Products
-
Stand Up Bladders with Tamper Sealed Tap | 5L | 1.3 Gallon | Pack of 5
Stand-Up Design: The bladder's thick, rigid material allows it to stand upright, making it easy to fill with your favorite drinks and dispense them effortlessly Keeps Beverages Fresh: A durable, multilayer film with an oxygen-blocking foil layer and a PE interior prevents oxidation and moisture loss, preserving the freshness and flavor of your beverages Versatile for Many Drinks: The KegLand bladder is designed to hold a variety of non-carbonated beverages, from wine and spirits to coffee and cocktails, offering a simple solution for serving any of your favorite drinks Serve your favorite non-carbonated drinks effortlessly with the KegLand 5L Stand Up Bladder. This versatile bladder is perfect for dispensing a wide range of beverages, including: Wine Spirits and Liqueurs Coffee Non-carbonated cocktails This bladder is made from a durable, multilayer film. The interior layer of PE and an exterior foil (Mylar) layer work together to completely block oxygen and prevent moisture loss, keeping your drinks fresh. The material is also thick and rigid, allowing the bladder to stand upright on its own for easy filling and dispensing. Please Note: This product is not suitable for beverages with an alcohol by volume (ABV) higher than 22%. A different, higher-density PE internal liner is required for higher ABV products. KegLand Part Number: KL41287
$15.99
-
Standard Stainless Spout | Intertap® | NukaTap®
Standard stainless steel spout replacement for intertap faucets
$6.59 $4.99
-
Star Anise (Whole)
Star Anise, also called Chinese Star Anise and Star Aniseed, is a spice obtained from the fruits of an Asian shrub. It is so-named because the seed pods are star-shaped and contain a highly aromatic compound called anethole, which is responsible for the anise-like flavor of the spice.
$4.99
-
stavin American Oak Cubes | Heavy Toast
Heavy Toast for Red Wines where you want the rich, carmelized, carbonized oak flavor. Nice to add as a small addition after having added your regular addition of medium or medium plus oak. Manufactured by StaVin. Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor. Our cubes are fires toasted and cut by Stavin, a leading supplier of high-quality oak alternatives to top commercial wineries. Click here for a PDF of the MoreWine Oak Cube Dosages.
$7.99
-
Stavin American Oak Cubes | Medium Plus Toast
Medium Plus toast cubes manufactured by StaVin. Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor. Our cubes are fires toasted and cut by Stavin, a leading supplier of high-quality oak alternatives to top commercial wineries. Click here for a PDF of the MoreWine Oak Cube Dosages.
$4.69
-
Stavin French Oak Cubes | Heavy Toast
Heavy Toast for Red Wines where you want the rich, carmelized, carbonized oak flavor. Nice to add as a small addition after having added your regular addition of medium or medium plus oak. Manufactured by StaVin. Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor. Our cubes are fires toasted and cut by Stavin, a leading supplier of high-quality oak alternatives to top commercial wineries.
$9.99
-
Stavin French Oak Cubes | Medium Plus Toast
Medium Plus toast cubes manufactured by StaVin. Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor.
$9.99
-
Stavin French Oak Cubes | Medium Toast
Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, thereby contributing a harsh, flat oak flavor. Our cubes are fire toasted and cut by Stavin, a leading supplier of high-quality oak alternatives to top commercial wineries.
$9.99
-
Stavin Hungarian Oak Cubes | Medium Plus Toast
Medium Plus toast cubes manufactured by StaVin. Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor. Click here for a PDF of the MoreWine Oak Cube Dosages.
$4.69
-
Stavin Oak Barrel Replica - French (Med. Plus Toast)
The Oak Barrel Replica is a simple and perfect way to impart 100% new barrel flavor into wine stored in a neutral oak barrel. 30 staves are tethered into 10 sections, which allows modification and complete control. If you want 50% of new barrel extraction spread over two barrels, simply cut the Replica in half. The contact time is 3 months minimum and up to 18 months of useful life. Toast level is Medium Plus. Comes with eye hook for insertion to a bung. Stavin recommends a wood or silicone bung.
