Air Driven Wine Pump

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid July.     Self-priming stainless steel impeller pump with for moving wine or beer Cast stainless pump head with 1.5" tri-clamp connections On/off switch for easy operation 11 gallons per minute reversible flow rate Made in Italy by EnoItalia Centrifugal pump with cast stainless head. 1.5" T.C. inlet and outlet.  Self-Priming. Reversible direction. Stainless impeller.  Best used for transferring wine or beer between tanks.   Specifications 11 GPM Max Pressure: 15.9 PSI (1.1 BAR) 1.5" Tri-clamp fittings Single Speed 1400RPM 194°F Max Temp Rating 14 LBS 12.6"x9.5"x7" 110V Note: Because this product is manufactured in Europe, it will come with a European plug. You will need to re-wire for use in the USA. Please see our European Equipment Wiring Colors guide for instructions on how to convert to a domestic plug.  

Read more less

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it.  The 2 wheeled cart can make it into tight places in the winery, and scoots out of the way when not needed.  With the included SS Bypass, you can reduce flow rates up to 25%.  SS head and cart mean easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Although the Euro 30 is self-priming, the pump should never be run dry. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery SS Bypass for reducing flow SS head w/ flexible impeller Light assembly required - pump is separate from cart in box 220v bare cord  - You will need to wire on the appropriate 220v plug 

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Pre-wired with 110V plug Made in Italy by EnoItalia This version of the Italian-made Euro 20 features a pre-wired 110V plug. Unlike the 220V model, this pump is ready for use and does not require a plug to be wired to a bare cord. The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 110V single phase Pre-Wired Plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller    

Read more less

Stainless steel pump with food-grade plastic impeller with for moving wine or beer 1.5" tri-clamp connections 13 gallons per minute flow rate Made in Italy by Marchisio This pump features a stainless body, housing, and bracket. It utilizes an impeller made from food-grade plastic. The impeller does not push air by itself so to prime it you unthread the priming nut on top of the filter housing and fill with water or wine. Comes with 1.5" T.C.  inlet and outlet. Has a .8 hp motor and moves 13 gallons per minute with no head. Will pump up to a height of 70'. 110v. Overall dimensions are 14.5" L x 7"W x 7"H. Weighs 15.4 lbs. Optional by-pass can be installed to restrict flow up to 25%.  This pump can handle some small solid particulate, such as grain particles, and is food grade up to 113° F. Please note the instruction manual references 230V for the voltage, but these pumps are custom configured by the manufacturer in 110V.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 220v bare cord  - You will need to wire on the appropriate 220v plug  Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.    

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 14.4 g.p.m. (54.5 l.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gallons (0.15 lit.) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75.0 db(A) Dimensions .................................... 10" W x 10 7/8" H x 6 23/32" D

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 10.6 g.p.m. (40.1 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.022 gal (0.083 lit) Maximum Particle Size .................... 1/16" dia. (1.6 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 72.7 db(A) Dimensions .................................... 7 31/32" W x 9 5/16" H x 5 23/32" D

Read more less

Used – Refurbished This unit is used. It has been restored to working order. It will have cosmetic defects and show signs of previous use. It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.   The perfect pump for moving wine from one vessel to the other.  These Flexible Impeller Pumps are controlled by a Variable Frequency Drive, allowing for wine or juice transfers as fast as 20 gallons per minute, down to a complete stop.  A sturdy Stainless Steel cart with nylon wheels allows for easy manueverability in the winery, and a lifetime of use.  The pump can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. We worked for a year to develop this particular pump with Enoitalia of Italy.  The value and price are really amazing. So much that we stopped making our own line of Chunky Pumps at the end of 2016.  Enoitalia has been making pumps for decades and while they are excellent at destemmer crushers and other equipment, pumps are their core specialty.  We will support the pump in the USA with common spare parts but we also have the backing and support of Enoitalia if anything was to go wrong.       Stainless steel head with flexible rubber impeller     Remote control with 40' cord included     VFD allows for flow rate from 0 to 19.8 gpm     1.5" Tri-Clover inlet and outlet     220 v single phase Input voltage required (6.5 amp draw)     Recommended temperature range: 40 - 150°F (5 - 65°C)     Handy SS trolley cart for easy movement around the winery     1.5 HP Motor     Self-priming Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug. Please Note: This pump will NOT come with fittings. It will have 1.5" Tri Clamp ferrules, and the appropriate fittings can be chosen from the "You Might Also Need" section below.  

