Products

Keep your head cool while the boil stays hot with the BrewBuilt mesh snap back hat. Let 'em know you don't just drink craft beer — you brew it!  

Read more less

The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. Highly recommended for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and greatly assist in cold crashing. The sleeves are 6 mm thick with stitched piping on the edges for exceptional durability.   SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20  

Read more less

The perfect pint glass to enjoy that beer you brewed in a BrewBuilt boil kettle or fermented in an X1 Uni conical. Classic 16 oz "shaker pint" style glass with BrewBuilt logo.  

Read more less

Replacement lid gasket for X-Series BrewBuilt conicals. The 25/38 gal. gasket will fit X1 28/42 gal fermenters.

Read more less

The ultimate coaster, it won't stick to the bottom of your glass but it will stick to the top. Perfect for marking your beer while you make room for more beer. It will make an air tight but not pressure tight seal with most pint glasses. Designed to seal to the top of a 16oz Libby shaker glass.  

Read more less

This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing.  Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.

Read more less

The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt X-series conical 2" T.C. bottom port.

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 2.5" Stem is a perfect balance of being long enough to get accurate readings, while not protruding far enough to get hit by a wandering mash paddle or spoon. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 2.5" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 6" Stem here is perfect for Mash Tuns, as it will reach further into the mash to get a more representative reading. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 6" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

This unique thermowell fitting is has the probe offset from the center of the fitting, leaving room for additional hardware such as the BrewBuilt Whirlpool Return Fitting. Pairing the two fittings allows you to recirculate wort in your boil kettle while still getting temperature readings from your thermometer or temperature probe. The thermowell has a 6" probe that fits all BrewBuilt kettles so that you can get the most accurate temperature measurement of your wort.  

