Whether you're a professional winery, or are making small batches in your kitchen, hardware parts will be necessary. We offer dozens of hardware parts, from hose clamps to butterfly valves. Any hardware you'll need to make great wine can be found in the categories below!
Wine Making Hardware
Shop By Collection
-
Stainless - Full Coupler (1 in.)
Full Coupler with 1" Female Pipe Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless Hex Nipple - 1/2 in. BSP
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/2" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06453
$3.89
-
Pressure Gauge (LHT) | High Pressure (0-3000 PSI) | CO2 or Nitrogen Regulator | 1/4" MPT Left-Hand Thread
3000psi gauge tells tank pressure. Left hand thread replacement gauge for some brand regulators.
$16.99
-
Duotight In-Line Regulator | Built-In Pressure Gauge | 0-150 PSI | Liquid & Gas Compatible | 6.35 mm Duotight
The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing (D1723C or D1727C). Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL26918
$19.49
-
Dip Tube | Gas In | Corny Keg Part
For the gas in side. Stainless steel construction, approximately 1.5" in length.
$5.49
-
Slimline Torpedo Keg Sleeve
Neoprene keg sleeves for Slimline Torpedo Kegs. For the standard size Torpedo keg sleeves, see KEG650. Also compatible with standard cornelius kegs. 6mm thick.
$19.99
-
Torpedo Cocktail Keg | US D-Style Spear | Stainless Steel Keg | Low2 Keg Lid O-Ring | Superior Oxygen Barrier Properties
The ideal vessel for serving pre-mixed cocktails and other concoctions on draft Easily pour in your beverage of choice through the wide corny-style lid opening without needing to remove the spear Doubles as a line cleaning keg Rolled handles for a comfortable grip Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams The Torpedo Cocktail Keg is the ideal vessel for serving pre-mixed cocktails and other concoctions on draft. The corny keg style lid makes it easy to pour in your beverage of choice without having to fuss with removing the spear like with standard commercial sanke kegs. Hook up a D-Style keg coupler to begin carbonating the beverage from the bottom up. These kegs provide the added advantage of fully carbonating the entire cocktail. When making drinks on the fly, carbonation is lost quickly since you're mixing carbonated and still ingredients together. But when served from a fully carbonated keg, you can enjoy the bubbles in your glass for longer! Draft lines needing some love? The Torpedo Cocktail keg easily doubles as a line cleaning keg. Simply fill with a batch of LLC or BLC to give your bev lines a little TLC. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions: Height (in.) Diameter (in.) 1.5 Gal 10 9 3/8 2.5 Gal 13 1/4 9 3/8
$179.99
-
Brass Hose Quick Disconnect (QD) Set
Ease of Use! Easily connect and disconnect your water line to various equipment. This set includes one Male GHT x Male QD and One Female GHT x Female QD. GHT stands for Garden Hose Thread. Flow Direction These QD's must be placed in such a configuration that water is always exiting the female portion of the QD and entering the male portion of the QD. For example the female x female portion is placed on the end of the hose while the male portion is connected to your equipment. Adapt it to your needs We sell several adaptor pieces that allow you convert GHT to male or female 1/2 inch pipe thread. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.
$14.99
-
Stainless Tri-Clamp Ferrule | 2" T.C.
2" TC Ferrule for welding onto a tank or section of pipe. 304-type stainless steel. ID is approximately 1-7/8th.
$10.99
-
BrewBuilt® CoolStix™ Stopper for Fermonster & PET Carboys
Please note: This stopper was designed for use with the BrewBuilt CoolStix which has been discontinued. Two of the holes are for an airlock and thermowell, but the third 1/2" hole was intended for the CoolStix and you will need to plug it or utilize it how you see fit. This #10 3-hole silicone stopper is used alongside the BrewBuilt CoolStix for Carboys. The holes are for a 1/2" CoolStix, an airlock, and a thermowell. The holes measure 0.500", 0.413", & 0.375" Compatible with Fermonsters and our Plastic PET Carboys listed below under "You Might Also Need".
