Products
-
1/4 in. Plastic Push Together Quick Disconnect (QD) Assembly
Not for use under pressure. Can be used for gas tubing like in our MT140 SO2 Test Kit or for splicing racking tubing up to 3/8" ID.
$7.99
-
1/4" Aluminum Gas Manifold
Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554
$26.49 - $54.99
-
1/4" Nut & 5/16 Barb
This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached. Stainless Steel barb with a chrome plated Brass nut.
$4.99
-
1/4" Tailpiece, Hex Nut, and Gasket
Perfect addition when purchasing a new sanke style keg coupler or tap. New taps typically come with the correct fittings for your gas line but not your beverage line. These are those fittings! Used to connect 3/16" or 1/4" beer line. To connect 3/16" beer line tubing it is helpful to heat the tubing end in hot water.
$6.29
-
1/8 in. Adapter for 20 in. Sight Glass
1/8 in. Adapter for 20 in. Sight Glass.
$6.99 $5.49
-
10 gal | Ss Brew Kettle Brewmaster Edition
With the Ss Brew Kettle Brewmaster Edition we've taken what we've learned designing and manufacturing pro brewing equipment and scaled it down for home brewers. With features such as a rotatable racking arm, and a sight glass integrated into the 3-piece ball valve, allow the brewer to monitor and minimize trub pickup during knockout. In addition, the all new dish bottom with integrated fire box is designed to increase surface area by 50% and channel the flow of heat for faster boiling times. Coupled with a tangential inlet for more effective whirlpool action and trub collection. All TC fittings are fully sanitary welded, and like all of our brewing equipment, built with the highest quality 304 stainless steel and craftsmanship available on the market today.
$359.00
-
10 gal | Ss Brite Tank
Ss 10 gal Brite Tank Note: This tank does not come with an FTSs package. These are not sold individually and must be purchased alongside the tank as FE860A. Features: Professional dished bottom design Large center drain allows less sediment through than standard dip tube Carbonation stone LCD thermometer and thermowell 6" Tri Clamp lid Custom Ss butterfly valve Sight glass and exterior etched volume markers Pressure gauge and relief valve Rated up to 15 psi 25" Height x 15" Width x 18" Depth (Including valve) 304 Stainless Steel
$549.00
-
10 PSI Spring for D1830
10 PSI Spring for D1830
$1.50
-
100 ml. Plastic Graduated Cylinder
Measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work.
$7.69
-
1000L (264G) Speidel Black Eye Fermentation Egg
Speidel has developed a stainless steel fermenting egg that combines the advantages of the egg shape with the advantages of a stainless steel tank and a unique design. The Black Eye looks like a space satellite from the outside and provides a gentle and well controllable fermentation inside. Due to its unique shape, the yeast can circulate smoothly during the fermentation phase. In science it is assumed that this free circulation is an advantage for the fermentation process and thus for the entire aroma spectrum. Thanks to the perfect welding seams and the highly smooth inner walls, the fermenting chamber is also very easy to clean. Tank shell and tank bottom made of AISI304 stainless steel, surface IIId (2R), marbled outside Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside DOM NW400 centered in the middle og the tank top with flap lid with venting nozzle 2''TC Free-standing base tank on three welded-on legs Sampling - Weld-on thread NW10 DIN11851 with sealing cap (for the installation of sampling tap) Racking Outlet - Weld-on 1.5''TC Cooling Jacket - Laser-welded double jacket for cooling with two 1" BSP male threaded ports Temperature Measurement - Weld-on thread NW10 DIN11851 Bottom Outlet - Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with 1.5''TC
$11,499.99
-
1000L (264G) Speidel Black Eye Fermentation Egg with 2 in. T.C. Racking and Dump Ports
Speidel has developed a stainless steel fermenting egg that combines the advantages of the egg shape with the advantages of a stainless steel tank and a unique design. The Black Eye looks like a space satellite from the outside and provides a gentle and well controllable fermentation inside. Due to its unique shape, the yeast can circulate smoothly during the fermentation phase. In science it is assumed that this free circulation is an advantage for the fermentation process and thus for the entire aroma spectrum. Thanks to the perfect welding seams and the highly smooth inner walls, the fermenting chamber is also very easy to clean. Tank shell and tank bottom made of AISI304 stainless steel, surface IIId (2R), marbled outside Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside DOM NW400 centered in the middle og the tank top with flap lid with venting nozzle 2''TC Free-standing base tank on three welded-on legs Sampling - Weld-on thread NW10 DIN11851 with sealing cap (for the installation of sampling tap) Racking Outlet - Weld-on 2''TC Cooling Jacket - Laser-welded double jacket for cooling with two 1" BSP male threaded ports Temperature Measurement - Weld-on thread NW10 DIN11851 Bottom Outlet - Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with 2''TC
$11,999.99
-
1000L (265G) Grant & Mixing Tank
Speidel's RO-Z style grant/mixing tank is an extremely handy tool in any winery. The open top, 45° mixing port, and total drain outlet make mixing additions into larger tanks a snap - insert your mixer in the 45° port and position the mixing tank under the racking port of your larger tank. Run wine into the mixing tank with the mixer running, pour in your tartaric acid, sugar, bentonite, etc.; and pump out of the drain port to return the wine to the tank. Key Features Heavy duty nylon casters make the tank easy to move around the winery Two fixed casters and two swivelling casters with brakes 45° mixing port is reinforced and strong enough to support a mixer without an additional stand Variable Volume tank lid available (sold separately) Sack support rack available (sold separately) Click Here for more information on the key features of all Speidel Tanks.