Read more less

Multi tier brew system. Requires less space and features an innovative tipping mash tun for easy cleaning. Digital Touchscreen Controller comes standard. Control every aspect of your brew day from a single screen Automatic HERMS mashing. Set up to five mash steps in the digital controller and temperatures will be raise and be maintained automatically Powerful Gas Burners. Whether you choose Propane or Natural Gas as your fuel source, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm. Eliminate hot side aeration with this fully adjustable sparge arm. Built to order in the USA. Every system features a custom-welded stainless steel frame manufactured in the BrewBuilt metal shop. Famous for its innovative tipping mash tun, the Tippy Dump BrewSculpture allows you to easily dump spent grain after mashing. Place a garbage can on the built-in step, tip the mashtun and you're done—no heavy lifting or scooping necessary! A Tippy Disc is welded directly to the kettle, allowing the mash tun to be locked in place when vertical and then to be rotated and locked in at different angles as you empty and clean the mash tun. The Tippy Dump system includes a built in flip-down stainless step giving you easy access to see into the mash tun. Inspired by professional brewpub brewhouses, which are designed to fit in tight spaces, the mash tun is placed directly over the hot liquor tank. This not only saves space but also allows for heat coming off the hot-liquor tank to help keep the mashtun warm during the mash. Touchscreen Control Panel From heating strike water to whirlpooling hop additions, you’ll orchestrate your entire brew day from our custom designed 7” touchscreen control panel. Unlike other systems, all of the heating elements and pumps can be controlled from a single touchscreen controller. Program your mash steps and the controller will do the rest—cycling heating elements and kicking on pumps to recirculate wort as needed. It also offers programmable delayed start so you can heat your strike water in advance, boil addition timers to remind you when to add hops or clarifiers, as well as manual control of your pumps and linear power control of the electric elements. Control Panel Key Features: Programmable HERMS Mash Steps - choose from 3 preset mash schedules or custom design your own with up to 5 steps. From there the control panel guides your mash through the temp raises and time rests automatically. Always Hot - Controller maintains the Hot-Liquor tank temperature you choose by turning the burner off and on automatically. Auto Sparging - Sparge water flow is controlled automatically with an integrated Mash Tun float switch Timer Alarms - Built in boil timers remind you when to add hops, finings, or anything else Manual Mode - allows you to control pumps manually for anything you want such as cleaning. Automatic HERMS Mashing Mash temps are maintained via the HERMS coil made from convoluted copper tubing. This top-of-the-line coil design offers unparalleled efficiency while gently heating your wort. Choose from your saved mash schedules or program one on the fly. When the mash begins, the controller will automatically maintain the temperature of the hot liquor bath that the HERMS coil rests in. When the wort temp drops below your set point, the controller will turn on the pump to circulate wort through the coil. You can also set the pump to continuously circulate wort for the whole mash if you prefer, and the HLT will continue to maintain your mash temp automatically. When each mash step is complete, the controller will raise the temperature of the HLT and begin the next step. The HERMS coil can also double as your wort chiller when the boil is over and quickly cools wort thanks to the twisted pattern of the copper tubing. Powerful Gas Burners Choose your fuel source! Natural Gas is a nice option for the brewer whose home is already supplied with natural gas. This is a convenient option since you will never have to refill propane tanks, and you will never run out of gas mid batch. However, you do lose the freedom to move your BrewSculpture™ once it has been hard plumbed to your gas line. Whether you prefer the mobility of using propane or the reliable supply of natural gas, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm No other system protects against hot side aeration quite like the BrewSculpture. While other systems simply pump wort back to the top of the mash tun and let it splash back down over the grain bed, the Ultimate Sparge Arm will make sure your wort circulates with virtually zero aeration. The Ultimate Sparge Arm features adjustable height and adjustable flow. Depending on what beer you’re brewing, the surface of the mash will be at different heights. Simply lower the sparge arm to just below the surface of the mash and your recirculation will be splash-free. The ball valve at the inlet of the sparge arm allows you to dial in the flow and reduce turbulence as you see fit. Custom Welded Frame Made in the USA Every BrewBuilt BrewSculpture is made to order and built around a custom TIG welded 304 stainless steel stand. While other companies cut corners by using generic stainless steel tables for their systems, our extra beefy stand is fabricated in our California-based metal shop and designed to outlive even you. Every stand comes with rolling casters and folding handlebar so you can easily move your system with ease whenever needed. What Sets the Digital BrewSculpture Apart? Only system with a heavy-duty, purpose-built, welded stainless frame as standard. Only system with rotating mash tun to easily dump spent grains Only system with digital touch screen as standard. Only system with programmable mash steps on touch screen.  Only system using top-of-the-line convoluted coil (HERMS) for the quickest temp increases while still being gentle. Only system with an oversized Hot Liquor Tank to speed up brew day. Welded fittings for a lifetime of easy-to-clean, leak-free performance. Ultimate Sparge Arm reduces hot side aeration. Keep sparge water warm while preheating the boil. Key Features of Tippy-Dump BrewSculptures Made in USA by BrewBuilt 304 Stainless Steel TIG welded stands. The ultimate frame material that will outlast you. No paint or powder coating. Every BrewSculpture includes folding handles and built-in rear casters that allow you to move your BrewSculpture with ease. Oversized 304 stainless BrewBuilt Kettles with welded fittings, notched lids, internally etched volume markers, aluminum clad bottoms, and silicone handles. Built to last. Our "Large" option will come with 22 gallon kettles, while the "XL" model will come with 30 gallon kettles. The fluid path is easy to use and clean. We've included the time tested, top of the line March pumps along with heat resistant food-grade silicone tubing and our own specially designed stainless quick disconnects. Burners are fast, efficient, quiet and have great flame control. Mashtun includes the Ultimate Sparge Arm with innovative design to eliminate hot-side aeration. The center draw outlet with quick disconnect is locked in during mashing but easily disconnects for cleaning. The mash screen has a very low volume of base water under the screen to aid with efficiency and mash consistency. The perforated stainless mash screen is reinforced for use with pump recirculation and includes a silicone gasket to make a perfect seal with the kettle wall. Internally etched volume markers make mash water additions super easy. Boil Kettle includes innovative Whirlpool maker for leaving hops and trub behind. Volume markers are etched on the inside so you know exactly how much wort you have at all times. The lid notch is super handy for hanging hop bags, using an immersion chiller, etc., but when not is use an included silicone plug seals the notch. The bottom of the boil kettle is tri-clad with a 4 mm aluminum core sandwiched between two layers of 304 stainless. The aluminum core eliminates scorching and the cleaning that comes with a scorched kettle. Includes all of the tubing you'll need with: 2 x 40 in. Hoses with male and female quick disconnects 90 in. Hose with male and female quick disconnects 32 in. Hose with 1 female quick disconnect and 1 open end Dimensions / Specifications: Stainless Frame measures 50" L x 22.25" W x 62" H Requires 110/120V power source   Please Note:  Natural Gas Sculptures require installation by a professional plumber. These units terminate in a ¾” Male Flare connection, and have multijet burners as opposed to the banjo style displayed in the pictures above.  

