Wine Tank Accessories
Shop By Collection
-
Premium Breathable Silicone Bung for Barrels and Variable Volume Tanks
We recently discovered this premium breathable silicone barrel bung and were immediately impressed with its robust design and features. To start with, the built in tabs really help make bung removal effortless. But where the bung really shines is in its two-piece design. When set to the open position, the bung acts as an airlock and allows the release of CO2 while maintaining a seal against oxygen coming in. This makes the bung ideal for alcoholic or malolactic fermentation in barrels or tanks. When fermentation is over and you no longer want the bung to "breathe" out, you just push the center cap into the bung to create a firm seal and the FE497 becomes a solid stopper! Fits most 30 and 60 gallon barrels as well as the hole in the lid of most Variable Volume tanks! tapers from 1 7/8" to 2 1/4" diameter
$11.99
-
Speidel Orange Airlock (100L - 910L)
Replacement orange airlock for Speidel Variable Volume Tanks. Fits tanks from 100L through 910L in volume.
$15.49
-
Replacement Gauge for WE398 Air Pump for Marchisio Variable Volume Tanks
Replaces a broken gauge on the pump for a variable volume tank lid.
$19.99
-
Inkbird Digital Temperature Controller
The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home wine making. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from wine making uses, this is a great dual relay output temperature controller for cooking (use in a smoker or bbq), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in
$44.99
-
DIN10 Sample Valve for Speidel Tanks
Sample Valve for Speidel Tanks which are equipped with a DIN10 male threaded fitting in the tank wall. Tanks larger than 290L which we order for regular stock during wine season are equipped with a single DIN10 fitting, which comes capped. This fitting will accomodate either this Sample Valve or a DIN10 Thermowell. This item is not intended for use with tanks ordered as part of our PreSeason Sale. If you did not order a GERT or GERSV option then your tank does not have the required DIN10 male fitting on it. We cannot weld this fitting in to your tank wall. However, if you ordered the GERT on your PreSeason Tank then you can replace the Thermowell with this Sample Valve.
$84.99
-
The Temperature Tamer
The Temperature Tamer hangs from the side of a bin or tank and has a built-in temperature controller that monitors the temperature and controls a solenoid valve, allowing coolant or heated water to enter a snake, plate or jacket to maintain your ideal temperature. Theoretically you could be maintaining the temperature of a red wine ferment at 77F in one tank while you cold stabilized a white wine at 30F in the next. The built-in Ranco controller allows for heating or cooling, has a temperature range of -30 to 220F, and will maintain the temperature in a ferment or tank within one degree of your set point. The controller opens and closes the built in electronic solenoid valve to start or stop the flow of coolant. The included thermal sensor can be placed into a thermowell mounted onto a tank or a floating thermowell used with a Macrobin. The unit comes equipped with 1/2" barb outlets for the glycol system, however you can remove those and attach anything you'd like to the 1/2" FPT behind them. We generally like to use Quick Disconnects in these systems, please contact us if you need assistance setting this up properly. An example set-up for cooling macro bins: Using one of our glycol systems run an outgoing and incoming loop of 1/2" line that is always recirculating cold glycol. Wherever you have a bin that needs cooling, tee your Temperature Tamer input into the line coming from your chiller, connect a hose from the Tamer's outlet to the inlet side of your cooling plate, and tee a hose from the cooling plate's outlet into the return line going back to the chiller.
