be used in beer making as well. Use either in the starter (recommended if you make starters) or when pitching (adding) the yeast to the wort, do not use over 140 F. Recommended dosages is 1 tsp per 5 gallons of wort. According to studies it has no effect on flavor or clarity. Storage: Should be stored at room temperatures in a dry environment, can be stored up to 5 years.

Read more less