Products

Welded 1.5" tri-clamp ports for a lifetime of leak-free use Front & back positioned handles reduce the space needed to arrange multiple kettles in a horizontal system 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Front & back oriented handles with silicone coated handles for heat protection Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting   Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30    

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle Side handles with silicone coated handles for heat protection Stainless handles with stainless rivets for secure lifting   Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30    

Read more less

The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third tri-clamp port is offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. BrewBuilt T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. This kettle comes without fittings so you can add whatever tri-clamp accessories best suit your needs. These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Three welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last.   SKU Size Kettle ID (in.) Height (in.) BE581 10 13.78 16.54 BE582 15 15.75 18.90 BE583 20 17.72 21.26 BE584 30 19.69 23.62 BE585 50 23.62 28.30  

Read more less

BrewBuilt CIP Spray Ball for use with X-Series Uni Conicals or any stainless steel fermenter with 1.5" tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp spray easily removes soil inside your tank. The long neck design allows the spray ball to reach through tall fittings and ferrules. With a welded 90° elbow inlet, you won't have any trouble with kinked hosing slowing your pump flow and lowering the spray ball's performance. A pump capable of 30-45 psi and 11 GPM is recommended for this product to provide a high pressure cleaning radius of 3.6 ft.

Read more less

Please note: This hood was designed for use with the BrewBuilt CoolStix which has been discontinued. Two of the holes are for an airlock and thermowell, but the third 1/2" hole was intended for the CoolStix and you will need to plug it or utilize it how you see fit. This silicone 3-hole carboy hood is used alongside the BrewBuilt CoolStix. The holes are for a 1/2" CoolStix, an airlock and a carboy thermowell. The holes measure 0.500", 0.413", & 0.375" Compatible with smooth neck carboys only. Does not fit Italian threaded neck carboys.

Read more less

Please note: This stopper was designed for use with the BrewBuilt CoolStix which has been discontinued. Two of the holes are for an airlock and thermowell, but the third 1/2" hole was intended for the CoolStix and you will need to plug it or utilize it how you see fit. This #10 3-hole silicone stopper is used alongside the BrewBuilt CoolStix for Carboys. The holes are for a 1/2" CoolStix, an airlock, and a thermowell. The holes measure 0.500", 0.413", & 0.375" Compatible with Fermonsters and our Plastic PET Carboys listed below under "You Might Also Need".

Read more less

The BrewBuilt Electric Brewing Kettle features an offset welded tri-clamp ferrule for easy installation of the SlingBlade electric heating element. The SlingBlade elements were designed specifically for the BrewBuilt kettles and each element fits the corresponding kettle like a glove, perfectly matching the curvature of the kettle wall and providing the appropriate amount of power for the volume size. The unique crescent-shaped design places the element on one side of the kettle, leaving the opposite side clear for an immersion chiller or other accessories. Positioning the element in this way also promotes a rolling boil that evenly ditributes heat throughout the kettle. You'll love the results you get with the SlingBlade's ultra-low watt density, which won't scorch your wort. The kettle does not come with a power cord so you'll need to provide your own extension cord, or add our watertight On/Off power switch for the most convenient way to power the element. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. This model includes a Butterfly Valve with 1/2" barb. Also available with T.C. x FPT or T.C. x T.C. Ball Valve hardware packs. Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. SlingBlade Heating Elements The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. Kettle Key Features: Three welded T.C. couplers for a lifetime of leak free use 50-gal kettle has four welded T.C. couplers to use with two heating elements Butterfly Valve with 1/2" barb AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling SlingBlade Key Features: Made from Stainless Steel with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15-gallon kettle 30 Amp breaker required for 20 & 30-gallon kettle 50-gallon kettle uses 2 x heating elements and requires 2 x 30 amp circuits SKU Size Element Wattage Kettle ID (in.) Height (in.) BE581B 10 3750 13.78 16.54 BE582B 15 4500 15.75 18.90 BE583B 20 5000 17.72 21.26 BE584B 30 5750 19.69 23.62 BE585B 50 (2) 5750 23.6 28.30   ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***

