Whether you're a professional winery, or are making small batches in your kitchen, hardware parts will be necessary. We offer dozens of hardware parts, from hose clamps to butterfly valves. Any hardware you'll need to make great wine can be found in the categories below!
Wine Making Hardware
Shop By Collection
-
Brass Hose - Male Hose x 1/2'' Barb
Male Garden Hose Thread on one side, 1/2" OD Barb on the other. Useful for setting up your wort chiller and water filter.
$9.49
-
$0.49
-
CO2 Regulator Stem O-Ring (2 Pack)
Silicone regulator stem o-ring. For regulators such as the D1060 & D1065, which have an o-ring located where the regulator stem mates with the CO2 cylinder. Pack of 2.
$3.99
-
KOMOS® 5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late December. For an in stock 5 lb CO2 tank option, please see our D1050. Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$87.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with black top. 3 pin. 1/4'' barb fitting.
$7.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with gray top. 2 pin. 1/4'' male flare fitting.
$7.99
-
High Temp Silicone Tubing | Reinforced | 3/8" ID
The construction of braided silicone enables the tubing to handle increased pressure applications. Reinforced silicone offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of this tubing allows excellent bend radii and permits installation in restricted spaces without impeding flow. 3/8" inner diameter, 5/8" outer diameter Open mesh polyester braiding incorporated within the wall of silicone tubing Made from FDA-sanctioned ingredients Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -40°F to 392°F (-40°C to 200°C) Odorless, tasteless, and inert Working Pressure: 94 psi Burst Pressure: 275 psi Platinum cured Conforms to FDA CFR 177.2600, NSF
$46.49
-
Stainless - 4 in. T.C. x 2 in. T.C. Concentric Reducer
Stainless steel Tri-Clamp reducer going from 4" T.C. to 2" T.C. Kegland Part Number: KL06156
$54.99
-
ForgeFit® 2 in. Butterfly Valve Gasket
Replacement gasket for the ForgeFit® 2" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.
$24.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 2.5"
EPDM gasket for 2.5" tri-clamp connection. Temperature rated from -30°F to 300°F.
$1.49
-
Stainless Tri-Clamp Sight Glass | 1.5"
Monitor fermentation activity in a stainless steel conical Check flow and liquid clarity during transfers Harvest yeast and store with end caps Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 1.5" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch. 1.5" tri-clamp Approximately 6.25" long Max Pressure: 120 PSI Max Temperature: 300°F Made from 316 stainless steel KegLand Part Number: KL01816
$43.99
-
Brass Hose - Female Hose x 1/2'' fpt Swivel
Female Garden Hose Thread on one side, 1/2" FPT on the other. Useful piece for adapting Quick Disconnects to Wort Chillers or Water Filters.
$3.89
-
Add On Assembly For Gas Manifold
So you had the great foresight to buy our modular gas line manifold and now you are adding a keg. You need gas on that keg. No problem, use our add on assembly to expand your existing manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
$15.49
-
CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with gray top. 2 pin. 1/4'' barb fitting.
$7.99
-
KOMOS® CO2 Regulator to Nitrogen or Argon Tank Adapter | CGA320 Male Thread by CGA580 Male Thread
With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.
$17.99
-
Stepless Hose Clamp - 5/16 in. - 3/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/16" to 3/8" OD tubing (7-10 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06682
$10.99
-
High Temp™ PVC Free Tubing - 1/2 in.
EJ Beverage High Temp tubing is perfect for use on the hot side of your brewing system. When compared with traditional Silicone this tubing is less likely to kink at higher temperatures. It is constructed of TPE (Thermoplastic Elastomer) which is an excellent alternative to high temperature PVC and Silicone. The advantages to this high temperature tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 1/2” ID x 3/4” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 63 psi Working pressure of 21 psi
$16.49
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 120 cm Diameter
Replacement air tubes for variable capacity tanks. 120 cm tube fits 120 cm diameter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$70.99
-
Stainless Tri-Clamp | 2" T.C. x 3/4" BSPP Female
Convert 3/4" BSPP (Straight Thread) fittings to 2" Tri-Clover.
$28.99
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 2"
2" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.5" long.
$92.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 4"
EPDM gasket for 4" tri-clamp connection. Temperature rated from -30°F to 300°F.
$3.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 4"
End cap for 4" tri-clamp fittings. Made from 304 stainless steel.
$26.49
-
ForgeFit® Stainless Tri-Clamp Elbow | 90° | 2"
304-type stainless steel tri-clamp 90° elbow with 2" clamp ends.
$35.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 5" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$24.99