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 12 g.p.m. (45.4 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gal (0.15 lit) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75 db(A) Dimensions .................................... 7 11/16" W x 11 21/32" H x 6 23/32" D

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 120 p.s.i.g. (8.3 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 120 p.s.i.g. (8.3 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 47 g.p.m. (177.9 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.17 gal (0.64 lit) Maximum Particle Size .................... 1/8" dia. (3.2 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 79.7 db(A) Dimensions .................................... 14 7/32" W x 14 27/32" H x 11 1/32" D

Read more less

Condition: Used - Good This unit is used. It shows wear from use but is in good condition and works perfectly. It may have cosmetic defects or show other signs of previous use.  It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.   The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor Food grade to 150 degrees Fahrenheit SS head w/ Flexible Impeller

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 10.6 g.p.m. (40.1 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.022 gal (0.083 lit) Maximum Particle Size .................... 1/16" dia. (1.6 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 72.7 db(A) Dimensions .................................... 7 31/32" W x 9 5/16" H x 5 23/32" D

Read more less

Self-priming wine pump with variable flow control from 0 to 20 gallons per minute Flexible rubber impeller gently pushes wine Stainless steel pump head with 1.5" tri-clamp connections Remote control operation with 40 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The perfect pump for moving wine from one vessel to the other.  These Flexible Impeller Pumps are controlled by a Variable Frequency Drive, allowing for wine or juice transfers as fast as 20 gallons per minute, down to a complete stop.  A sturdy Stainless Steel cart with nylon wheels allows for easy manueverability in the winery, and a lifetime of use.  The pump can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. We worked for a year to develop this particular pump with Enoitalia of Italy.  The value and price are really amazing. So much that we stopped making our own line of Chunky Pumps at the end of 2016.  Enoitalia has been making pumps for decades and while they are excellent at destemmer crushers and other equipment, pumps are their core specialty.  We will support the pump in the USA with common spare parts but we also have the backing and support of Enoitalia if anything was to go wrong. Although the Euro 30 is self-priming, the pump should never be run dry. Stainless steel head with flexible rubber impeller Remote control with 40' cord  included VFD allows for flow rate from 0 to 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input voltage required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery The pump is reversible and can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. Please Note: This pump will NOT come with fittings.   It will have 1.5" Tri Clamp ferrules, and the appropriate fittings can be chosen from YMANs below.

Read more less

Heavy-duty, elliptical rotor, roll-in crush pad pump Ideal pump for moving must or whole berries with little to no liquid Stainless steel pump body with 3" tri-clamp connections Hinged stainless door for inspection and cleaning Made in Italy by EnoItalia Gamma pumps are heavy duty, elliptical rotor, stainless steel pumps designed to move must from your destemmer to your fermentation tanks or bins. They are often referred to as Roll-in Crush Pad Pumps because they are on wheels and slide directly under your destemmer crusher.  While rubber impeller pumps can be made to work for this purpose impeller pumps are not as good in situations where there is very little liquid. Examples would be when you are trying to process whole berries or processing very small berry cabernet sauvignon. Gamma pumps are also softer on the fruit than an impeller pump.  Elliptical Crush pad pumps are professional solutions. The Gamma 80 works with either our Jolly40 or Jolly60 while the Gamma180 works with the Jolly100.  Features: Stainless steel pump body Stainless Receiving hopper with screw 5.5 HP/4kW Motor Requires 3 phase, 220v, 60 Hz Power Up to 25,000 lbs/12,000kg pumped per hour Max Pressure: 21.7 PSI (1.5 BAR) Shaft speed: 47/58 rpm 3 in Tri Clamp connection fitting Up to 15 ft / 4.5 m discharge height Up to 90 ft / 27.4 m discharge distance Hinged stainless door for inspection, cleaning Automatic refillable lubricator Please Note:  This unit REQUIRES 220V Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both styles feature a food grade Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator   Construction Of H367E: Specifications: Stainless Steel outer Body Black Polypropylene Center Stainless Steel Hardware Stainless Steel Seats Santoprene Ball & Diaphragm Maximum Air Inlet Pressure .............. 120 p.s.i.g. (8.3 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 120 p.s.i.g. (8.3 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 52.2 g.p.m. (197.6 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.232 gal (0.88 lit) Maximum Particle Size .................... 1/8" dia. (3.2 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 80.6 db(A) Dimensions .................................... 12 11/32" W x 12 7/16" H x 11 3/32" D

Read more less