Products

This set of wide legs allows the HellFire™ Burner fit kettles up to 25"! Including the 55 Gallon BoilerMaker™ Kettles.  

Read more less

The Blichmann Engineering HellFire™ XL Burner fits kettles up to 25"! Including the 55 Gallon BoilerMaker™ Kettles. There's your everyday homebrew burner, and then there's the HellFire™ Burner! No doubt in a league of its own, the HellFire™ burner is the best burner on the market, and one that will not only make your brew day quicker, but will also last you for years of brewing to come. It's dual mode capability allows you to switch between High Efficiency mode (80,000 BTUs) and HellFire™ mode (140,000 BTUs). Efficient, fast, and versatile.  The new burner from Blichmann Engineering is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs.  No wonder it is patent pending!  This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Features: Dual mode capacity High Power Mode: 140,000 BTU/hr Efficiency Mode: 80,000/hr Patent Pending Clip-on Heat Shield keeps valves cool Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years! Designed for outdoor use, the heat shield and body will protect your brew from wind  

Read more less

Leg extensions for the new Blichmann Hellfire burner.

Read more less

Turn your kettle into a Heat Exchanged Recirculation Mash System with the HERMS coil from Blichmann Engineering. Comes in two sizes, small for 7.5 to 10 gallon kettles, and large for 15 to 55 gallon kettles. Installation instructions can be found below under "Documents". 304 Stainless Steel Small HERMS Coil fits up to 10 Gallon Kettles Large HERMS Coil fits 15 to 55 Gallon Kettles Easy to install and sanitize bulkhead fittings! 1/2" NPT Connections Includes two 1/2" elbow QuickConnector™ fittings! Dimensions: Small - 7.75" (tall); 25' long tube Large - 9.5" (tall); 32' long tube   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Traditional screen filters draw from the bottom of the kettle — immediately sucking all pellet hops and fine break material into the screen, where they plug. In Blichmann Engineering's HopBlocker™, preferential flow leaves settled fine break material (hops and trub) undisturbed at the bottom of the kettle while draining the majority of the wort through a coarse filter from the top down. When the wort level is just a couple of inches from the bottom of the kettle, the fine filter element is then exposed by lifting the shield, and the remainder of the wort is filtered. It's an intuitive design that allows the fine filter to work only on a small portion of the wort, not all of it. The HopBlocker™ will filter up to 95% of the break material and hops from your wort without plugging. While it is designed specifically to complement Blichmann Engineering's BoilerMaker™ brew kettles, the HopBlocker™can be installed in any manufacturer's kettle or keg.   PLEASE NOTE: The HopBlocker is designed for use with pellet hops only. Whole/loose hops will plug the unit. While using whole hops, or a mix of whole and pellet hops, you must bag your whole hops in a large muslin grain bag. This will not affect the utilization rate and will result in significantly less wort loss.

Read more less

The HopRocket™ is an incredibly innovative hop infusing tool packed with world-class features! It can be used as a hopback, but it also doubles as an inline hop infuser (Randalizer) for your beer-dispensing system! Definitely cool, consistently reliable and clearly Blichmann Engineering™, the Hop Rocket™ will send your hop aroma into orbit! Features: Pressure-tight - up to 40 psi operation! Holds up to 3 oz. of whole hops as a hopback and 4 oz. as an infuser - twice as much as the competition! 100% stainless construction and silicone seals No need to monitor wort level because the HopRocket™ will never overflow Fully enclosed system from brew kettle to fermentor means no volatile hop aromas are lost! Optional HopRocket Mounting kit to easily integrate your Hopback into your TopTier™ modular brewing stand Inlet at the bottom allows air to automatically purge to reduce hot-side aeration Fine filter with wiper seal sends very clear wort to your fermentor Coarse filter and cone bottom inlet prevents wort channeling and backup for even hop utilization Fill with up to 3 oz. of rice hulls to use as an inline filter Works on gravity systems and with pumps (about 4 feet — or 1 meter — of static head is recommended for best gravity performance) Doubles as an awesome hop infuser (Randalizer) for your draft dispensing system. New Draft Dispensing Kit it available for simple installation in your home draft system 1/2" NPT connections are easy to make connections— a perfect match for our popular QuickConnector™ fittings (1/2" barb, 3/8" barb and 1/4" flare)

Read more less

Replacement clamp for the Blichmann HopRocket

Read more less

Replacement O-ring for the Blichmann HopRocket

Read more less

This kit includes everything you need to connect your HopRocket™ to your draft system for freshly infused hop, coffee, or any flavor you may choose!