$399.99
-
Inert Gas System for Variable Volume Tanks
Protect your wine from oxidation! If you store wine in a variable volume tank in an environment that is not perfectly temperature controlled and the temperature drops, the wine in the tank will contract. As the wine contracts it creates a vacuum and pulls air into the tank. Even in a temperature controlled environment sampling will pull in small amounts of air. The traditional airlocks used in variable volume lids allow air to enter. If air does not enter the tank through the airlock (say if you had a solid stopper in place of the airlock), the internal vacuum pulls on the entire lid, which often causes a gasket failure. The solution is to replace your airlock with our MoreWine Inert Gas Bleeder. What's Included Our system comes with a tank lid connection, and diaphragm bleeder regulator. Not included is the stainless variable volume tank, high-pressure gas tank, regulator, or tubing to connect to a high-pressure regulator. How to Use As you can see in the picture, the traditional white airlock (on Italian Tanks) or the black screw plastic screw fitting (on our Speidel tanks) is replaced with our white tank connection fitting. The Diaphragm Bleeder Regulator allows for inert gas to be pulled through a one way valve on demand without putting actual pressure on the tank. If the temperature increase and the wine expands the excess pressure also vents out of this Bleeder Regulator. If you plan to use Variable Volume tanks for long term storage we strongly recommend these systems as a safety guard against oxidation. Tips: The correct pressure to set the tank regulator to for use with the WE399 is 2-5 psi. The bleeder valve that is part of this kit has an auto blow off at 10 psi, so having the regulator any higher than that will cause the bleeder valve to vent to the atmosphere and thus drain your gas tank. Note: The inlet is noted with a molded text "CO2" next to the barb fitting.
$344.99
-
Food Grade Propylene Glycol 100% | One Gallon | CellarScience®
Certified Food-Grade Propylene Glycol Inhibited Coolant 100% Concentrate for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. NSF Certified, food-grade inhibited propylene glycol fluid which is intended for use in antifreeze and heat transfer applications where contact with food may occur, such as wineries, micro-breweries, meatpackers, and other food-related industries. Formulated with propylene glycol and an inhibitor system which is effective at preventing rust and corrosion in aluminum, brass, cast iron, copper, solder and steel-containing systems. Operating Range: -50°F to 325°F (-46°C to 163°C) Application: HVAC system freeze/burst/corrosion protection Immersion freezing Cooling liquid foods Packaging carbonated beverages Fermentation cooling Refrigeration coil defrosting Cold room dehumidifying Conveyor roller defrosting Process cooling Process heating Waste heat recovery PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. Always test your heat exchangers with water to check for pinhole leaks. In case of consumption please contact your local Poison Control Center immediately.
$54.99
-
CoolBot Pro Walk-In Cooler Controller | WiFi Enabled | DIY Indoor Cooler | Fermentation Locker | Keg Storage | Wine Cellar
The CoolBot Pro brings you all the great features of the standard CoolBot with added WiFi connectivity, allowing you to monitor and control your cold room from your smartphone through the free mobile app. The CoolBot Pro enables a standard air conditioner to cool a room or space down to 34°F. Easily installs with no tools or electrical knowledge required. The CoolBot Pro comes paired with the Jumper WiFi relay module, which installs on the outside of your cold room. Once the jumper is connected to your wireless network, you can use the free mobile app to control your CoolBot from virtually anywhere with a WiFi connection. Monitor your cold room remotely, adjust temperatures on the fly, or program the app to send you notifications if something is amiss. Whether you're on the go during a busy work week or taking some well-earned R&R, CoolBot Pro has your back! Standard A/C units available from any hardware or appliance store have lots of power, but they are electronically restricted to not go below 60°F. This is because they would freeze up. Commercial refrigeration for walk-in coolers combat freeze with increased surface area on the fins and fans. Instead the CoolBot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60°F and not freeze up. The CoolBot cannot give you 100% of the BTUs listed on your air conditioner, nor is suitable for large brewery or winery walk-ins. But it is perfect for wine cellars, beer storage, fermentation, and many other applications. Easy to install within 30 minutes with no tools or electrical knowledge required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google CoolBot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service. This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running. Residential A/C units are made for efficiency. The CoolBot Pro will also shut down the compressor for a short time when the unit is running at its highest level of inefficiency, as it nears freeze up. Features: Trusted CoolBot technology now with WiFi connectivity and mobile app Allows a standard window air conditioner to cool a room to 34°F Interactive refrigeration for Brewing, Winemaking, Restaurants, Agricultural Purposes & More Mobile app: remote temperature reading and adjustments, receive critical alerts, data storage and reporting Cool Bot Pro and Jumper WiFi relay module included Free mobile app features require WiFi connection Made in the USA Controller Dimensions: 6.5" x 3.4" x 1.1" Jumper Dimensions: 4" x 3.6" x 1.1" Please note: the instruction manual references a paid subscription for the mobile app. The mobile app is now offered for free, with no subscription required.
