Products

OEM replacement red silicone malt pipe gasket for Speidel 20 l Braumeister (all generations).

Read more less

This is the replacement gasket for the bottom of your Braumeister's Malt Pipe. This piece is easy enough to lose, and will eventually need to be replaced due to normal wear and tear.

Read more less

This is the replacement mesh screen used in the malt pipe of the 500L Braumeister. This is not the stainless screen, and is only (1) nylon mesh screen.

Read more less

This is the replacement gasket for the bottom of your 50 l Braumeister's Malt Pipe. This piece is easy enough to lose, and will eventually need to be replaced due to normal wear and tear.

Read more less

Replacement Impeller for ITT/Lowara Pump in the 20 L and 50 L Braumeister.

Read more less

Replace a lost or broken tube for your 200L Braumeister with this 2m transfer tubing with connectors. 6 bar pressure limit 275 degree F temperature limit 25mm inner diameter 38mm outer diameter

Read more less

The Braumeister by Speidel is an amazing brewing system, allowing all-grain electric brewing in a compact, all-in-one design.  Now, the Braumeister can provide an even more ideal brew day, by controlling the entire brew process from your Windows 7 or higher device!  The Braumeister Mobile Wifi Unit is a modular internet connectivity device from Speidel, displaying temperatures and  times, running all aspects of the system, as well as updating firmware as released! Supervises the brewing process within the wireless local area network via a wireless internet router Updates the Braumeister control system to the latest software (firmware) Works with all 10L to 500L Braumeisters with a 2015 control unit or later Network standard: IEEE 802.11 b/g/n Requires PC with at least windows 7 or higher Please Note: This unit will only function on Speidel Braumeisters with Generation 2 Black Controllers (2015+). 

Read more less

Bravo™ is an excellent bittering hop that has become popular with American craft brewers. Known for a floral, fruity, and slightly spicy aroma. The high alpha bitterness is balanced by a smooth finish. Try Bravo™ in Pale Ales, IPAs, Stouts or even Barley Wines. Hop Statistics Alpha Acids: 14.0 – 17.0% Beta Acids: 3.0 – 5.0% Alpha-Beta Ratio: 2.8 - 5.67 Cohumulone: (% of alpha acids): 29 – 34% Total Oils in mls per 100 grams dried: 1.6 – 2.4 Storage(% alpha acids remaining after 6 months storage at 68° F) 60 – 70% Similar Hop Varieties: Apollo, Magnum Bravo™  is a  trademark owned by  S. S. Steiner, Inc  

Read more less

Discover the comforting richness of our Brazil Minas Gerais Cerrado, Natural Processed green coffee beans. Grown in the heart of Brazil's Cerrado region, these beans, naturally processed, deliver a classic Brazilian profile with enhanced sweetness and body.   Cupping Notes: Flavor: Expect a sweet and nutty profile, with prominent notes of roasted almonds and hazelnuts. A creamy milk chocolate sweetness is complemented by hints of dried fruits, such as raisins and dates. Subtle notes of molasses and brown sugar add depth. Body: A full, creamy body with a smooth, velvety mouthfeel. Aroma: Aromas of roasted nuts, dark chocolate, and a sweet, caramel-like fragrance. Origin: Minas Gerais, Cerrado, Brazil Altitude: Varies, typically 800-1300 meters Varietal: Various (typically Mundo Novo, Catuai, Iapar) Process: Natural Processed   Key points about Natural Processing in Brazil Cerrado: Natural processing allows the coffee cherries to dry with the fruit intact, resulting in a sweeter, heavier-bodied cup. Brazilian natural coffees often exhibit prominent nutty and chocolatey notes, making them a popular choice for espresso blends. The Cerrado region is well known for consistent and reliable coffee production.

Read more less

Replacement 3/8 inch ball valve and racking arm for the Brew Bucket and Brewmaster Bucket. Brewers grade 304 stainless construction. Comes with an external o-ring that seals between the valve and bucket along with an internal o-ring (inside the ball valve) for connecting the racking arm. 3/8 in. tubing works great with a hose clamp and this valve, or use 5/16 in. for a tighter fit.

Read more less

Replacement set of O-rings for Ss Brewing Technologies Brew Bucket ball valve and racking arm.

Read more less

Ss Brewtech Brew Bucket Mini replacement lid. Comes with a gasket and 17mm punched hole for an airlock or tubing. Made from 304 stainless steel.