Read more less

The BrewBuilt Electric Brewing Kettle features an offset welded tri-clamp ferrule for easy installation of the SlingBlade electric heating element. The SlingBlade elements were designed specifically for the BrewBuilt kettles and each element fits the corresponding kettle like a glove, perfectly matching the curvature of the kettle wall and providing the appropriate amount of power for the volume size. The unique crescent-shaped design places the element on one side of the kettle, leaving the opposite side clear for an immersion chiller or other accessories. Positioning the element in this way also promotes a rolling boil that evenly ditributes heat throughout the kettle. You'll love the results you get with the SlingBlade's ultra-low watt density, which won't scorch your wort. The kettle does not come with a power cord so you'll need to provide your own extension cord, or add our watertight On/Off power switch for the most convenient way to power the element. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. This model includes a T.C. x FPT ball valve with oversized 5/8" barb—ideal for using 1/2" ID silicone transfer tubing. Also available with Butterfly Valve or T.C. x T.C. Ball Valve hardware packs. Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. SlingBlade Heating Elements The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. Kettle Key Features: Three welded T.C. couplers for a lifetime of leak free use 50-gal kettle has four welded T.C. couplers to use with two heating elements T.C. x FPT ball valve with 5/8" barb AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling SlingBlade Key Features: Made from Stainless Steel with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15-gallon kettle 30 Amp breaker required for 20 & 30-gallon kettle 50-gallon kettle uses 2 x heating elements and requires 2 x 30 amp circuits SKU Size Element Wattage Kettle ID (in.) Height (in.) BE581A 10 3750 13.78 16.54 BE582A 15 4500 15.75 18.90 BE583A 20 5000 17.72 21.26 BE584A 30 5750 19.69 23.62 BE585A 50 (2) 5750 23.6 28.30   ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***

Read more less

Due to high demand, the ball vale kettle is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   The BrewBuilt Electric Brewing Kettle features an offset welded tri-clamp ferrule for easy installation of the SlingBlade electric heating element. The SlingBlade elements were designed specifically for the BrewBuilt kettles and each element fits the corresponding kettle like a glove, perfectly matching the curvature of the kettle wall and providing the appropriate amount of power for the volume size. The unique crescent-shaped design places the element on one side of the kettle, leaving the opposite side clear for an immersion chiller or other accessories. Positioning the element in this way also promotes a rolling boil that evenly ditributes heat throughout the kettle. You'll love the results you get with the SlingBlade's ultra-low watt density, which won't scorch your wort. The kettle does not come with a power cord so you'll need to provide your own extension cord, or add our watertight On/Off power switch for the most convenient way to power the element. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. This model includes a T.C. x T.C. ball valve with 1/2" barb. Also available with Butterfly Valve or T.C. x FPT Ball Valve hardware packs. Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. SlingBlade Heating Elements The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. Kettle Key Features: Three welded T.C. couplers for a lifetime of leak free use 50-gal kettle has four welded T.C. couplers to use with two heating elements T.C. x T.C. ball valve with 1/2" barb AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling SlingBlade Key Features: Made from Stainless Steel with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15-gallon kettle 30 Amp breaker required for 20 & 30-gallon kettle 50-gallon kettle uses 2 x heating elements and requires 2 x 30 amp circuits SKU Size Element Wattage Kettle ID (in.) Height (in.) BE581C 10 3750 13.78 16.54 BE582C 15 4500 15.75 18.90 BE583C 20 5000 17.72 21.26 BE584C 30 5750 19.69 23.62 BE585C 50 (2) 5750 23.6 28.30   ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***  

Read more less

The BrewBuilt™ HLT Controller allows you to control a 208-240V heating element up to 30 amps based on temperature. Perfect for keeping your sparge and mash water up to temp. This controller works by turning the burner power on and off at 100% power until it reaches the temperature setpoint. Features industrial-style power switches, and a 1/6 DIN Controller mounted on a splash resistant stainless steel enclosure. Pre-cut mounting holes allow you to hang the controller on your brew stand or on the wall at eye-level. L6-30 connections with 4 ft. cords on either end. Uses a 9' stainless braided PT-100 temperature sensor. Compatible with all 208-240V elements, 30 amps and lower, with L6-30 connections. The HLT Controller includes a contactor to fully shut off both legs when you throw the power switch, making the free end of the cord safer when the element is not plugged in. If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.   **Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**  

Read more less

Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 2 is designed to cool fermentations in small vessels or barrels. It can be used with any vessel/fermenter/tank/barrel that has a glycol jacket or submersed cooling snake/coil/rod. This chiller features 2 built-in submersible pumps with independent digital temperature controllers, allowing you to control the temperature of 2 separate fermentation or storage vessels at once. Each digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature.  Compatibility The Max 2 can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following: Speidel - Speidel tanks with optional cooling jackets.    Barrels - If you use our barrel snake. This can be particularly attractive for a white wine ferment in a barrel. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, how the tank is insulated, and what the ambient temperature is. Cold stabilizing always requires the most energy and requires well insulated tanks. We are currently experimenting with capacities but can provide this rough guide to get you started.   1 - 40 Gallon Tank or Barrel 2 - 10-20 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 2 built-in submersible pumps with independent digital controllers Pump controller reads in °F / °C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 17 L / 4.5 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 500 Watt/1700btu Refrigerant: R600a Voltage: 110V Dimensions: 19" x 12" x 17.5" Wheels not included   Note: The new model includes a sightglass that is connected via two plastic Duotight tees.  The tees can be attached onto the push tubes on the front of the unit. The sight glass can be fitted between the two tees and plugs need to be inserted on the outward facing openings.  Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.  

