Wine Making Hardware

96% reduction in oxygen ingress compared to silicone O-rings when measured in a keg! Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings! The result is your beverage staying fresher for longer! Compatible with any ball lock or pin lock corny-style keg with standard lid Upgrade the storage life of your beer by replacing your standard keg lid O-ring with the new Low2 O-ring from KegLand. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Compatible with any ball lock or pin lock corny-style keg with a standard size lid. Not compatible with Megamouth Torpedo Kegs. Low2 O-rings were independently tested by GunnLab, an Australia-based plastic packaging testing laboratory. See below for a printout of the test results. KegLand Part Number: KL03063

Read more less

If you already have an OxyWand™, this connecting kit includes all hardware necessary to connect your OxyWand™ to a disposable oxygen tank.  Control the flow of oxygen with the adjustable oxygen regulator, and gives you piece of mind that sanitary oxygen is feeding your yeast thanks to the inline sanitary oxygen filter.  Four feet of tubing along with 26" of OxyWand™ gives you access to hard to reach fermenters.  Includes: Adjustable Brass Oxygen Regulator Sanitary Inline Oxygen Filter Four Feet of Tubing Instructions for use Please Note: This kit does not include the OxyWand™ itself.  For a complete oxygenation system using the OxyWand™, click here!

Read more less

EJ Beverage High Temp tubing is perfect for use on the hot side of your brewing system.  When compared with traditional Silicone this tubing is less likely to kink at higher temperatures. It is constructed of TPE (Thermoplastic Elastomer), which is an excellent alternative to high temperature PVC and Silicone.  The advantages to this high temperature tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 3/8” ID x 5/8” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 54 psi Working pressure of 18 psi  

Read more less

Reinforced silicone tubing offers higher temperature tolerances and chemical resistance while remaining flexible and easy to handle. Ideal for both cold side and hot side processes and high-pressure applications. Although braided, the tubing remains transparent to allow you to visually inspect the flow of liquids. 1/2" inner diameter 3/4" outer diameter Odorless, tasteless and inert Polyester heat resistant fiber reinforcing braid Good electrical and weatherability properties Resists UV, Ozone, gases, and moisture Working Temperature: -76°F–500°F Working Pressure: 0-150 psi KegLand Part Number: KL25300

Read more less

EVABarrier Draft Tubing in 13 ft. Length is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is early 2025. EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 3 mm (1/8") ID size is perfect for mobile draft applications or home draft systems where only a short beverage line is needed. Lengths of 3.2 ft. per line are all that you'll need for adequate flow resistance. This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 3 mm (1/8") Outer Diameter - 6.35 mm (1/4") PVC, BPA, and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part number: KL25331  

Read more less

This is the female side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Male Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.

Read more less

This is the male side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Female Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.

Read more less

Type A Camlock Fitting. Male Camlock with 1/2" Female BSP. Camlocks are considered by many to be the superior quick connect fitting. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04503

Read more less

Type E Camlock Fitting. Male Camlock with 1/2" Barb (13mm). Camlocks are considered by many to be the superior quick connect fitting. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04527

Read more less

Replace the worn-out gaskets on your stainless quick disconnects. Temperature rated from -40° to 250°F.  

Read more less

304-Polished Stainless tee with 2" tri-clamp connections.

Read more less

A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected. 304-type polished stainless.

Read more less

Convert 3/4" BSP fittings to 2" tri-clamp. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. Kegland Part Number: KL10641  

Read more less

4" x 1.5" tri-clamp reducer. Made from 304 stainless steel.  

Read more less

The BrewBuilt tri-clamp thermometer features a large 3" face for easy reads and 2" probe is less obtrusive in your conical fermenter or T.C. kettle. Dial face reads from 0-220°F and -10-100°C. 3" dial face 2" probe 1.5" T.C. Reads in °F and °C  

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2" tri-clamp fittings. KegLand Part Number: KL03438  

Read more less

3/4" female garden hose thread x 3/4" female garden hose thread. Maximum temperature rating - 195°F.

Read more less

Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.  

Read more less

3/8" female x 1/2" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06576  

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

Read more less

1/2" NPT flat nut

Read more less