$224.99
-
Steam Condenser Set | 2 in. T.C. | BrewZilla | DigiBoil
Made from high quality 304 Stainless Steel, this condenser lid is ideal for apartment or basement brewers who struggle managing steam and condensation during brewday. Easy to use and assemble, can be used with a wide range of configurations. Comes with removable end cap for adding hops, yeast nutrient or whirlfloc during the boil. (Use gloves, it will be hot!). This steam condenser set can be compatible with the 35L or 65L BrewZilla/DigiBoil with the stainless distillation lid and 2 Inch Bulkhead. This unit can allow brewing indoors without that pesky sticky steam gumming up your freshly painted interior! The End Cap can be removed for brewing salts/hops and other brewing essentials to be added during the boil. Please note hot steam through this port can lead to serious scalding, please use heatproof gloves. With the new Pro Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions. Not only will you get to the boil faster, but you will use less power overall to maintain a rolling boil as there will be less area for the heat to escape. No need to install inside a kitchen, or in the garage with a special range hood. Simply attach this to the Condenser Lid and run your kitchen tap or garden hose to the Duotight-compatible inlet. You don't not need super-fast flow rate to cool boiling steam into liquid. Different to distillation where you require the distillate to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough to form a liquid! Pretty simple. Eco-Friendly option if you have the means to save/collect the coolant water. Can be re-used on the garden or for cleaning later on. Please note the water discharging will be very hot! The Spray head can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely. DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode. DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely. You Will Also Need: Tri-Clamp Distillation Lid OR Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil With 2" T.C. Weldless Bulkhead (H707) OR Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil 35L Lid connects directly 65L Lid requires 4" x 2" TC Reducer 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Monotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately NOTE: The kit does not include the Monotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm. KegLand Part Number: KL22842
$186.99
-
Steel 20 ft³ Oxygen Tank | New | CGA540 Valve | US DOT Appoved
This is a refillable 20 CF O2 cylinder, good for about’ 500 batches of beer. The tank needs to be hydrotested every 10 years and is easily and affordably filled at any participating welding gas company. Specs: Cylinder: 20 cu ft Material: Steel Cylinder – Standard Valve Capacity: 20 cu ft (566 Liters) Service Pressure: 2015 PSI / 139 Bar Test Pressure: 3360 PSI DOT- and TC- Approved Valve Type: CGA540 Dimensions: Diameter: 5.2" (132 mm) Height: 14.8" (376 mm) Empty Weight: 14.1 lb
$139.99
-
Stem O-Ring for 1.5 in. Tri-Clamp Sample Valve
Replacement O-Ring for plunger-style 1.5" tri-clamp sample valve. Compatible with FF120. Please note: the color of the o-ring may vary.
$2.19
-
Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.
If you want to install the Temp Twister & Thermowell on your FermZilla's plastic lid, this step drill bit is the recommended tool for the job. Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many KegLand drip trays. For best results when drilling through metal, make sure to drill slowly (less than 600 rpm). Apply significant pressure behind the drill as you cut through. Cutting lubricant is recommended. Note that fast drill speeds will cause the metal and the bit to heat up which can shorten the lifespan of the drill bit. Specs: Drill Speed: 200-800 RPM Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm Hole Size Range (Imperial): 0.15" – 0.78" Coating: Titanium Nitride Suitable for: Metal, wood, plastic Tip: Self starting tip (no pilot hole required or center punch) KegLand Part Number: KL09447
$10.99
-
Stepless Clamp Tool
Clamp tool for stepless clamps. Kegland Part Number: KL07054
$10.99
-
Stepless Hose Clamp - 1/2 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/2" OD tubing (12-14 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06705
$10.99
-
Stepless Hose Clamp - 3/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 3/4" OD tubing (17-20 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06736
$10.99
-
Stepless Hose Clamp - 5/16 in. - 3/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/16" to 3/8" OD tubing (7-10 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06682
$10.99
-
Stepless Hose Clamp - 5/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/8" OD tubing (14-16 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06712
$10.99
-
Stepless Hose Clamp - 7/16 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 7/16" OD tubing (10.5-12.5 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06699
$10.99
-
Stepless Hose Clamps - 1/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/4" OD tubing (6-8 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06675
$10.99
-
Sterile Siphon Starter - For 3, 5, 6, and 6.5 Gallon Carboy with smooth necks
