Products

An easy drinking beer with a light color and low ABV. Citrus and tropical fruity hop character on full display Includes Magnum and Citra® hops Estimated ABV: 4.4% Estimated IBUs: 31 Makes 5 gallons of finished beer One of our most refreshing ingredient kits available!  Citra® Session Pale Ale is an easy drinking beer with a light color and low ABV. With a fairly basic malt bill and clean bitterness from Magnum hops, the flavor profile of Citra® is really able to shine through with all of its citrus and tropical fruity goodness. If you're looking for a clean, hoppy beer that allows you have a few without the IPA buzz, then the Citra® Session Pale Ale should definitely be on your radar! Makes 5 gallons Estimated Original Gravity: 1.040-1.045 SRM (Color Range): 5 IBUs: 31 Estimated Alcohol Percentage: 4.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.   Citra® is a registered trademark owned by Hop Breeding Company.  

Read more less

An easy drinking beer with a light color and low ABV. Citrus and tropical fruity hop character on full display Includes Magnum and Citra® hops Estimated ABV: 4.4% Estimated IBUs: 31 Makes 5 gallons of finished beer One of our most refreshing ingredient kits available!  Citra® Session Pale Ale is an easy drinking beer with a light color and low ABV. With a fairly basic malt bill and clean bitterness from Magnum hops, the flavor profile of Citra® is really able to shine through with all of its citrus and tropical fruity goodness. If you're looking for a clean, hoppy beer that allows you have a few without the IPA buzz, then the Citra® Session Pale Ale should definitely be on your radar! Makes 5 gallons Estimated Original Gravity: 1.040-1.045 SRM (Color Range): 5 IBUs: 31 Estimated Alcohol Percentage: 4.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.   Citra® is a registered trademark owned by Hop Breeding Company.  

Read more less

Used primarily in sanitizing solutions to lower pH, therefore making the SO2 solution more effective. Use 1 tbsp per gallon along with 1 tbsp meta per gallon. Citric is not added directly to must prior to either primary or ml fermentation as its metabolism can lead to volatile acidity. A rough approximate of weight is 1 tsp = 4 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.  Domestically produced in the USA. 

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! As the name implies, this IPA absolutely explodes with citrusy hop flavors and aromas Includes Magnum, Columbus, Citra®, Centennial, and Falconer's Flight hops Estimated ABV: 7.3% Estimated IBUs: 55-60 Makes 5 gallons of finished beer Brought to us by Nate Smith, this IPA truly is a hop bomb! With almost 10oz. of hops in a 5 gallon batch, this is one that hop-heads definitely need to try. Falconer's Flight, Citra®, Magnum, Columbus and Centennial all play a role in the clean bitterness and amazing hop aroma and flavor that you get out of this IPA. Nate is a participant in the Brewing Network's Sunday Session podcast, an active member of D.O.Z.E. (Diablo Order of Zymiracle Enthusiasts) Homebrew Club, and has been homebrewing for over 14 years. Needless to say, Nate's familiar with the scene! Nate's Recommendations on the Citrus Bomb IPA: Use WLP001 (with a starter) or WY1056 yeast. Plan on an 18-20 day fermentation: 10 Days at 65F, then raise to 68F on the 10th.  Add your dry hops 5 days later, and rack 3-5 days after that.  *NOTE* Fining with biofine is recommended! Makes 5 gallons Estimated Original Gravity: 1.066-71 SRM (Color Range): 7 IBUs: 55-60 Estimated Alcohol Percentage: 7.3%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.   Citra® is a registered trademark owned by Yakima Chief Hops, LLC.    

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! As the name implies, this IPA absolutely explodes with citrusy hop flavors and aromas Includes Magnum, Columbus, Citra®, Centennial, and Falconer's Flight hops Estimated ABV: 7.3% Estimated IBUs: 55-60 Makes 5 gallons of finished beer Brought to us by Nate Smith, this IPA truly is a hop bomb! With almost 10oz. of hops in a 5 gallon batch, this is one that hop-heads definitely need to try. Falconer's Flight, Citra®, Magnum, Columbus and Centennial all play a role in the clean bitterness and amazing hop aroma and flavor that you get out of this IPA. Nate is a participant in the Brewing Network's Sunday Session podcast, an active member of D.O.Z.E. (Diablo Order of Zymiracle Enthusiasts) Homebrew Club, and has been homebrewing for over 14 years. Needless to say, Nate's familiar with the scene! Nate's Recommendations on the Citrus Bomb IPA: Use WLP001 (with a starter) or WY1056 yeast. Plan on an 18-20 day fermentation: 10 Days at 65F, then raise to 68F on the 10th day.  Add your dry hops 5 days later, and rack 3-5 days after that.  *NOTE* Fining with biofine is recommended! Makes 5 gallons Estimated Original Gravity: 1.066-71 SRM (Color Range): 7 IBUs: 55-60 Estimated Alcohol Percentage: 7.3%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.     Citra® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