$8.79
-
KOMOS® 10 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 10 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 10 lb tank because it holds 10 lbs of compressed (liquified) CO2. 10 lbs of CO2 is enough to dispense about 20x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 20.75" T x 6.875 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$149.99
-
Slimline Torpedo Keg | Ball Lock Keg | Stainless Steel Corny Keg | Low2 Keg Lid O-Ring | Superior Oxygen Barrier Properties
The Slimline Torpedo Keg series features a smaller diameter to maximize the space in your kegerator or keezer Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Torpedo Kegs too wide? Want to squeeze another keg in your kegerator? The patented design, D794,899, of the Slimline Torpedo Keg is 9% more slim than the classic model with all the same great features. Coming in at about 1/4" thinner than standard Ball Lock Cornelius Kegs, this keg has welded stainless handles and the ability to stack kegs with fittings still in place all at a great price. Quality First Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Taking your keg on the go? Don't leave home without a custom tailored Slimline Torpedo Keg Sleeve! Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions: Height (in.) Diameter (in.) 1.5 Gal 11 8 3/8 2.5 Gal 15 5/8 8 3/8 5 Gal 25 1/2 8 3/8 For a slightly shorter keg, see our Standard Torpedo Kegs!
$119.99
-
Stepless Hose Clamp - 1/2 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/2" OD tubing (12-14 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06705
$10.99
-
Stainless Tri-Clamp Extension Tube - 2 in.
Extension tube with 2" tri-clamp fittings on both ends. 10" in length. Made from 304 stainless steel. Kegland Part Number: KL10665
$32.99
-
Stainless Tri-Clamp | 1.5" T.C. x 1/2" BSP Male
1.5" tri-clamp with 1/2" BSP male threads. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL01847
$16.49
-
Brass Hose - Female Garden Hose Thread x 1/2" MPT
Female Garden Hose Thread on one side with 1/2" MPT on the other. Useful for customizing your chilling configuration! A gasket is included inside the female garden hose thread portion.
$4.49
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 50 cm Diameter
Replacement air tubes for variable capacity tanks. 50 cm tube fits Marchisio 100 - 200 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$44.99
-
5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Made from corrosion resistant, engineered Aluminum New high quality CGA-320 valve DOT approved Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$89.99
-
Beverage Jumper Line - Ball Lock Quick Disconnect (QD)
Push product or sanitizer from one keg to the next. Two black, beverage quick disconnects with flare fittings attached via a one foot piece of beverage line.
$17.99
-
KegLand Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Flared
This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. This product is for the White Gas In connection on the left, for the Black Beverage Out connection, see our KEG732. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL03001
$18.99
-
Stepless Hose Clamp - 5/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/8" OD tubing (14-16 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06712
$10.99
-
DIN to Tri-Clamp Adapter | DIN NW 25 | 1" DIN x 1.5" T.C.
Speidel 1" DIN to 1.5" TC adapter. If you have a mixture of TC and DIN fittings, there is finally an adapter to help you connect everything together. To top it all off it is made with the expert craftmanship of Speidel.
$58.99
-
$4.39
-
$0.49
-
Ball Lock Post Bulkhead - Gas In
This gas in ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to one of our aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut. Kegland Part Number: KL03179
$14.49
-
Hose Clamp | 2-3/4" to 3-5/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
Strong stainless screw clamp that fits tubing with outer diameter between 2.75 and 3.62 inches.
$3.99
-
Stainless - 2" T.C. x 1" MPT
Adapts 2" Tri-Clover fitting to 1" Male Pipe Thread. 304-type stainless steel.
$30.99
-
ForgeFit® Stainless Butterfly Valve | 2" T.C.
This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The stainless steel handle can be rotated 180° for right or left hand operation.
