Products

Use this coil to make a cooling system for your 14 to 42 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Tall Cooling Coil fits 14 to 42 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 13.5" tall x 9" diameter

Read more less

Use this coil to make a cooling system for your 7 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Short Cooling Coil fits up to 7 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 9.5" tall x 9" diameter

Read more less

Power Adapter from Blichmann Engineering. The adapter allows the 240V BoilBoil cable with L6-30P plug to be used with a 14-50P outlet. 14-50P outlets are commonly used for charging electric vehicles, RVs and electric ranges. 1.25 ft in length.

Read more less

Power Adapter from Blichmann Engineering. 1.25 ft in length. 6-30P.

Read more less

Allows the use of the Blichmann QuickCarb on commercial keg couplers. Includes: 2 x coupler wing nuts 2 x 1/4 in male flare 2 x coupler washers 12v DC power adapter

Read more less

The Patent Pending QuickCarb™ keg carbonator from Blichmann Engineering™ is a revolutionary simple new way to carbonate a 5 gal keg of beer in less than an hour!  This patent pending product uses a simple circulating pump and a unique stainless steel diffusion stone to carbonate your beer precisely and quickly.  And with no chance of accidentally overcarbonating your beer!   90% carbonated and ready to drink in less than an hour with no risk of overcarbonation!  Let it sit for a day for dialing in that final few percent. Quiet and dependable operation Great for all beer styles! All stainless diffusion stone and QuickConnector™ fittings makes cleaning a breeze 10 micron stainless diffusion stone is durable, and is porous enough to allow sanitizer to fully penetrate.  Other manufacturers stones are delicate and must be boiled and handled with gloves.  Circulating pump is gentle and is powered with a simple DC transformer (included) Easy to clean and sanitize Interested in trying out inline oxygenation?  Simply add an optional oxygen regulator and you'll be able to use the QuickCarb™ components to oxygenate your wort before pitching your yeast!

Read more less

These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs! Please Note: This False Bottom is for the BoilerMaker™ G2 15 gal Brew Pot by Blichmann Engineering™ and will not function with the G1 model.   

Read more less

These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs! The hole in the top left of our picture is designed for use with the dip tube that is part of every BoilerMaker Kettle. Click on the second picture there to get a better view of how the screen would look setup with the dip tube! Please Note: This false bottom is designed to work with both G1 and G2 models of Blichmann Boilermakers.

Read more less

If you want to add a false bottom to your beloved 20 Gallon Blichmann BoilerMaker™ Brew Kettle in order to use it as a mash tun, this Blichmann 20 Gallon BoilerMaker False Bottom is designed especially to fit seamlessly for that exact purpose. This high quality false bottom is designed specifically for Blichmann kettles, and is necessary to convert one to a mash tun. The Blichmann 20 Gallon BoilerMaker False Bottom is made with a patent pending button louver design that is a hybrid of a perforated false bottom and a slotted manifold, combining the most beneficial qualities of both styles to truly give you the best of both worlds. Please Note: This False Bottom is for the BoilerMaker™ G1 & G2 20 gal Brew Pots by Blichmann Engineering™

Read more less

These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs!

Read more less

These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs!

Read more less

These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs! The hole in the top left of our picture is designed for use with the dip tube that is part of every BoilerMaker Kettle. Click on the second picture there to get a better view of how the screen would look setup with the dip tube! Please Note: This false bottom is designed to work with both G1 and G2 models of Blichmann Boilermakers.

Read more less

This is a Blichmann Spare Part. Replacement Fermenator pressure relief valve (PRV) o-ring.

Read more less

Manage your fermentation temperatures to exacting precision and repeatability with the Blichmann Pump & Controller Kit.  The perfect system to pair with a glycol chiller or ice bath, and the Fermenator™ cooling coils.  Features: High quality 24V DC submergible pump has 5 GPM output and quiet operation Temperature Controller is tuned and designed for brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps!  15A 120V operation 12” long thermowell fits in the included three hole stopper.  Fits all Fermenator™ conicals and any other vessel requiring a #7 stopper Includes 10ft of 3/8” PVC hose and hose clamps Compatible with Fermenator™ sizes 7, 14.5, 27, and 42 gallon Kit Includes: Submergible Pump Temperature Controller 10 ft. of 3/8" Silicone Tubing 3 Butterfly Hose Clamps Thermowell Dual Hole Stopper Power Adapter      

Read more less

Convert your Blichmann floor standing burner to use natural gas! This adapter includes the orifice and needle valve.