$419.00
-
BrewBuilt® Chiller Pump Kit
The BrewBuilt Chilling Pump Kit includes everything you need to push glycol or ice water through your chilling coil or jacketed tank. It includes an Inkbird temperature controller to make it easy to hold your temps. Available with either a 800 or 1300 GPH submersible pump. In general we recommend the 800 GPH pump for use with any batch size fermentation less than 10 gallons, and the 1300 GPH pump for any batch size fermentation between 10 gallons and 2 bbl. Kit Includes: Submersible Pump (PMP601 or PMP602) Inkbird Dual Stage Digital Temperature Controller (FE640) 2x 5 ft. lengths of 3/8" SiliconeTubing (H983) 4x Butterfly Hose Clamps Stainless 3/8" Barb x 1/2" MPT
$129.99
-
Stainless Steel Spigot - 3/4 in. BSP
Stainless steel spigot with quarter-turn ball valve. 3/4 in male BSP threads.
$34.99
-
Pair of Valve Stem Gaskets for Marchisio Variable Volume Lid Pump
Use this gasket set to rebuild a leaky variable volume lid pump rather than replacing the whole pump assembly. 2 gaskets are included to replace the pump's valve stem seals.
$8.49
-
Airlock - Plastic - Large for Stainless Steel Tanks
Large plastic airlock for stainless steel variable capacity tanks, or other containers with a thin lid. Features a threaded shaft with back nut and washer. Threaded shaft & locking ring: 1.75" diameter Overall Length: 11" Airlock Length Above Lid: 9"
$14.99
-
NW 10 DIN 11851 Threaded Thermowell for Speidel Tanks - 125 mm Length
Thermowell for Speidel Tanks which are equipped with a DIN10 male threaded fitting in the tank wall. Tanks larger than 220L which we order for regular stock during wine season are equipped with a single DIN10 fitting, which comes capped. This fitting will accomodate either this DIN10 Thermowell or an DIN10 Sample Valve. This item is not intended for use with tanks ordered as part of our PreSeason Sale. If you did not order a GERT or GERSV option then your tank does not have the required DIN10 male fitting on it. We cannot weld this fitting in to your tank wall. However, if you ordered the GERSV on your PreSeason Tank then you can replace the Sample Valve with this Thermowell.
$64.99
-
BrewBuilt® IceMaster Max 4 | Glycol Chiller | 4 Built In Temp Controllers & Pumps | 2600btu | 110V | 8 Gal. Tank Capacity
Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels or barrels. It can be used with any vessel/fermenter/tank/barrel that has a glycol jacket or submersed cooling snake/coil/rod. This chiller features 4 built-in submersible pumps with independent digital temperature controllers, allowing you to control the temperature of 4 separate fermentation or storage vessels at once. Each digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. Compatibility The Max 4 can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following: Speidel - Speidel tanks with optional cooling jackets. Barrels - If you use our barrel snake. This can be particularly attractive for a white wine ferment in a barrel. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, how the tank is insulated, and what the ambient temperature is. Cold stabilizing always requires the most energy and requires well insulated tanks. We are currently experimenting with capacities but can provide this rough guide to get you started. 1 - 60 Gallon Tank or Barrel 2 - 15-30 Gallon Tanks 4 - 5 to 15 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
$1,199.99
-
Replacement Plastic Tank Insert for WE399
Plastic tank insert from the WE399 Bleeder System kit. Sold individually for those who need a replacement part or are planning to build their own version of our WE399 kit.