The easiest way to start a siphon! Simply blow into the sterile filter, which slightly pressurizes the carboy, causing wine to flow out. This is hands down superior to the numerous other methods of starting a siphon (and we have tried them all!) No sucking the end of the tube, no plungers with faulty gaskets, no shaking, no filling up the tube with unsterilized water, nothing to break, no contamination, no disturbing the sediment, and no fuss. Can you tell we really like it! How to Use Attach the Sterile Siphon starter assembly by firmly pushing the orange or yellow carboy hood over the mouth of the carboy. Slide the racking cane to the desired depth, just about the sediment level and blow into the white, sanitary air filter for 2-3 seconds. Blowing through the filter forces wine out through the racking cane, starting the siphon. There is no need to worry about contamination from your mouth, as the sanitary filter removes 99.98% of airborne bacteria. For a video demonstration, check out the video below. Tip to Remove Oxygen in Line We suggest that as your starting the siphon you pinch the clear, flexible tubing near the racking cane. Release the pinch on the tubing after 1-2 seconds, while continuing to blow through for an additional second. This will cause the clear vinyl tubing to fill completely with wine, eliminating oxidation that can occur in siphoning when your line is not completely full and wine is mixing with oxygen. Special Tip for Additional Use of Sterile Siphon Starter while sanitizing carboys Fill your carboy with sanitizer as normal. Take the red tip off the end of the stainless racking cane and insert Siphon Starter assembly into carboy filled with sanitizer. Blow on filter to begin siphoning sanitizer out of carboy. As the sanitizer empties the carboy fills with filtered air, leaving a sanitized, bacteria free environment to fill your wine into. Sterile Siphon Includes: 26 inch Stainless Racking Cane Red Sediment Reduction Tip Rubber Carboy Blowoff Hood w/White Caps (Fits 3, 5, 6, 6.5 Gallon smooth neck glass carboys; see R552 if you have the more common Italian 6.5 gallon carboy with threads) 5' 3/8" ID Vinyl Tubing Stainless Hose Clamp Sterile Air Filter About the White Sterile Filter: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. STORE DRY AT ALL TIMES. DO NOT SANITIZE FILTER.
$24.99
-
Sterile Siphon Starter - For 6.5 Gallon Carboy with threaded neck
The easiest way to start a siphon! Simply blow into the sterile filter, which slightly pressurizes the carboy, causing beer to flow out. This is hands down superior to the numerous other methods of starting a siphon (and we have tried them all!) No sucking the end of the tube, no plungers with faulty gaskets, no shaking, no filling up the tube with unsterilized water, nothing to break, no contamination, no disturbing the sediment, and no fuss. Can you tell we really like it! How to Use Attach the Sterile Siphon starter assembly by firmly pushing the orange or yellow carboy hood over the mouth of the carboy. Slide the stainless racking cane to the desired depth, just about the sediment level and blow into the white, sanitary air filter for 2-3 seconds. Blowing through the filter forces beer out through the racking cane, starting the siphon. There is no need to worry about contamination from your mouth, as the sanitary filter removes 99.98% of airborne bacteria. For a video demonstration, check out the video below. Tip to Remove Oxygen in Line We suggest that as your starting the siphon you pinch the clear, flexible tubing near the racking cane. Release the pinch on the tubing after 1-2 seconds, while continuing to blow through for an additional second. This will cause the clear vinyl tubing to fill completely with beer, eliminating oxidation that can occur in siphoning when your line is not completely full and beer is mixing with oxygen. Special Tip for Additional Use of Sterile Siphon Starter on Brew Day During the brew day fill your carboy with sanitizer as normal. Take the red tip off the end of the stainless racking cane and insert Siphon Starter assembly into carboy filled with sanitizer. Blow on filter to begin siphoning sanitizer out of carboy. As the sanitizer empties the carboy fills with filtered air, leaving a sanitized, bacteria free environment to fill your beer into. Sterile Siphon Includes: 26 inch Stainless Racking Cane Red Sediment Reduction Tip Orange Carboy Hood for 6.5 Gallon Carboy with threaded neck 5' 3/8" ID Vinyl Tubing Stainless Hose Clamp Sterile Air Filter About the White Sterile Filter: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. Note: The color of the hood you recieve may vary from the hood that is pictured.
$24.99
-
Sterling Hop Rhizome
6.0-9.0% AA. Grows well in all climates. Sterling is a hybrid of Saaz. Sterling is a great substitute for Saaz due to a similar spice aroma. This hop is very similar to Santiam but not as floral. Best described as herbal and spicy, with a hint of floral, citrus (lemon/pineapple) characteristics. Ideal for all Lagers, Belgian ales, and Wheat ales. Rhizomes should be planted immediately for best results. If your area is still experiencing frost then you can plant them in a planter indoors until it is safe to transplant outside. The first years crop will generally be smaller than subsequent years. Since these are live plants, we cannot guarantee they will grow, so we recommend buying two of each type to help ensure their success. Shipping Restrictions: Due to agricultural restrictions, we can only ship rhizomes to addresses that are in the United States, excepting Hawaii, Oregon, Washington, and the counties of Bonner and Kootenai in Idaho. Unfortunately, we cannot ship these to international locations including APO/FPO addresses.
$6.99
