Wine Tank Accessories

Use this Solenoid valve to control glycol flow into a fan unit.  These Solenoids should be combined with a Fan Temperature Controller and Connection Cable to set a specific temperature for your fan unit to achieve in your room.  We recommend purchasing a Solenoid Filter with this valve.  The filter will insure that no small particulates can get caught in the valve assembly, potentially damaging the unit. 230 v AC Solenoid with 1" FPT We also sell complete control kits for Kreyer fan units: MR75 & MR135 Control Kit MR210 Control Kit SD35L & SD73L Control Kit

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 5 tons (60,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* Outdoor rated – install the unit outside your facility if desired 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI 230 v 3 phase power Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note:  This unit REQUIRES 230 v Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.  

Read more less

Control the humidity of your cellar to prevent wine barrels from drying out Dry, non-humidified barrels will draw liquid to the outer surface where it evaporates, leading to significant product loss Can operate in environments as low as 34°F, making it ideal for cold rooms and storage halls Compact, stand-alone unit can be suspended from or mounted to a wall 9,900 cubic feet per hour air flow Made in Germany by Kreyer Humidity control in wine cellars plays a major role during the production, maturation and storage of wine and other beverages in wooden barrels. Wine barrels safe-guard the main asset of a winery – the wine itself. The wooden walls of dry, non-humidified barrels will draw liquid from inside it up through the small crevices to the outer surface where it evaporates. Over time, this leads to a significant amount of product loss. For example, a 225L wine barrel can lose 10-15% of the wine volume over one year. A professional humidification of the barrel room allows the barrel wood to absorb water-vapor, the crevices fill out and loss of wine is prevented. A well-kept barrel room is therefore cool, usually around 57-60°F and humidified at about 75% - 80% rH. As with every aspect of winemaking, attention and professional equipment are required. Low humidification may allow the wood to dehydrate and wine will evaporate through it, while overly high humidity can lead to mold and fungus.    The centrifugal humidifier HumiFix is equipped with a spinning disk that vaporizes water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling a room at the same time. The unit can work either connected to your main water supply with inline cartridge filtration or more ideally to an RO unit. The HumiFix can work at low temperatures (down to 34°F), which is ideal for installation in cold rooms and storage halls.   Features: Stand-alone unit Easy installation and handling Compact construction Wall or suspended mounting Specifications: Water Output: 6.5 L/h (1.69 Gal/h) Air Flow: 280 m³/h Power: 230 watts Power Connection: 110V/1Ph/60Hz Dimensions: 24" L x 20" W x 22.25" H Empty Weight: 40 lbs Please note: this unit comes with a bare cord so it can be hard wired to a controller. Otherwise we recommend attaching a 110V male plug and using it with the Inkbird Digital Humidity Controller.  

Read more less

Control the humidity of your cellar to prevent wine barrels from drying out Dry, non-humidified barrels will draw liquid to the outer surface where it evaporates, leading to significant product loss Can operate in environments as low as 34°F, making it ideal for cold rooms and storage halls Compact, stand-alone unit can be suspended from or mounted to a wall 2,800 cubic feet per hour air flow Made in Germany by Kreyer Humidity control in wine cellars plays a major role during the production, maturation and storage of wine and other beverages in wooden barrels. Wine barrels safe-guard the main asset of a winery – the wine itself. The wooden walls of dry, non-humidified barrels will draw liquid from inside it up through the small crevices to the outer surface where it evaporates. Over time, this leads to a significant amount of product loss. For example, a 225L wine barrel can lose 10-15% of the wine volume over one year. A professional humidification of the barrel room allows the barrel wood to absorb water-vapor, the crevices fill out and loss of wine is prevented. A well-kept barrel room is therefore cool, usually around 57-60°F and humidified at about 75% - 80% rH. As with every aspect of winemaking, attention and professional equipment are required. Low humidification may allow the wood to dehydrate and wine will evaporate through it, while overly high humidity can lead to mold and fungus.    The centrifugal humidifier HumiFix is equipped with a spinning disk that vaporizes water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling a room at the same time. The unit can work either connected to your main water supply with inline cartridge filtration or more ideally to an RO unit. The HumiFix can work at low temperatures (down to 34°F), which is ideal for installation in cold rooms and storage halls.   Features: Stand-alone unit Easy installation and handling Compact construction Wall or suspended mounting Specifications: Water Output: 1.0 L/h (0.26 Gal/h) Air Flow: 80 m³/h Power: 31 watts Power Connection: 110V/1Ph/60Hz Dimensions: 15.5" L x 12" W x 15.5" H Empty Weight: 10 lbs Please note: this unit comes with a bare cord so it can be hard wired to a controller. Otherwise we recommend attaching a 110V male plug and using it with the Inkbird Digital Humidity Controller.  

Read more less

This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time. The color screen clearly displays temperature, graph of future and past temperature settings and makes it much easier to perform profile temperature steps. The RAPT app can be downloaded from the Apple App Store for iPhone or Google Play for Android, or you can access the RAPT portal from any web browser here. This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. For untethered probe readings, switch the temp reference to the RAPT Bluetooth Thermometer. PID Included This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation. Temperature Range The temperature range of this device will enable you to control devices from -4°F to 248°F (-20°C to 120°C).  Various Mounting Options This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brew system. Simply unscrew the mounting plate and switch the mounting to your preferred orientation. RAPT WiFi Compatible This product will connect with the RAPT portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running. Specs: WiFi & Bluetooth Enabled Free companion app available for iOS or Android devices Customize temp profiles and view logged data from the RAPT portal via web browser Simple plug and play design with LCD display Adjustable heating/cooling differentials Temp Range: -4–248°F (-20–120°C). Probe Relay Length: 6.5 ft. (2 m) Probe Diameter: 0.15" (4 mm) 110-120V 15A KegLand Part Number: KL26055  

Read more less

Conveniently move your fermentation tank around your facility with this Molded Rolling Base.  This unit is designed to work with Speidel FD 60 L and 120 L Fermentation Tanks*.  High quality casters allow for easy relocation of tank as necessary for cleaning / general winery work. Adds about 6 inches to the height of your vessel. *Does not fit stainless 60 L conical fermentation tank - BRAU700

Read more less

Factory direct replacement gasket for the 40x53cm rectangular manway ordered with some Speidel tanks.

Read more less

Factory direct replacement gasket for the molded, oval manway/racking door which is fitted standard to Speidel sealed tanks.

Read more less

Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 140cm - 160cm in diameter. Installs two feet per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up. Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.

Read more less

Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 100cm - 120cm in diameter. Installs one foot per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up. Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.

Read more less