$19.99
-
Inkbird Digital Temperature Controller (WiFi Enabled)
The ITC-308 WiFi controller allows you to monitor your fermentation temperature from virtually anywhere with an internet connection. From the free companion app, available for iOS and Android devices, you can adjust settings, receive push notifications, and track daily activity. Please note the controller will only work with 2.4 GHz WiFi routers. The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing and wine making. Control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from fermentation uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: WiFi Enabled - requires 2.4 GHz router Free companion app available for iOS and Android devices Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in Power Cord - 4.5 ft. Temp Probe Cord - 6 ft.
$54.99
-
Johnson A421 Digital Temperature Controller
The Johnson digital temperature controller is used to control the temperature of a refrigerator, or similar cooling or heating device. Enter your desired temperature, called set point, and how tightly you want your temperature maintained, called differential, and let the controller do the rest. This is a high quality, ready to go temperature controller that is accurate and easy to use.
$174.99
-
Seal Kit for Speidel Variable Volume Lid Pump
Seal Kit for Speidel Variable Volume Lid Pump (WE397).
$24.99
-
Speidel Black Airlock (1100L and Up)
Replacement black airlock for large Speidel Variable Volume Tanks. Fits tanks 1100L and larger.
$24.99
-
Brewmaster #6.5 Stopper Thermowell
This carboy thermowell is used in conjunction with a Digital Controller to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5, 6, or 6.5 gallon glass carboys or any other similarly sized opening hole. The unit comes with a 15" stainless steel thermowell and a #6.5 stopper. The stopper has two holes measuring 3/8" and 1/4". Measures 14" from the bottom of the stopper to the end of the thermowell. Will not work with Johnson Temperature Controllers (FE600 or FE609) because the probes are too large.
$27.49
-
Stainless DIN10 Cap for Speidel Male Threaded Ports
Used to cap off extra DIN10 ports in your Speidel tanks. Speidel uses the DIN10 fitting for the Thermowell, Sample Valve and Sight Gauge mounts.
$14.99
-
Speidel Tank Thermometer
This is the thermometer that fits into the NW 10 DIN 11851 Threaded Thermowell for Speidel Tanks. Thermowell sold separately. 125mm in Length. Celsius & Fahrenheit Scale. Temperature range -5 to 140°F (-20 to 60°C).
$89.99
-
Analog Temperature Controller
Use this analog unit to control the temperature of a refrigerator, freezer, or air conditioner. It enables you to ferment and store wine at correct temperatures when the ambient room temperature is too warm. Your electrical cooling device plugs into this unit which plugs into the outlet. A remote sensor connected by a small capillary tube monitors temperatures. If the temperature rises above your set point, the cooling device is turned on. The unit features a 4 degree swing to help extend the life of the cooling unit's compressor. For example, if you had it set at 68 degrees, it would turn on at 68 degrees and go to 64 degrees before turning off. The unit has the potential to regulate temperature from 20 to 80 degrees Fahrenheit. The sensor tube can be inserted into a refrigerator or freezer, and still allows the door gasket to seal tight. Temperature Range of 20 to 80F. It will handle 15 amps or 1725 watts at 115 volts AC.
$125.69
-
DIN10 Gasket for Speidel Sample Valve, Thermowell and Sight Gauge Fittings
Replacement gasket for the internal seal on all DIN10 ports on Speidel Tanks. Speidel uses the same DIN10 port on all Sample Valves, Thermometer/Thermowell ports and Sight Gauge ports. Gaskets can be either blue, grey or white depending on the batch from Speidel.
$1.99
-
Replacement Bleeder/Regulator for WE399
Bleeder/Regulator valve from the WE399 kit. Sold individually for those who need a replacement part or are planning to build their own version of our WE399 kit. Note: The inlet is noted with a molded text "CO2" next to the barb fitting. Relevant Specifications Max Inlet Pressure: 10 psi Inlet/Outlet Size: 3/8 in Construction Material: Food Grade rubber and plastic.