Read more less

If you want a top of the line, electric, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The HERMS-style system comes in 5 different batch sizes listed above. The system comes with 3 Boilermaker kettles (2 electric) with 240 v BoilCoils, 2 Riptide Brewing Pumps, 2 Tower of Power Controllers, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. Blichmann's BoilCoil are engineered to perform at their best in the Boilermaker kettles. They'll provide consistent heating, boil quality, and boil-off rates. The BoilCoil has an ultra low watt density making scorching impossible when used properly. Made from stainless steel and with an easily removable plug to clean. The Tower of Power temperature controllers give you precise control over the temperature of your mash and your boil. They come mounted to the table for your convenience. They provide PID temperature control with a Class A precision RTD temperature sensor, all in a compact, brushed stainless enclosure. Features: 3 - Boilermaker Kettles (2 Electric) Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles 1 BBL size includes 3 - 55 gallon kettles   2 - 240 v BoilCoils Each BoilCoil is built for the Boilermaker kettles so you can count on consistent heating performance, boil quality, and boil-off rates. The BoilCoils have less than ultra low watt density meaning there is no chance of scorching when used properly Made from stainless steel Cleaning is easy with the removable plug The 240 v Coil includes a 12 ft cable with a molded twist lock L6-30P plug   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - Tower of Power Temperature Controllers PID Temperature Control On/Off/Auto mode selector Class A precision RTD temperature sensor Digital power control to meter the intensity of the heating element from 0-100% Controllers come mounted to the table for ease of use Compact, brushed stainless enclosure *1 BBL Size comes with 2 x Tower of Power Dual Element Controllers   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10/15 gallon size - 72 in L x 24 in W x 25 in H 20 gallon and 1 BBL size - 96 in L x 30 in W x 24 in H Please Note: The assembly video below uses the RIMS system as an example.

Read more less

If you want a top of the line, electric, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The RIMS-style system comes in 4 different batch sizes listed above. The system comes with 3 Boilermaker kettles (2 electric) with 240 v BoilCoils, 2 Riptide Brewing Pumps, 2 Tower of Power Controllers, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. Blichmann's BoilCoil are engineered to perform at their best in the Boilermaker kettles. They'll provide consistent heating, boil quality, and boil-off rates. The BoilCoil has an ultra low watt density making scorching impossible when used properly. Made from stainless steel and with an easily removable plug to clean. Features: 3 - Boilermaker Kettles (2 Electric) Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles   2 - 240 v BoilCoils Each BoilCoil is built for the Boilermaker kettles so you can count on consistent heating performance, boil quality, and boil-off rates. The BoilCoils have less than ultra low watt density meaning there is no chance of scorching when used properly Made from stainless steel Cleaning is easy with the removable plug The 240 v Coil includes a 12 ft cable with a molded twist lock L6-30P plug   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - BrewCommander™ Brewhouse Controllers Intuitive touchscreen interface Keypad data entry Advanced temperature control algorithm Automated step mashing with up to 5 steps and 9 profiles Boil addition times with up to 7 additions and 9 profiles Integral pump switch Lab-grade precision thermometer that is superior to RTDs Advanced customizable settings Mash step ramp rate delay HERMS / RIMS offsets Audible alarms Upgradable firmware Switchable between table and wall mounting Modular with multiple unit connections possible Optional relay modules allow control of a single kettle with up to 5 heating elements all on one controller Optional SparkBox™ Remote Ignition Module Offered in electric and gas versions   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10 gallon size - 72 in L x 24 in W x 25 in H 15/20 gallon size - 96 in L x 30 in W x 24 in H

Read more less

If you want a top of the line, gas-fired, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The HERMS-style system comes in 5 different batch sizes listed above. The system comes with 3 Boilermaker kettles, 3 HellFire Burners, 2 Riptide Brewing Pumps, 2 Tower of Power Gas Controllers, and the Therminator Wort Chiller, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. The HellFire Burner is a highly efficient burner with dual mode capability and is unlike anything else on the market. This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design. In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. The Tower of Power temperature controllers give you precise control over the temperature of your mash and your boil. They come mounted to the table for your convenience. They come with a pilotless electronic ignition control system that will instantly relight your burner if blown out by wine, and will automatically shut down if a flame is not detected within 10 seconds. Also offers a Class A precision RTD temperature sensor, all in a compact, brushed stainless enclosure. Features: 3 - Boilermaker Kettles Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles 3 - HellFire Propane Burners 140,000 BTU/hr at full power, 80,000 BTU/hr in efficiency mode (50% power setting)  Patent pending clip-on heat shield Adjustable kettle retaining bars Non-rusting, fume free heavy gauge stainless frame   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - Tower of Power Gas Temperature Controllers PID Temperature Control On/Off/Auto mode selector Class A precision RTD temperature sensor Controllers come mounted to the table for ease of use Compact, brushed stainless enclosure   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10 gallon size - 72 in L x 24 in W x 28 in H 15/20 gallon - 90 in L x 26 in W x 24 in H This gas system comes ready to use with Propane. To use with Natural Gas, see the conversion kit listed below in the "You Might Also Need" section. Please Note: This system requires one 120v 15 Amp GFCI outlet.

