Wine Making Hardware

Female 1/2" NPT coupler

Read more less

This fitting has 3/4" Male Garden Hose Thread on one side and both 3/4" MPT and 1/2" FPT on the other.

Read more less

Brass - 1/4'' FPT x 5/16'' barb

Read more less

Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes! The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines. One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI. Need more than 4 gas lines? Check out the 6-Way Duotight Draft Regulator Board. Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Kit Includes: 4-Output Gas Board (4) Duotight In-Line Regulators (4) Duotight Check Valves (4) Duotight Shut Off Valves (if selected above) (3) Duotight Tees (1) Duotight Elbow (15) Rigid Plastic Joiners NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.

Read more less

This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system. Internal Check Valve protects your system from liquid back flow! Made in Germany and assembled in the USA by CMB. Extremly high quality for years of service. NSF Approved for Food Grade Service!

Read more less

These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 7/16" OD tubing (10.5-12.5 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06699  

Read more less

This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.

Read more less

304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 18" long.  

Read more less

These long shanks are suitable to attach to large commercial fermenters and brite tanks with a 1.5" Tri-Clamp Port. Being removable and completely washable it makes this device extremely easy to clean and sanitize before use. Ideally used with the NukaTap Flow Control Faucet with Self-Closing Spring. Please note standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Also compatible with Intertap, Perlick, and other faucets. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989

Read more less

Anvil Brewing Equipment ball valve is made from 304 stainless steel. This robust custom designed kettle drain valve has an integral bulkhead seal that forms an extremely rigid and leak-free joint. The convenient ½” NPT male fitting inside of the kettle allows mounting of nearly any accessory.  Simple to install in any 7/8” hole and will never leak like other weldless connections! Easy to disassemble and clean. Add our dip tube for a complete draining system! When installed, the valve O-Ring will sit in the groove on the back of the valve, on the outside of the kettle.

Read more less

1/4" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06392  

Read more less

This replacement spring is intended for use with our adjustable stainless steeel pressure relief valve - D1832L & D1833L. These units are adjustable from 0 to 30 psi. Example photo shown. The spring you receive may not match the photo exactly.  

Read more less

Includes Pin lock beverage out quick disconnect, line, hand held faucet and two hose clamps. 5 ft of 3/16" line.

Read more less

Includes ball lock gas-in quick disconnect (barb), 5 ft of 1/4" ID tubing, and two hose clamps.

Read more less

This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. 1/4" barb. This QD is for the Bev Out side. See here for the Gas In QD. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL02998

Read more less

Oversized corny keg, great for bigger batches and fermentation Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Set your sights on a brand new Torpedo Keg! The patented, D794,899, sleek all-stainless design represents the pinnacle of quality in ball lock homebrew kegs. With features like welded stainless handles, the ability to stack with fittings in place, amazing quality and a great price we think these kegs will become the standard by which other kegs are measured.    Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.  Stainless Fermenter We've seen a lot our customers having great success using the 6-gallon Torpedo Keg as a stainless steel fermenter or "kegmenter". The extra headroom that this size offers makes it a great option for fermenting 5-gallon batches. We highly recommend using CellarScience Foam Axe if you're fermenting in the keg. Foam Axe will help reduce krausen buildup, cutting down the chance of clogging issues with the ball lock poppets and the PRV in the keg lid. It should also be noted that leaving your finished beer on the leftover trub from fermentation for too long will eventually lead to off-flavors. If it won't be consumed in 2-3 weeks, transfer your beer to a fresh keg using the Torpedo Keg Buoy which will pick up the clearest beer and leave the sediment behind. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions: 27.15" H x 9" D

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   Use the OxyWand™ to infuse oxygen into your must during the start of fermentation to feed yeast and to reduce volatile sulfur compounds (VSC's) with a process called Macro Oxygenation. It is actually very easy to do. Insert the wand, turn on oxygen, and leave it on only while you punch the cap. After three days or when your wine has reached 10% alcohol stop oxygenating. Yeast use the oxygen as a nutrient to produce healthy cell walls which helps to eliminate issues throughout fermentation. Healthy yeast also produce better flavors and produce less Volatile Sulfur Compounds. You can also actually smell the must become fresher and more fruity while oxygenating as VSC's are driven off. Note that in styles like Syrah and Sauvignon Blanc where sulfur compounds are part of the flavor profile you would want to reduce the amount of Macro Oxygenation in frequency and/or duration. Macro Oxygenation also has the benefits of locking up color and rounding tannins.  Want to read more?  See our paper on our website here. Kit Includes: Adjustable brass oxygen regulator Sanitary air filter 4 ft of tubing Instructions 26" long 2 Micron OxyWand™

Read more less

Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest Red is recommended for differentiating your gas lines, but the 5mm ID is the perfect size if longer 10-12 ft. beverage lines are needed Easily identify your gas and beverage lines with color-coded draft tubing. Transparent Red EVABarrier is recommended for gas lines while using LightShield Black for your bev lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. The semi-transparent red outer barrier makes the tubing easy to recognize even with minimal light. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. If you wish to use the tubing for beverage rather than gas, we recommend using 10-12 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line.  With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized.  EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable.  This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42741  

Read more less

Replacement seals for female camlocks. Compatible with Type B, C and D. Comes in pack of 5.

Read more less

2.5" TC Ferrule is used to weld in a TC connection anywhere you need one!  AiSI304 Stainless Steel.

Read more less

Replacement interior gasket for the H661B 2" Butterfly Valve

Read more less

Stainless steel Tri-Clamp reducer with 3" T.C. and 1.5" T.C. connections.

Read more less

Replacement valve seat for plunger-style 1.5" tri-clamp sample valve. Compatible with FF120.  

Read more less