1/4" Nut & 5/16 Barb

Name: 1/4" Nut & 5/16 Barb
Rating: 4.89 (9 reviews)

Cornelius Kegs & Parts

1/4" Nut & 5/16 Barb

Product form

SKU: KEG640

$4.99

Calculating shipping time...

Free Shipping*

Paid Shipping

Drop Ship

Discount Exclusion

Freight Only

Pre Order

WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Important Warnings & Shipping Info +

Free Shipping: Fast & Free Shipping over $79

Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.

Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.

Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts.

Freight Shipping: This item ships freight only.

Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.

Shipping Weight: 0.2 lb

5 stars: 8 (89%)
4 stars: 1 (11%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

It does exactly what you were expected to do no problems here

worked as needed on gas ball lock connector

Works great

Does what is need for it to do

Good product

Works as intended. Will buy again.

Works fine needs just the right torque.

time and effort saver!

In the past I used the barbed gas/beverage ball lock connects for my kegs. I recently switched to threaded (flared). Using these (item # KEG640) as the female end on the gas tubing makes it so much faster and easier when filling a keg. I can hook the beverage ball lock connect to the gas tube to purge the keg so much easier now! I highly recommend!

works great for my keg setup

No leaks. No problems.

Nice for gas tubing

Versatile and leak free. These are great!

No more cutting tubing

Like a poor man's quick disconnect. These works great when you want to unscrew your tube from a ball lock versus removing a clamp and cutting the tubing. Easy to install and clean too. My whole system is using these now.

Does this work with the stainless steel quick disconnect I just bought here at More Beer? Thx.

MoreWine

If you are referring to the Torpedo Ball Lock Quick Disconnect or similar item yes it works.

MoreWine

If it has a 1/4" male threaded connector it would work.

MoreWine

This is for connecting a 5/16 (ID) hose to a Ball Lock fitting. Not your typical quick disconnect. There is a difference.

For the barb used in this set does the recommended tubing size of 5/16" refer to the ID or OD of the tube? Which item# would you recommend for the tubing?

MoreWine

Inner diameter

MoreWine

It refers to a 5/16" inner diameter. There are a variety of options that will work all with their respective advantages. You can find them all on our website typing "5/16" into the search bar. The antimicrobial tubing is my favorite for a home kegerator.

Here comes a dumb one so brace yourself... can I (or should I) silver solder a stainless steel pipe onto this?

MoreWine

Hi Eric - I'm not sure what the exact application would be to solder a SS pipe onto the flare fitting. Would it be possible to explain a bit further?

Will your Flare Fitting - 1/4 in. Swivel Nut (Stainless Steel) work with the 5/16 barb this setup comes with?

MoreWine

Hi Jason - Surprisingly these will NOT fit together. KEG601 is designed for a 1/4" barb.

Do I need to purchase a flare fitting washer with this set?

MoreWine

Hi so the flare fitting is threaded to screw the 1/4" Nut & 5/16 Barb onto between a barrier (metal?)

MoreWine

You need a flare fitting washer for every flare connection you make. Also get lots of extras since they're tiny and easy to lose in a drain etc.

MoreWine

Only if you are connecting metal to metal - such as a male flare on a manifold or regulator. If you are using it to connect to a beer or gas ball lock quick disconnect then those disconnects have a bit of plastic built in and you don't need to use the nylon flare washer.

MoreWine

I would recommend purchasing the fitting as an extra protection from losing CO2. Very frustrating when everything is hooked up and you are losing gas that this fitting might prevent.

EnoItalia Motorized Crusher Destemmer | Stainless Steel | Self-Adjusting Rubber Rollers | 110V

Speidel Variable Volume Tank | Laser-Welded | Stainless Steel | 110L

Vinmetrica SC-300 | Complete Wine Testing Kit | Sulfite (SO2), pH & Titratable Acidity (TA) Analyzer Kit

Lallemand Fermaid O | Yeast Nutrient | Organic Nitrogen | No Added DAP

1/4" Nut & 5/16 Barb

1/4" Nut & 5/16 Barb

Recently viewed products

Customer Reviews

1/4" Nut & 5/16 Barb