I had to knock off two stars because I guess Blichman made some cuts and no longer sends their products in the nice branded hard shell cases. Totally not a deal breaker for me but a company of their size and industry respect should make that clear to long time customers who expect a certain level of quality from them. The improvements they made since the first quick carb are fantastic this product is still worth the purchase regardless of no case and great to have around when you just want to get something carbbed up quick.

Worked well to carbonate fast. Finished with keg on c02.

I enjoy using the carbonation it’s pretty easy to use. Only need to remember to follow the flow of the beer and prepare a bucket of cleaner and one of sanitizer

I was not sure how difficult it would be to setup with all the parts but it turned out to be super easy. I was able to get my first carbonation done in about 1.5 hours from box open till cleaned and back in the box. The results were perfect with a 45 min run time with 14 pounds at 39 degrees. Yes it is a bit costly but the results are outstanding considering similar results would take 10-14 days

I bought the Blichmann QuickCarb months ago and they finally came back into stock. My main use is carbonated water. I like to have a 5 gallon Corny keg with water in my kegerator at all times. This unit will carbonate a keg in about 40 minutes to 30psi. The only problem I had was that the water would sneek up the gas line between kegs if I don't close off the gas valve so remember to do so. I've also carbonated a hard cider I made and am going to try with a wine next.

We own a small nano brewery (1bbl) and this little beast can carb our kegs and we don’t waste a bunch of CO2 to headspace in our brite tank. We can half of the beer and can condition so this tool is really helpful for our really small operation.

Works like a charm. Decided to buy the bottling gun as well based on this product.

This thing is nice. Use the carb chart add ~2 psi to the recommended pressure/temp and you'll be golden.

This is one of the best pieces of equipment I have purchased. Makes kegging and carbonation control easy.

I bought this handy beer gadget to quick carb beer and it works as intended. I let it run for 45 minutes and it carbed my beer nicely. Was it 100%? Nope. But was drinkable immediately and within a day or two it under pressure my beer was fully carbed. Now for the good stuff. After watching this thing take beer out of a keg carb it and return it to the keg I figured why not filter the beer before I carb it? So I attached a cheap household water filter and added a 3 micron BevBright filter and holy smoke worked like a charm. I now filter right from my fermenters into a serving keg cold crash carb and serve. This thing is awesome and has removed a few steps from the brew process.

Easy to use couldn't be happier doubles as a decent racking pump to not have to use siphons anymore.

Does what it say it will little loud but worth every penny to perfectly carb your beer and be able to drink it in less than an hour

This thing really works well. I have carbonated stouts pales and lagers with the the quick carb and it has given me perfectly carbonated beer every time. I would definitely recommend it if you want your freshly-kegged beer ready to drink in under an hour.

We bought this to carb our small run barrel-aged beers that wouldn’t easily be carbed in a Brite or FV. Added the sankey kit and a little pipe insulation to keep the light off the beer. Overall very happy with how this performed and has saved us weeks of trying to force carb otherwise.

Works great - I found a super helpful youtube video to watch so I didn't need to read the instructions

If you're here you know what you're looking at. It's a device which flows beer across an aerator stone pressurize with CO2. Does it work? Yes. The quality of the parts is superb. It comes with everything needed to attach to your CO2 bottle post regulator. Don't have any appreciable pressure in your keg. otherwise stuff starts flowing the wrong direction toward the regulator.

fully carbonated 5 gallon keg in 45 minutes No leaks no problems followed simple instructions easily found you tube videos

A great Tim seaver and so far the carbination has work perfectly. Pump great for transfers also.

Sure you can carb up beer many different ways but this gives impatient folks like me far quicker results. It performs flawlessly. It is worth what it costs.

I was so tired of force carbonation waiting a couple of days to see if the level of C02 was what I liked. I tried the rocking the keg method but was just never really satisfied with the results it was hit and miss. After my first 3 beers using the quick carb system and getting familiar with how it works easily one of the best purchases I have made. Keg the beer refrigerate to 35* pull it out and carb. Your ready to drink in 20-30 minutes. For clean up run some PBW starsan and rinse.

This thing does what it advertises. If you are like me and lack the patience to wait for your beer to carb this is for you. It's easy to use and super easy to clean. Other brewers have complained about the connections leaking I had no issue with this. A+

As a nanobrewer currently using plastic conicals I can’t carb in the fermentors as I’d like to. And leaving headspace in kegs is a royal pain in the rear and shaking a half barrel keg to carbonate is downright dangerous. Enter the quickcarb! All of five minutes spent to chop off the flare connectors and attach some tailpieces then hooked up to a regular sanke coupler and off to the races. This will carb a keg to a T check the actual beer temp cross reference your volumes/pressure/temperature chart dial in the co2 pressure and leave well alone. Forty five minutes gets me a sixtel finished about ninety minutes for a full half barrel.

Very well packaged and is a quality product. Instructions are rather easy to follow. Based on other reviews the issues with the high pressure fittings must have been addressed. Regardless I took some pliers and squeezed down on them a bit more just to be sure. No leaks. Easy to sanitize and clean. Take good care of the flare fittings for the CO2 line though as they easily fall out of the line and could easily get lost. Beer was perfectly carbonated using the provided chart and in less than an hour. I recommend chilling your beer to serving temp before carbonating. Still works at room temp it's just less pressure and easier once chilled. Worth the $$.

There was a bit of trial and error and we replaced all the hoses to be a bit more sturdy. We have found that carb is done when one stops seeing bubbles go through the line. We have a gas blender for beer gas mix and we've tee'd off a line to do one-off nitro beers. Super handy tool once you get it sorted out and its a breeze to clean.

Nice design iffy hose set up. Had to replace leaky hose clamps and cheap plastic compression type connections with good quality hose and clamps. After that it’s great.

So far I love it. Nice package!!!

Very impressed with the ease of use. Replaced their two compression fittings(plastic) with circle clamps worked perfectly. Beer is carbed in less than an hour.

I'm impatient. I don't know how I went this long without one worked like a champ. The case was broken upon arrival but no big deal.

Worked as described. No issues at all. I didn’t have any fitting leaks as some have reported and I used what it came with. May have overcarbonated a bit but that is likely my error.

I love my quick carb. I have a 1 BBL home brew system so being able to quickly carb kegs is great. This works as advertised and I can go from sanitation to carbing to cleanup in just about an hour and fifteen minutes to an hour and a half. This is my first piece of Blichmann equipment and it's some of the highest quality equipment that I've seen.