Read more less

A properly controlled fermentation temperature is critical to producing quality beer. The Fermentation Temperature Stabilization System (FTSs) is the result of many napkin sketches and applying thermodynamics to advanced brewing practices. The system is elegant in it’s simplicity yet incredibly efficient. The FTSs uses a precision temperature controller that constantly monitors the temperature of your fermentation to within 1° of its set point. When the temperature of your beer varies by over 1° the system kicks in and circulates your chill source liquid through the chiller coil until temperature is stabilized. Your chill source can be as simple as a cooler with ice or as sophisticated as our Ss Glycol Chiller. Alternatively if you need to warm your beer, the system is capable of circulating warm water through the coil to bring temperatures up. If your setup requires temperatures to be corrected both up and down, check out our FTSs² Chilling and Heating system!

Read more less

Johnson. Easy to read book about the basic chemistry of brewing. Uses nontechnical language to explain the chemical reactions at each stage of the brewing process and how to avoid potential problems.

Read more less

Pack of six bolts to connect two brew cubes together.

Read more less

Designed to mount an eController to a Brew Cube. Additionally, the Side Shelf which measures 270mm x 270mm can be use to hold a RIMS or other accessory. Please select your controller size as the mounting plates are different widths. *3V Mount shown in photo

Read more less

The Brew Cube | Hose Hanger is designed to be mounted to the side of a Brew Cube and used to hang hoses and other accessories from the Brew Cube. Includes mounting hardware. The Garden Hose Hanger can be used to coil up a garden-style hose for easy brew day access. The U-Hook Hose Hanger can be used to rest accessories like tubing, mash paddles, and gloves.

Read more less

Designed to be used to connect two brew cubes of different heights together. For two cubes of equal height simply use the Brew Cube | Connection Bolts.

Read more less

Leg extensions to add 12" of height to a Brew Cube. Can be paired with Brew Cube | Shelf

Read more less

Pegboard Tool wall designed to be mounted to the side of a Brew Cube. Available in 12" and 24". NOTE: The 24" version is designed to be used with leg extensions.

Read more less

Designed to mount a pump to Brew Cube | Perforated Shelves. The plate is designed with two pump mounting patterns: 66.68mm x 60.20mm | Fits Chugger Pump and other home brew pumps 93.41mm x 71.91mm | Fits Chugger Max Pump

Read more less

Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes. Perforated Shelf can be used to mount pumps and accessories. *Note these will not work as top plates.

Read more less

The Brew Cubes started as a side project for the Engineering team. We wanted a modular system for testing and prototyping. The Brew Cubes gained popularity internally, and we decided we had to make them available to homebrewers. 19.75" x 19.75" x 17" Modular Design The Brew Cubes started as a side project for the engineering team. We needed a modular system for testing and prototyping a variety of homebrew equipment configurations without fabricating custom brew stands for each build. They quickly gained popularity internally for their modularity and flexibility. The Brew Cubes are designed to grow alongside the brewer's equipment needs and skill level; there's really no right or wrong way to build a brewery, and that's where the modular design of the Brew Cubes shines. The core of the Brew Cube is the base kit, as shown in the exploded view. From there, any variety of shelves and accessories can be added on. We'll have many of the core accessories available immediately, but we view this as a long term platform and intend to introduce thoughtful additions to the product line over the coming months and years. Unlimited Flexibility From stands and carts to parts racks and shelves, flexibility is at the heart of the Brew Cube's design. Every brewer and brewery has different needs, that's why there's no right or wrong way to use Brew Cubes. Designed to bolt together, it's easy to string three or more cubes next to each other, or add optional shelving, leg extensions, and peg walls for near-endless customization. Pro Inspiration for the Home Brewer When designing the perfect homebrew rig, we took inspiration from some of the best and most sought after pro features our team has been engineering into our larger brewhouses. From the dual pump architecture to the newly patented valve tree, Brew Cubes can unlock the full potential of your Ss Brewtech equipment. 3V eBrewing setup shown in example photo: (3) Brew Cubes (2) Brew Cube | Connection Bolts Brew Cube | Valve Tree 3V eController with Brew Cube eController Mount (2) eKettles InfuSsion Mash Tun RIMS (2) TC Pumps Various hose barbs, valves, silicone tubing, and fittings

Read more less