$329.99
-
BrewBuilt® IceMaster 100 | Glycol Chiller | 2600btu | 110V | 8 Gal. Tank Capacity
The IceMaster is designed to cool fermentations in small vessels or barrels. It can be used with any vessel/fermenter/tank/barrel that has a glycol jacket or submersed cooling snake/coil/rod. For each vessel you want to cool you will need to buy one of our BrewBuilt Chilling Pump Kit (GLY35). Each Chilling Pump Kit includes a submersible pump that is placed in the cool bath of the IceMaster chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. Compatibility The IceMaster can be used with any fermenter that has a built in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following: Speidel - Speidel tanks with optional cooling jackets. You will need one Glycol Pump Kit for each tank. Barrels - If you use our barrel snake. This can be particularly attractive for a white wine ferment in a barrel. You will need one Glycol Pump Kit for each fermenter. Coolstix - Any glass or PET carboy, Fermonster, or other small vessel that is using a Coolstix to maintain temperatures. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, how the tank is insulated, and what the ambient temperature is. Cold stabilizing always requires the most energy and requires well insulated tanks. We are currently experimenting with capacities but can provide this rough guide to get you started. The maximum number of tanks that can be cooled with the IceMaster is four. 1 - 60 Gallon Tank or Barrel 2 - 15-30 Gallon Tanks 4 - 5 to 15 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 4 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to IceMaster reservoir (should drain freely, no connection necessary) Specifications: Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: r134a Voltage: 110V (3.6 amps) Dimensions: 410mm x 410mm x 660mm Includes 10 stainless bulkheads with 3/8" OD Barbs Wheels included CE Certified Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
$899.99
-
Set of Rubber O-Ring and Plastic Seal for DIN10 Sample Valve
This is a set of two seals. One black rubber o-ring and one white plastic seal for H587.
$19.99
-
Replacement Pump for Marchisio Variable Volume Tanks
Replacement pump assembly for any variable volume fermenter. Includes built-in gauge and line to connect with gasket, but does not include gasket. Made in Italy.
$74.99
-
Sleeve and O-ring for Speidel Variable Volume Tank Lid Gasket - Up To 63 cm Diameter
Compatible with WE369C, WE369E, WE369F.
$0.49
-
Lid Gasket for Speidel FD-Style Sealed Tanks
Factory direct replacement gasket for the top lid on Speidel's small sealed tanks. This gasket fits our tank SKUs beginning with "FD-", "BD-", and tanks BRAU710, 715 and 720. Please note: The gasket you receive may be clear instead of red due to a recent design change by the manufacturer.
$29.99
-
Replacement Probe for Ranco
This is a replacement wire and thermistor for Ranco controllers. It is 8ft in long and is water resistant but not waterproof. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F.
$34.99
-
Glycol System #2
Glycol power packs for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. Features 2300 btu Digital Thermostat Max distance of glycol "out" line - 125 Feet. Vane (Procon) with 1/3 HP Motor 115V Power 11.5 gallon bath capacity Dimensions: 27-1/2"H x 18"W x 29"D Weight: 120 pounds
$2,862.00
-
40cm Gasket for Speidel Tank Top Hatch
Factory replacement gasket for all Speidel 40cm top hatches.