Read more less

Kettle Maximizer allows you to pull liquor or wort from below the depth of your kettle's bottom port Angle straight down in hot liquor tanks to maximize pick up Rotate to your preferred pick-up height in boil kettles to leave trub behind when transferring to fermenter The tri-clamp maximizer is recommended for boil kettles and hot liquor tanks with 1.5" T.C. bottom ports. This fitting will allow you to pull liquor or wort from below the depth of your kettle's bottom port without the need to tip your vessel. For hot liquor tanks, point the end of the tube straight down to maximize pick up. For boil kettles, you can rotate the maximizer to position the end of the tube at your preferred height above the bottom of the kettle, leaving room for a layer of trub that will be left behind in the kettle when you transfer wort to your fermenter. 1.5" tri-clamp Tube Length: 6.5" Overall Length: 8.18" Made from stainless steel

Read more less

The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 0.3–14.5 psi Made from 304 stainless steel 11.75" H x 4" Ø   For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

Read more less

The BrewBuilt Whirlpool Return Fitting allows you to recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. Install it in any tri-clamp kettle's thermometer port and attach your preferred valve to the side inlet. The front of the fitting can be capped off with a 1.5" T.C. end cap, or you can pair with the BrewBuilt Thermowell Offset to install a thermometer or temperature probe.  

Read more less

The X-Series Uni Pro's control box is wall-mountable, but if you don't have the necessary wall space, or you want to be able to store the control box when not in use, this stand is a convenient option. Custom welded from brushed stainless steel. The perfect height to set on a counter or benchtop.  Stand only. Control box not included. Approximate Dimensions: Height: 25.25" Width: 12" Depth: 10.5"  

Read more less

Replacement neoprene jacket for the BrewBuilt X2 Jacketed Uni conical. Not compatible with the X3 Jacketed Uni conical, X2 non-Jacketed Uni conical, or X1 Uni conicals.