Read more less

If you want a top of the line, gas-fired, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The RIMS-style system comes in 5 different batch sizes listed above. The system comes with 3 Boilermaker kettles, 3 HellFire Burners, 2 Riptide Brewing Pumps, 2 Tower of Power Gas Controllers, and the Therminator Wort Chiller, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. The HellFire Burner is a highly efficient burner with dual mode capability and is unlike anything else on the market. This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design. In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. The Tower of Power temperature controllers give you precise control over the temperature of your mash and your boil. They come mounted to the table for your convenience. They come with a pilotless electronic ignition control system that will instantly relight your burner if blown out by wine, and will automatically shut down if a flame is not detected within 10 seconds. Also offers a Class A precision RTD temperature sensor, all in a compact, brushed stainless enclosure. Features: 3 - Boilermaker Kettles Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles 1 BBL size includes 3 - 55 gallon kettles   3 - HellFire Propane Burners 140,000 BTU/hr at full power, 80,000 BTU/hr in efficiency mode (50% power setting)  Patent pending clip-on heat shield Adjustable kettle retaining bars Non-rusting, fume free heavy gauge stainless frame   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - Tower of Power Gas Temperature Controllers PID Temperature Control On/Off/Auto mode selector Class A precision RTD temperature sensor Controllers come mounted to the table for ease of use Compact, brushed stainless enclosure   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10 gallon size - 72 in L x 24 in W x 28 in H 15/20 gallon & 1BBL size - 90 in L x 26 in W x 24 in H This gas system comes ready to use with Propane. To use with Natural Gas, see the conversion kit listed below in the "You Might Also Need" section. Please Note: This system requires one 120v 15 Amp GFCI outlet.

Read more less

This kit will come with 3 natural gas orifices for the Gas Pilot Systems. This is everything you need to convert your Pro Pilot System from propane to natural gas. Compatible with Blichmann Horizantal Gas Brew Systems

Read more less

The Oxygen Flow Regulator from Blichmann Engineering™ helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort.  Vital to yeast health and the final flavor profile of your beer.  Knowing the FLOW is important - other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely.  Gone are the days of spray and pray!  

Read more less

This amazing product is an ideal companion with Blichmann’s revolutionary BoilCoil™ immersion heaters, but it’ll also work with all manufacturer’s immersion heaters!  Blichmann’s unique modular power controller lets you precisely control the power of your electric heating element from 0-100% power.  Need to control more than one heating element for large kettles?  Simply add up to 4 additional relay modules and drive them all with one power controller.  Unlike cheap "dimmer switch" based power controllers, whose power output is not linear, the modular power controller is much easier to control the perfect boil intensity and heating rate.  This is accomplished using a tried and true industrial technique called Pulse Width Modulation (PWM).  Simply put, it controls the percentage of time the heater is energized over a very short 1 sec interval.  So turning the knob to “6” energizes the heater for 0.6 seconds, and turns it off for the remainder of the 1 sec interval.  This robust reliable technique is gentle on your heater, is extremely linear, and doesn’t create electrical noise like other techniques can.  See below for other great features. Precise linear control of power from 0-100% with a fast-acting intuitive power knob Industrial grade PWM control methodology is reliable, gentle to heating elements, and very linear Ideal for boil kettle and BIAB applications where temperature control is not needed, but precise power control is.  Note that this product does not read or control temperature Allows you to dial in an exact and repeatable boil off rate to hit your final boil volume batch after batch Perfect match for Blichmann’s BoilCoil™ electric heaters, but also works with any manufacturer’s immersion heater 30A 240V (7200W) single phase, and 20A 120V (2400W) models available L6-30 30A 240V or L6-20 120V with power cable “pigtails” available Have a large kettle with more than on heating element?  Up to 4 optional relay modules can be quickly installed allowing you to drive up to 5 heating elements simultaneously with one power controller Unique enclosure has provisions to route cables out of the back for table mounting, or out of the bottom for wall mounting.  Field changeable Integral DIN rail groove on the back allows connecting multiple controllers and relay modules together for wall or table mounting using readily available DIN mounting channels   Note: 240v pictured in reverse image. Power relay sold separately (not currently available in 120v). Mounting bracket sold separately (BL997).