$32.99
-
Stainless Pipe Hanger Clamp | Pipe Support Bracket | 2"
Pipe hanger clamps are quite useful if you want to mount 2" tubing to your wall, whether it be tri-clamp extension tubes for hard piped brewing systems or bulky accessories like activated carbon filters for distilled spirits. Made from 304 stainless steel. DN50 suitable for 2" to 2.25" OD tubing. We recommend purchasing at least two hanger clamps for wall mounting. KegLand Part Number: KL13116
$12.99
-
Glycol System #1
Glycol Chillers for cooling wine fermentations and for use with our PH45 fan unit for cooling rooms. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. If you desire to do cold stabilization with this small chiller you will need to insulate your tanks very well and have sufficient cooling surface area in contact with the wine. A better machine for cold stabilization is our Chilly45 made by Kreyer, featuring 4x the power. Features of Glycol System #1 Digital Thermostat Digital Temperature Controller 2,300 btu/hr Compressor 1/3 hp Vertical-type pump 115V power 5 gallon bath capacity max distance of glycol line is 75 feet 22-1/4" H x 17-3/8" W x 26" D 118 pounds Will cool glycol bath down to approximately 20°F
$1,899.00
-
MKII Temperature Controller
The MKII temperature controller is a great way to control the temperature of your fermentation. Control both heating and cooling with two plugs on the back and create a temperature profile to step up or down the temperature over time. That ability to program in steps can be handy for wine fermentation or even storage if you want to lower or raise slowly. Features: 0.1 degree accuracy Dual plugs for simultaneous heating & cooling -49°F to 248°F temperature range Fully waterproof temperature probe Programmable temperature profiles Kegland Part number: KL01946
$82.99
-
Molded Base with Casters for BRAU710 and FE760
Conveniently move your fermentation tanks / eggs around your facility with this Molded Rolling Base. This unit is designed to work with Speidel 240 l Tanks (BRAU710) as well as the 250 l Fermentegg (FE760). High quality casters allow for easy relocation of tank as necessary for cleaning / general winery work. Adds a bit over 6.25 inches to the height of your vessel.
$309.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 90 cm Diameter
Replacement air tubes for variable capacity tanks. 90 cm tube fits LA Inox 800-1000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$54.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 80 cm Diameter
Replacement air tubes for variable capacity tanks. 80 cm tube fits Marchisio 500-700 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$49.99
-
Stainless Ball Valve - 1/2 in. BSP Full Port
304 grade stainless steel ball valve. Full port for maximum flow rate. 1,000 psi rating for water, oil, or gas. 1/2" BSP female threads at inlet and outlet. KegLand Part Number: KL03681
$16.49
-
Replacement Pump for Speidel Variable Volume Tanks
Stainless steel pump assembly for any variable volume fermenter. Includes built-in gauge and line to connect with gasket, but does not include gasket. Made by Speidel of Germany, this stainless pump is made to a higher quality than comparable replacment pumps made in Italy.
$208.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 50 cm Diameter
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Replacement air tubes for variable capacity tanks. 50 cm tube fits Marchisio 100 - 200 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$44.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 100 cm Diameter
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Replacement air tubes for variable capacity tanks. 100 cm tube fits Marchisio 1000-2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$54.99
-
Sleeve and O-ring for Speidel Variable Volume Tank Lid Gasket - 82 cm Diameter & Above
Compatible with WE369J, WE369M, WE369O, WE369Q, WE369S, WE369T, WE369V, WE369W, WE369X.
$24.99
-
Glycol Chiller - 2 Ton Single Phase
US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market. These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US. These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process. Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 2 tons (24,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* Outdoor rated – install the unit outside your facility if desired 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM @ 30 PSI 230 v Single Phase power (MCA 21.3) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 42"x32.5"x51.5" 350 lb UL Certified Please Note: This unit REQUIRES 230 v Single Phase power (MCA 21.3) and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.
$11,825.00
-
Glycol Chiller - 5 Ton Single Phase
US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market. These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US. These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process. Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 5 tons (60,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* Outdoor rated – install the unit outside your facility if desired 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI 230 v 1 phase power (MCA 40.8) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note: This unit REQUIRES 230 v Single Phase power (MCA 40.8) and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.
$15,280.00
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 125 cm Diameter
Replacement air tubes for variable capacity tanks. 125 cm tube fits LA Inox 2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$69.99
You have seen 48 out of 79 products