$93.49
-
BrewBuilt® Stainless Pressure Gauge | 1.5" T.C. | 0-30 psi
A sealed pressure gauge is the most sanitary and safest solution for your needs. Designed to prevent krousen from plugging the gauge, it ensures longer-lasting performance and unparalleled reliability. This 1.5" tri-clamp pressure gauge is included with the BrewBuilt™ Kit for Fermenting Under Pressure but can be used with any stainless steel conical fermenter with 1.5" T.C. ports. Liquid filled gauges offer better performance and longer lifespan compared to dry gauges. Dial face reads in both psi and BAR. Sealed, liquid filled pressure gauge 0-30 psi 0-2.05 BAR 1.5" tri-clamp connection Made from 304 stainless steel
$65.99
-
Stainless Tri-Clamp Sight Glass | 1.5"
Monitor fermentation activity in a stainless steel conical Check flow and liquid clarity during transfers Harvest yeast and store with end caps Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 1.5" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch. 1.5" tri-clamp Approximately 6.25" long Max Pressure: 120 PSI Max Temperature: 300°F Made from 316 stainless steel KegLand Part Number: KL01816
$43.99
-
Stainless Barb - 1/4 in. Male BSPP x 5/16 in. Hose Barb
This Stainless Steel BSPP barb will connect any tubing with a 5/16" ID line to any fitting with a 1/4" Female BSPP connection. The barb is slightly oversized at 8mm (0.315") compared to 5/16" (0.3125") which will give you a tighter connection with your tubing. KegLand Part Number: KL06637
$2.79
-
Replacement Pressure Relief Spring - 20 PSI
20 PSI replacement spring for pressure relief valves. All SS, works with our D1830, as well as a replacement for our Counter Pressure Bottle Fillers.
$3.59
-
Replacement Kegland CO2 Tank Knob
Replacement knob for Kegland CO2 tanks. Compatible with tanks sized 2.5 - 20 lbs. KegLand Part Number: KL30625
$5.49
-
KOMOS® 5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$89.99
-
Keg Lid Foot
The foot for the swing arm on the keg lid. They are often missing on used kegs.
$1.49
-
Pin Lock Socket
We made this socket so that you can easily remove gas and beverage body connects on Pin Lock style kegs. (Currently a 3/8" drive)
$29.99
-
Ball Lock Post Bulkhead - Bev Out
This bev out ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut. Kegland Part Number: KL03162
$14.49
-
Stepless Hose Clamp - 3/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 3/4" OD tubing (17-20 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06736
$10.99
-
Stepless Clamp Tool
Clamp tool for stepless clamps. Kegland Part Number: KL07054
$10.99
-
Beer & Gas Tubing Quick Disconnect (QD) - 3/8" Barb x Female Shut-off
These quick disconnects feature 3/8" barbed fittings which can be used with 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.
$10.99
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 2"
2" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.5" long.
$92.49
-
ForgeFit® Stainless Tri-Clamp | 4" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 4" tri-clamp Made from 304 stainless steel
$17.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 2.5"
EPDM gasket for 2.5" tri-clamp connection. Temperature rated from -30°F to 300°F.
$1.49
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 5" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$24.99
-
ForgeFit® Stainless Tri-Clamp Quick Disconnect (QD) | Female QD x 1.5" T.C.
Convert 1.5" tri-clamp to Female Quick Disconnect. Perfect for pumping and transferring from or to a tank with tri-clamp connections. Made from 304 stainless steel.
$13.49
-
Stainless Ball Valve - 1/2" - 3 Piece
Heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel. Please note that while we sell plenty of these valves we consider our H602 2-piece ball valve easier to take apart and just as easy to sanitize.
$29.99
-
CO2 Regulator Stem O-Ring (2 Pack)
Silicone regulator stem o-ring. For regulators such as the D1060 & D1065, which have an o-ring located where the regulator stem mates with the CO2 cylinder. Pack of 2.
$3.99
-
KOMOS® 20 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 20 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 20 lb tank because it holds 20 lbs of compressed (liquified) CO2. 20 lbs of CO2 is enough to dispense about 40x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 27.5" T x 8 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$199.99
You have seen 288 out of 504 products