Read more less

This amazing product is an ideal companion with Blichmann’s revolutionary BoilCoil™ immersion heaters, but it’ll also work with all manufacturer’s immersion heaters!  Blichmann’s unique modular power controller lets you precisely control the power of your electric heating element from 0-100% power.  Need to control more than one heating element for large kettles?  Simply add up to 4 additional relay modules and drive them all with one power controller.  Unlike cheap "dimmer switch" based power controllers, whose power output is not linear, the modular power controller is much easier to control the perfect boil intensity and heating rate.  This is accomplished using a tried and true industrial technique called Pulse Width Modulation (PWM).  Simply put, it controls the percentage of time the heater is energized over a very short 1 sec interval.  So turning the knob to “6” energizes the heater for 0.6 seconds, and turns it off for the remainder of the 1 sec interval.  This robust reliable technique is gentle on your heater, is extremely linear, and doesn’t create electrical noise like other techniques can.  See below for other great features. Precise linear control of power from 0-100% with a fast-acting intuitive power knob Industrial grade PWM control methodology is reliable, gentle to heating elements, and very linear Ideal for boil kettle and BIAB applications where temperature control is not needed, but precise power control is.  Note that this product does not read or control temperature Allows you to dial in an exact and repeatable boil off rate to hit your final boil volume batch after batch Perfect match for Blichmann’s BoilCoil™ electric heaters, but also works with any manufacturer’s immersion heater 30A 240V (7200W) single phase, and 20A 120V (2400W) models available L6-30 30A 240V or L6-20 120V with power cable “pigtails” available Have a large kettle with more than on heating element?  Up to 4 optional relay modules can be quickly installed allowing you to drive up to 5 heating elements simultaneously with one power controller Unique enclosure has provisions to route cables out of the back for table mounting, or out of the bottom for wall mounting.  Field changeable Integral DIN rail groove on the back allows connecting multiple controllers and relay modules together for wall or table mounting using readily available DIN mounting channels   Note: Power relay sold separately (BL996). Mounting bracket sold separately (BL997).

Read more less

This is a kit of Blichamnn's Oxygen Flow Regulator along with their inline diffusion stone setup to allow you to add oxygen to your wort inline to further prevent contamination. The new Blichmann Engineering™ Oxygen Flow Regulator helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort.  Vital to yeast health and the final flavor profile of your beer.  Knowing the FLOW is important - other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely.  Gone are the days of spray and pray!

Read more less

Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 2000 W, 120V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process!  Features: The RIMS-Rockettm heating element is 2000 W, 120V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable!  The RIMS-Rockettm heater assembly clamps right into our HopRockettm canister for added versatility and lower cost. The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.  

Read more less

Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature.   The RIMS-Rocket operates with 3500 W, 240V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process!    Features: The RIMS-Rockettm heating element is 3500 W, 240V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable!  The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.

Read more less

Replacement O-ring kit for Blichmann RipTide™ pump.  

Read more less

Replacement O-ring for RipTide™ brewing pump  

Read more less

The RipTide™ pump - built from the ground up as a homebrewing pump! Includes valve and base - a $50 retail value! Gone are the days of  making do with a general purpose pump such as the March 815 and all the variant imported copies.  These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright.  They also use noisy open motors that must be shielded from liquids.  All undesireable attributes for a homebrewing pump!  The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems!   The all new RipTide™ is the very first pump designed specifically for homebrewing!  We've solved the problems that have plagued homebrewers for years! High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of lift! Tri-clamp head connection fully disassembles in seconds for easy cleaning 1/2" NPT inlet and outlet connections Totally enclosed motor is splash proof and super quiet (50 dB) Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.  A separate valve and fittings can easily cost you an additional $25-35! Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps! Stainless steel head rotates 360 degrees to fit in virtually any installation Large stable base with protective rubber feet keeps the pump from tipping - a $25 retail value included! Convenient power switch on the base Includes a 10ft long cord with plug (120V) Base acts as a cord wrap for convenient storage Assembled in USA from USA and imported components            

Read more less