Read more less

What sets the BrewBuilt X2 Series apart: Highest quality mirror finish. Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation. Four crossbar reinforced legs are superior for stability, mimicking Pro Uni Tanks. Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more.   Pressure Relief Valve with pull ring built into the lid. 2" oversized bottom port and Butterfly Valve. Coolest accessory upgrades like Pressure Pack with Floating Dip Tube, clear Flex Chamber trub collector, Coolstix, Kit for Pressure Fermentation etc. Read more Below! The BrewBuilt X2 Uni Conical was born of thousands of hours of research, contemplation, and development. The engineers and critical minds behind its realization scoured years of feedback from home and professional brewers alike to determine the ideal feature set of a stainless steel conical fermenter. And where standard features fell short, we pushed the boundaries into new territory never before seen on a premium conical fermenter. The end result is a unit purpose-built to advance your fermentation process, improve the quality of your finished beer, and look good doing it. This is the brewing sidekick that you’ll brag to your friends about. We guarantee that you will love the fit and finish of the X2 Uni Conical. Made entirely of 304 stainless steel, the quality exceeds what has previously been done in brewing applications and approaches the level of pharmaceutical-grade finish. With flawless welds and a dazzling mirror-polish finish inside and out, the BrewBuilt X2 Uni is easy to sanitize and even easier on the eyes. You’ll probably wanna snap a pic. #BrewBuilt Extra Large 2” T.C. Dump Valve Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 2" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Trub Separator and Yeast Harvester. Reinforced Four-Leg Foundation There’s a common complaint seen in the feedback for other conicals on the market—the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X2 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X2 conical exceedingly stable when compared to other models.  When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintop that they wanted stronger, sturdier legs right out of the box that don’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so can easily glide the fermenter around your brewery.  The reinforced four-leg design not only increased the stability and strength of the conical, it also allowed the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare. Adjustable Feet The X2 Uni comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time. Other Features You’ll Love: Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off Internally etched volume markers in gallons and liters Stainless steel lid clamp with single-piece molded silicone gasket In our X2 redesign we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons Optional Upgrades The base model X2 Uni allows you to purchase the conical at the most affordable price and upgrade as you go. All of the accessories included with the X2 Uni+ can be purchased separately, so you can start fermenting now and come back later to add features and improve your process. Flex Chamber - Trub Separator & Yeast Harvester The pressurizable Flex Chamber attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Pressure Pack with Clear Float Technology The Pressure Pack features a unique floating racking tube that can be used for taking samples, keg transfers, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened. Glycol-ready X-Series CoolStix™ Drop in the X-Series CoolStix for an easy-to-use, innovative solution for maintaining fermentation temps. Fits perfectly with the Pressure Pack's 1.5" T.C. port, or you can replace the Uni's 4" T.C. port with a 4" to 1.5" T.C. reducer. Cycle cooling solution through the CoolStix using either an IceMaster Glycol Chiller or a BrewBuilt Chiller Pump Kit placed in ice water. We highly recommend adding the Neoprene Jacket to help keep the conical insulated and improve cooling performance. CoolStix are designed for fermentation temperature control. Glycol-ready Ludicrous Coil The Ludicrous Coil offers unparalleled performance for an in-solution cooling apparatus and is highly recommended for brewers that want the top-shelf option with the highest cooling capacity. Aside from normal temperature control, when paired with a glycol unit, the Ludicrous Coil has the ability to chill beer down to cold crash temperatures. Pair with an IceMaster Max 2 and Neoprene Jacket to unlock the Ludicrous Coil's cold crashing capabilities. Not necessary for all brewers, but a significant upgrade over the CoolStix! BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X2 with an active fermentation) The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual.  Hop Bong Oxygen-Free Dry Hopping Device The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. High Roller Caster Set Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters. X2 Uni Conical Features: 304 stainless steel construction Mirror polish finish Interior welds are the best in the business - uniquely ground and polished  (3) Horizontal welded cone ports (1) 4" TC Lid Opening (2) 1.5" TC Lid Openings 2" TC bottom dump with 2" TC butterfly valve 1.5" Thermowell for inserting thermal probe Strong welded in place handles  (4) Adjustable feet Silicone tube for blow off Stainless lid clamp & one piece molded gasket Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations) Internally etched volume markers Specs:    

Read more less

The BrewBuilt X2 Conical Lid comes with one 4" T.C. port and two 1.5" T.C. ports. This is a direct replacement to the lid that comes standard on the X2 Uni, but X1 Uni owners can also upgrade to this lid if they want to take advantage of the second 1.5" port. This extra port is great for adding hops or other flavor additions without needing to remove and reinstall the Blowoff U Barb or other accessories attached to the primary 1.5" port. Also features a pull ring PRV built into the lid. The 25/38 gal size will fit X1 28/42 gal fermenters. NOTE: The lid does not include clamps, gaskets, or other fittings seen in the example photo. The PRV will come pre-installed and all other ports will come bare.

Read more less

Replacement tri-clamp lid for the BrewBuilt X3 Uni Conical. Features a 4" T.C. ferrule, (2) 2" T.C. ferrules, and a built-in pull-ring PRV. Compatible with all sizes of X3 via 8" tri-clamp connection. Not compatible with X2 or X1 Uni Conicals. Lid only. The replacement lid comes with the PRV but does not include tri-clamps, gaskets, or other parts & accessories pictured in the example photo.