Read more less

Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels or barrels. It can be used with any vessel/fermenter/tank/barrel that has a glycol jacket or submersed cooling snake/coil/rod. This chiller features 4 built-in submersible pumps with independent digital temperature controllers, allowing you to control the temperature of 4 separate fermentation or storage vessels at once. Each digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature.  Compatibility The Max 4 can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following: Speidel - Speidel tanks with optional cooling jackets.    Barrels - If you use our barrel snake. This can be particularly attractive for a white wine ferment in a barrel. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, how the tank is insulated, and what the ambient temperature is. Cold stabilizing always requires the most energy and requires well insulated tanks. We are currently experimenting with capacities but can provide this rough guide to get you started.   1 - 60 Gallon Tank or Barrel 2 - 15-30 Gallon Tanks 4 - 5 to 15 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.    

Read more less

This insulated tubing kit was developed specifically for the BrewBuilt Jacketed Conical. It has all the fittings needed to connect an IceMaster Glycol Chiller to the conical jacket's 1.5" tri-clamp inlet and outlet—plus premium quick disconnects with shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet. Insulated tubing will now only provide increased chilling efficiency, it will also eliminate line sweating so you don't need to wipe up puddles of condensation that might collect on your brewery's floor during fermentation or cold crashing. Kit Includes: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb 2 - High Temp Plastic Male QDs w/ 1/2" MPT 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters

Read more less

Upgrade standard and Plus model X-Series conicals with increased cooling performance Chill down to cold crashing temps when used with glycol and insulation; compatible with any vessel with a 4" T.C. opening Keg Connects and Floating Racking Buoy enable you to pressure transfer the clearest beer at the top of your fermenter 1.5" tri-clamp ferrule for use with additional T.C. accessories like the Pressure Fermentation Kit or Hop Bong Sanitary all stainless steel construction with 3/8" OD inlet/outlet for glycol connection Upgrade your standard model X-series conical with the ultimate in-solution chilling coil—the BrewBuilt Ludicrous Coil! Temperature control is one of the most important aspects of a healthy, happy fermentation. When your fermenting beer gets too hot, the yeast will likely impart off-flavors that can easily overwhelm the taste of your finished beer. The Ludicrous Coil offers a ludicrous amount of surface area (which means more cooling capacity) compared to other chilling coils you'll find. Not only does it manage your fermentation temperature with ease, the Ludicrous Coil has the capacity to chill beer to cold crashing temperatures when used with glycol and insulation. A truly unparalleled unit when it comes to in-solution chilling. You will also need a cold water source to provide the cooling solution. For maintaining ale temperatures, a cooler or bucker of ice water is sufficient in most cases and this method works well with the BrewBuilt Chiller Pump Kit. For maintaining lager temperatures or cold crashing, we recommend the IceMaster Max 2 Glycol Chiller and the Insulated Tubing Set. Sanitary all stainless steel construction with 3/8" OD inlet/outlet. Compatible with 3/8" ID flexible tubing & hose clamps or 9.5mm Duotight adapter. Specifications: Size Coil Height Float Tubing Length 7/14 Gal 18.5" 24" 27 Gal 24" 30" 38 Gal 33" 39"  

Read more less

Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. To monitor your mash temperature, we recommend the 1.5" T.C. Thermometer with 6" probe for better grain bed penetration. 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. We do not recommend converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

Read more less

The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below. Features: Made from Incoloy alloy with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components Specs: 240 Volt L6-30 plug Single Phase 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 22 & 31 gal element 50-gallon kettle requires 2 x BE538 and 2 x 30 amp circuits SKU Kettle Vol. Wattage Length Radius Min. Kettle Ø BE535 10 gal 3750 13.25" 6.3" 13.75" BE536 15 gal 4500 16.75" 7.3" 15.75" BE537 22 gal 5000 17.25" 8.3" 17.75" BE538 31 gal 5750 19.5" 9.3" 19.75" Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve. ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***  

Read more less

This watertight power switch is the easiest way to power the your heating element. Features 5 ft. input and output cords with molded LP6-30P ends. Suitable for 220V 30AMP circuits.  

Read more less

The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt conical fermenters and tri-clamp kettles. 1.5" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel   Please Note: 2" valve shown as example photo. Updated images coming soon.

Read more less

The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt X3 Conical's 3" T.C. bottom port. Not compatible with BrewBuilt X1 or X2 Uni Conicals which feature a 2" bottom port. 3" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel  

Read more less

A sealed pressure gauge is the most sanitary and safest solution for your needs. Designed to prevent krousen from plugging the gauge, it ensures longer-lasting performance and unparalleled reliability. This 1.5" tri-clamp pressure gauge is included with the BrewBuilt™ Kit for Fermenting Under Pressure but can be used with any stainless steel conical fermenter with 1.5" T.C. ports. Liquid filled gauges offer better performance and longer lifespan compared to dry gauges. Dial face reads in both psi and BAR. Sealed, liquid filled pressure gauge 0-30 psi 0-2.05 BAR 1.5" tri-clamp connection Made from 304 stainless steel  

Read more less