$3,999.99
-
1000L Sealed Stackable Transport Tank
These Speidel Sealed Transport tanks are the perfect solution for winemakers who have, well, wine to transport! The modular, stackable design makes them easy to store and useful around the winery when not being used for transport. The 1000L capacity means they can be picked up with a standard forklift when full, and the fact that they fit the footprint of a standard pallet means they will fit in the bed of most full-sized pickup trucks. Key Features Sealed top with welded on D-Tabs for lifting the tank 40cm hinged top hatch with 2''TC vent neck with sealing cap. Molded, fully draining tank bottom with 2''TC. Stainless steel frame, accessible from four sides by forklift. Maximum stack of 3 tanks when full Click Here for more information on the key features of all Speidel Tanks.
$6,499.99
-
1100L Variable Volume/Conical Bottom Red Fermentation Tank w/ Manway
The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
$4,999.99
-
110mm Plastic Lid for Wide Mouth Jars
110 mm plastic lid fits our 1/2 gallon and 1 gallon plastic jars, and 1 gallon glass wide mouth jars. Sold individually, or in cases of 720.
$1.49
-
12 in Wrap Around Drip Tray
Never lose a drop with this wrap around drip tray that hugs the tower to catch all of those stray drops. Fits all of the towers we sell! Made from stainless steel. Dimensions: 7 in wide x 12 in long x 0.75 in deep (up to 4.33 in tower diameter) Kegland Part number: KL01427
$38.49
-
14 Gallon FastFerment Collection Ball
Collection ball for the 14 gallon FastFerment. Made from food grade HDPE and the volume is 40.6 oz (1200 ml)
$24.49
-
15.5 Gallon Sanke Keg Pallet of 24 | 1/2 bbl | Full-Size Keg | US D-Style Micromatic Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)
$3,229.99
-
15.5 Gallon Sanke Keg | 1/2 bbl | Full-Size Keg | US D-Style Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)
$144.99
-
1600L Variable Volume/Conical Bottom Red Fermentation Tank w/ Manway
The FO-M tank from Speidel is very similar to the the standard FO style variable volume storage tank. The FO-M tank, however, has been specially altered to make it more useful as a fermentation tank, and comes pre-fitted with the most standard features equipped on tanks used for red fermentations. And they have the same degree of flexibility and customization available as the standard FO style tank, but offer an easy starting point and cost savings for tanks destined for red fermentation. And don't miss out on Spediel's Mobile Must Plunger, which makes punch downs fast, easy and automatic! Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L Tank is equipped with rectangular manway for must discharge. Legs elevated to 52cm height for easier must discharge. Can be extended up to 80cm to accommodate a macro bin under the manway. Bottom drain is rotated to just in front of the left tank leg so it's out of the way of must receptacle. 1,100L & 1,600L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks include a lifting arm. Mobile, forkliftable Pneumatic Must Plunger available to go with these tanks! Click Here for more information on the key features of all Speidel Tanks. Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
$5,499.99
-
16g Threaded CO2 Cartridge | Pack of 6
16g threaded CO2 cartridges that work great with the KegLand Core 360 Mini CO2 Regulator or the Duotight Mini CO2 Regulator. Comes in a package of 6 cartridges. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
$10.49
-
16g Unthreaded CO2 Cartridge | Pack of 6
Unthreaded cartridges can be used with handheld CO2 injectors, the 128 oz Growlerwerks uKeg, as well as some mini keg systems. Unthreaded cartridges are not compatible with our mini CO2 regulators.
$11.99
-
2 Gallon Food Grade Bucket
A little bucket with a lot of uses. An ideal size bucket fermenter for doing 1 gallon fermentations. Ideal for your next small batch of fruit wine. Used to scoop fermented grapes out of the your fermenter and into the press. Place under a press to collect run off. This list goes on! Wide opening allows for easy cleaning. Lid sold separately. 9-1/4" H x 9-1/2" D (without lid) 9-7/16" H x 9-15/16" D (with lid)
$7.99
-
2" Oxygenation Assembly for Conical Fermenters with Quick Disconnect (QD) set
2 inch T.C. end cap for our Ultimate Yeast Harvester for Conical Fermenters. This is welded up with a 1/4" fpt and equipped with a Gas Quick Disconnect Set. The other side has a .5 micron Oxygenation stone for cleanly oxygenating your beer during fermentation.
$69.99