Read more less

Replacement neoprene jacket for the X3 Uni Conical fermenter. Not compatible with X2 or X1 Uni Conicals.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The BrewBuilt™ Boil Vigor Controller allows you to control the current of 208-240V heating elements up to 30 amps. Perfect for dialing down a boil or adjusting the heat input to a still wash pot. The controller works by adjusting the percentage of power delivered to the heating element. The power is increased in a linear fashion from 0 to 100% as you adjust the dial from 1 to 11. Features industrial-style power switch, dial knob, and digital display mounted on a splash resistant stainless steel enclosure. Precut mounting holes for attaching the controller to a brew stand or mounting on the wall. L6-30 connections with 4 ft. cords on either end. The controller uses an oversized SSR with a very large fan cooled heatsink for better reliability. It includes a contactor to fully shut off both legs when you throw the power switch, which makes the free end of the cord safer when the element is not plugged in. The display gives you a reading of the actual current being consumed by your element in Amps. Max Current Rating of 240V / 30 Amps. If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.     **Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**  

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Enhanced Cooling & Clarity: Includes an innovative jacketing system for efficient cooling and a welded tangential arm for enhanced whirlpooling, ensuring clear wort transfers and maximum hop utilization. SlingBlade Heating Element: Ultra-low watt density element heats efficiently without obstructing other kettle accessories. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Elevate your homebrewing craft with BrewBuilt Boil Kettles – where professional-grade design meets passionate homebrewers. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our Boil Kettles feature an innovative jacketing system for effective cooling, helping you reach desired temperatures more quickly and precisely. They also include a welded tangential arm for optimal whirlpooling, ensuring clear wort transfers and maximum hop utilization. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. These kettles are also designed to work hand-in-glove with the included SlingBlade Heating Elements, offering seamless integration for electric brewing setups. Power cord or controller must be purchased separately. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Elevate your brewing experience with BrewBuilt Boil Kettles, designed for the serious homebrewer. Major Features for Brewers: High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Jacketing System for efficient heating Welded Tangential Arm for superior whirlpooling High Quality sanitary welded TC Ferrules SlingBlade Electric Heating Element(s) (240V) Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Loaded Boil Kettle Includes: Jacketed Bottom Drain Boil Kettle with Tangential Arm SlingBlade Heating Element(s) Thermowell Butterfly Valves TC Clamps and Gaskets Notched Lid with TC CIP Port Feet SlingBlade Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 20 & 30 gal element 50-gallon kettle requires 2 x 30 amp circuits Includes 2 x 5750 Watt elements Wattage: 10 gal - 3750 Watts 15 gal - 4500 Watts 20 gal - 5000 Watts 30 gal - 5750 Watts Please Note: The kettle does not include a power cord for the heating element. You will need to purchase a power cord or your preferred element controller separately. Warning: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. SlingBlade Heating Element: Ultra-low watt density element heats efficiently without obstructing other kettle accessories. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets passionate homebrewers. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. These kettles are also designed to work hand-in-glove with the included SlingBlade Heating Elements, offering seamless integration for electric brewing setups. Power cord or controller must be purchased separately. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Major Features for Brewers: High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High Quality sanitary welded TC Ferrules SlingBlade Electric Heating Element(s) (240V) Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Includes: BrewBuilt Dish Bottom Kettle SlingBlade Heating Element(s) Thermowell Butterfly Valve TC Clamps and Gaskets Lid with TC CIP port Feet SlingBlade Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 20 & 30 gal element 50-gallon kettle requires 2 x 30 amp circuits Includes 2 x 5750 Watt elements Wattage: 10 gal - 3750 Watts 15 gal - 4500 Watts 20 gal - 5000 Watts 30 gal - 5750 Watts Please Note: The kettle does not include a power cord for the heating element. You will need to purchase a power cord or your preferred element controller separately. Warning: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.

Read more less