Wine Making Hardware

Secure Fit: Designed with a ridge and gentle taper to prevent slipping or being sucked in, ensuring a reliable seal during use. Self-Sealing Vent: Equipped with vent holes that allow air to escape but prevent it from entering the fermenter. Easy Maintenance: Simple to clean and sanitize, making it highly convenient for repeated use. Replaces stopper sizes #8 and #9 This CellarScience Bung has a ridge to keep it from getting sucked in and self-sealing vent holes to let air out but not in. They have a gentle taper, so they don’t slip out during use.  They are also very easy to clean and sanitize. Replaces Stopper Sizes #8, #9 Stopper Measurements: 1.36" x 1.89" (34.5 mm x 48 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Breathable Carboy Bung and the Breathable Barrel Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.

Read more less

This stopper has two holes and we use it in the production of our #6.5 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all this junk into it, it still fits a carboy neck! Also fits perfectly into a 1.5" tri-clamp ferrule, and the stopper's flange will ensure it doesn't fall in. Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!

Read more less

Securely bung your full-size barrels with this locking bung. Great for tight bunging barrels while rolling them on their side, moving barrels from location to location, or simply for peace of mind that this bung will not accidently get knocked out of place. A stainless plate embedded in the silicone causes the bung to expand outward when tightened. This creates considerable pressure against the bung opening, ensuring a super solid seal. Use a crescent wrench or 1/2" driver to tighten the nut on top of the bung. Bottom of bung measures 1.5" and the top of the bung measures 2.5".

Read more less

Convert 1.5" tri-clamp to 1/2" Male Pipe Thread. Made from 304 stainless steel.

Read more less

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 1" Outer Diameter - 1.33"   Please Note: Made to Order lengths have a lead time of approximately 2 weeks.    

Read more less

Convert 1.5" tri-clamp to 1/2" barb for connecting 1/2" ID tubing. Made from 304 stainless steel.

Read more less

This airlock made from polypropylene is much less rigid and less likely to crack compared to standard three-piece airlocks. Toss it into a bucket of sanitizer with your other equipment and don't worry about it breaking. For both carboys and buckets. In our opinion 3-piece airlocks are superior to the triple ripple type in that they can be taken apart and cleaned. However, we do sell the triple ripple or S-shaped type in case you are used to that type and would like to stay with it. Please Note: Stopper Not Included.   KegLand Part Number: KL01595  

Read more less

1.5" clover by 1" MPT. Full Flow. 0.87" I.D.

Read more less

The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel  

Read more less

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!

Read more less

Includes ball lock gas-in quick disconnect (barb), 5 ft of 5/16" ID tubing, and two hose clamps.

Read more less

Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen before or during fermentation. Macro-oxygenation, or adding oxygen during the fermentation aids in promotion of yeast growth and general yeast health which results in stronger finishes and fuller flavored wines. In our experimentation, the oxygenation has helped to soften the wine by reducing the sensation of tannins, while simultaneously allowing more fruit to come through. Can also be used for degassing wine with nitrogen. Use with 1/4" ID tubing - D1702. Note: if you are using an aeration pump, we recommend a "deep water" type for aquariums, as these will have the necessary PSI to force the air through the stone and into the juice/must. You can learn more about the use of oxygen during fermentation by reading our Guide to Macro Oxygenation and Fermentation 316 Stainless 1/2" diameter. Stone is 1" in length. Overall length is 1 7/8" Sanitizing your Diffusion / Carb Stone: To properly prepare your stone for use, we recommend you boil the stone portion in water for 3-5 minutes. By heating the stone to boiling temperatures you kill all possible contaminants that may be hidden within the stones micro pores. Using a surface sanitizer is not a guarantee from contamination. Boiling also greatly reduces clogging issues by helping to remove sugar residue. If boiling is not an option, for whatever reason, we recommend the next best, soaking in Star San. Star San will remove a majority of surface contamination/bacteria, but will not sanitize the interior of the stone which may or may not be contaminated. Please note that you do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.

Read more less

Includes ball lock beverage-out quick disconnect (barb), 5 ft of 3/16" tubing, hand held faucet, and two hose clamps.  

Read more less

Stainless steel screw clamp. High quality. Fits tubing with an outer diameter between 2.25 and 3.12 inches.

Read more less

Ultra Barrier™ Gas tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC.  Advantages to this unique tubing are: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 51 psi  

Read more less

Convert 3/4" BSPP (Straight Thread) fittings to 1.5" Tri-Clover. Often used on 20x20 plate filters, where the stock 3/4" barbed inlet and outlet fittings are replaced with these to convert to 1.5" Tri-Clover. Use along with our H928 o-ring to form a seal on the straight threads.

Read more less

Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.

Read more less

You will need this washer anytime you connect flare fittings, except when connecting to our quick disconnects which include a built in washer.

Read more less

This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached. Stainless Steel barb with a chrome plated Brass nut.

Read more less

304-type stainless steel tri-clamp 90° elbow with 1.5" clamp ends.

Read more less

2" x 1.5" tri-clamp concentric reducer. Made from 304 stainless steel.

Read more less

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product.  

Read more less

When used with the male QD these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Male National Pipe Thread on the ends for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers.  

Read more less

Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. Manufactured from 304-type stainless steel with a polished finish. 2" tri-clover connection.

Read more less