Read more less

Replacement regulator for Blichmann Floor Standing Burner.

Read more less

This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed.  It includes the lid, an AutoSparge™ level and flow control system,  a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 10 gallon batches Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only.  It does not include the required 15 gallon G1 BoilerMaker Mash Tun, 20 gallon G1 BoilerMaker Boil Kettle, Heat Source or Pump (see you might also need items below).  For a complete system, see the line of Turnkey BrewEasy Systems.  If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.

Read more less

This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed.  It includes the lid, an AutoSparge™ level and flow control system,  a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 20 gallon batches Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only.  It does not include the required 30 gallon G1 BoilerMaker Mash Tun, 30 gallon G1 BoilerMaker Boil Kettle, Heat Source or Pump (see related products below).  For a complete system, see the line of Turnkey BrewEasy Systems.  If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.

Read more less

This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed.  It includes the lid, an AutoSparge™ level and flow control system,  a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 5 gallon batches Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only.  It does not include the required 7.5 gallon G1 BoilerMaker Mash Tun, 10 gallon G1 BoilerMaker Boil Kettle, Heat Source or Pump.  For a complete system, see the line of Turnkey BrewEasy Systems.  If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.

Read more less

This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed.  It includes the lid, an AutoSparge™ level and flow control system,  a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 10 gallon batches Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only.  It does not include the required 15 gallon G2 BoilerMaker Mash Tun, 20 gallon G2 BoilerMaker Boil Kettle, Heat Source or Pump (see you might also need items below).  For a complete system, see the line of Turnkey BrewEasy Systems.  If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.

Read more less

This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed.  It includes the lid, an AutoSparge™ level and flow control system,  a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 20 gallon batches Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only.  It does not include the required 30 gallon G2 BoilerMaker Mash Tun, 30 gallon G2 BoilerMaker Boil Kettle, Heat Source or Pump (see related products below).  For a complete system, see the line of Turnkey BrewEasy Systems.  If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.

Read more less

This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed.  It includes the lid, an AutoSparge™ level and flow control system,  a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 5 gallon batches Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only.  It does not include the required 7.5 gallon G2 BoilerMaker Mash Tun, 10 gallon G2 BoilerMaker Boil Kettle, Heat Source or Pump.  For a complete system, see the line of Turnkey BrewEasy Systems.  If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.

Read more less

Discover the enhanced Blichmann Engineering Glycol Chiller — now more efficient than ever! With a powerful 1/2 HP compressor, it delivers cooling capacities of 3100 BTU/hr at 28 degrees Fahrenheit and 3400 BTU/hr at 34 degrees Fahrenheit. Operating quietly, it offers intuitive multi-vessel crashing and fermentation temperature control through a plug-and-play temperature controller dock, making temperature adjustments a breeze.  Designed for seamless integration into your existing home brewing setup, it has a compact footprint and organized cable with hose management to avoid unnecessary clutter. Compatible with up to 6 Pump & Controller Kits (optional accessory), this chiller is truly remarkable, and will ensure optimal performance for your brewing needs. Key Features: Powerful 1/2 HP Compressor Cooling capacity of 3100 BTU/hr @ 28°F and 3400 BTU/hr @ 34°F Multi-vessel crashing and fermentation temperature control Convenient plug-and-play temperature controller dock Compatible with up to 6 Pump & Controller Kits (optional) Tidy cable and hose management Small footprint Quiet operation Optional concentrated propylene glycol is offered in a convenient 2.5-gallon jug Lagering Temps Capability: (2) 1 BBL fermenters (4) 1/2 BBL fermenters (6) 7-gallon and 14-gallon fermenters Fermentation Temperature Control Capability: (4) 1 BBL fermenters (6) 7-gallon, 14-gallon, and 1/2 BBL fermenters   *Results based on vessels equipped with insulation at an ambient temperature of 75° F.  

Read more less

Blichmann's TopTier™ burner lit the brewing world on fire in 2009 with the first burner made specifically for the needs of the homebrewer. No wonder it became the best selling and most respected homebrew burner in the market. Efficient, fast, and versatile. This new burner is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs. This custom made burner is tuned to operate in high efficiency mode, and also in a second high power mode.  In the high power mode, you'll be amazed with 140,000BTU/hr output for blazing fast heating - double the power of our previous burner.  And significantly more power than anything else on the market.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation.  Plenty of power to keep a rolling boil on a 20 gal batch of beer.  Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort.

Read more less