The VineCo Niagara Mist lineup offers a crisp, easy-drinking alternative to more traditional winemaking kits. These fruit-forward wine kits are all about capturing the refreshing essence of juicy ripe fruit. Light and crisp and offered in a full assortment of reds, whites, and rosés. Niagara Mist wines are easily enjoyed on their own, but also work well as the base for punches or wine spritzers. Citrus Sangria features is bursting with flavors of tangy citrus, juicy papaya and fresh tropical fruit on the finish. A light-bodied, sweet white wine with an alcohol level of 6% by volume. Citrus Sangria Citrus, papaya, tropical fruit Sweetness: Sweet Oak: None Body: Light ABV: 6.0% Kit Volume: 6 L Approximate Yield: 23 L Ready to bottle in 4 weeks  

Read more less

The two most popular sizes of our two most popular cleaning and sanitizing products. Keeping your equipment cleaned and sanitized is an important practice, whether you're crafting beer, making wine, or roasting and brewing your own coffee beans. Stock up on PBW and Star San at the same time, and save a couple bucks along the way! PBW stands for Powder Brewery Wash, which is a non-hazardous buffered alkaline brewery cleaner. PBW out performs other more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals.  Comes in a jar with screw top lid. Star San is an acid based sanitizer that is quick, odorless, tasteless and safe for most materials except softer metals. Use of 1 oz of Star San per 5 gallons of water and a contact time of 1 minute makes Star San very economical and convenient. Kit Includes: PBW - 1 lb (CL25A) Star San - 32 oz (CL26A)

Read more less

Keeping your equipment clean and sanitary is the first step toward making fantastic wine, but the number of products to choose from can make your head spin. That's why we put together a basic cleaning and sanitizing kit to set novice wine makers on the path to success. Star San Star San is an acid based sanitizer that is quick, odorless, tasteless and safe for most materials except softer metals. Use of 1 oz per 5 gallons of water and a contact time of 1 minute makes Star San very economical and convenient. Craft Meister Alkaline Brewery Wash Does your cleaner power through dirt in cold water? Craft Meister Alkaline Brewery Wash does! This versatile and powerful brewery cleaner dissolves quickly and cleans rapidly in cold water in addition to hot water. Ideal for overnight soaking as the solution does not lose effectiveness over time like oxygen based cleaners such as Oxi Clean. Craft Meister Alkaline Brewery Wash will not leave a white chalky film on your equipment like most oxygen based cleaners and rinses away with ease. Plastic Syringe This plastic syringe is perfect for measuring out small amounts of liquid. Star San is so concentrated that the dilution rate is only 1 ounce per 5 gallons of water. This can be done with ease thanks to the volume markers on the bottle, but what about when you want to make a mini batch of sanitizer? Instead of making 2.5 or 5 gallons of sanitizer to fill your spray bottle from, simply add 2 ml of Star San directly to the 8 oz spray bottle, fill with water and you're all set. Spray Bottle A bucket full of sanitizer is great for soaking equipment, but not every job requires that much solution. This 8 oz Sanitizing Spray Bottle is the answer! Great for a quick spray on hands, fermenter valves, sample takers, etc. either before or immediately after use. Use the plastic syringe to add 1/2 tsp (2 ml) of Star San and fill with water. Sanitizer will last up to 1 week before it is ineffective. Kit Includes: Star San - 16 oz (CL26E) Alkaline Brewery Wash - 1 lb (CL41A) Plastic Syringe - 10 ml (MT118) Spray Bottle - 8 oz (CE96)

Read more less

Cleaning balls are super handy for scrubbing the inside of your transfer tubing. Simply insert into the end of the suction-side tubing connected to your pump and turn the pump on. Be careful not to draw the ball in to the pump head. For the outlet side of the pump, disconnect the tubing from the pump, insert the ball, reattach and turn on the pump. for best results repeat several times on each side. If stains persist, fill your lines with a warm PBW solution and let sit for about an hour before scrubbing again. Available in sizes for 1/2", 1", 1.5" and 2.5" inner diameter tubing.

Read more less

Candi Syrups are premium flavoring sugars to enhance the flavor of authentic Belgian-tasting beers Flavor: Very subtle "citrusy" flavor Recommended for Saisons, Triples, and Golden Ales Simplicity is a near perfect balance of highly fermentable sugars. It is our unique blonde Belgian style Candi Syrup unlike anything available on the market today. Excellent for Saisons, Triples, and Golden Ales. It is readily fermentable and creates a refreshing subtle flavor that is always on the periphery of your palate. Some say it has a faint "citrusy" flavor and others say is has a mild honey palate. Simplicity Candi Syrup™ is much to be preferred over refined sugar due to it's superior fermentability. One pound of Simplicity will add an estimated SRM of .15L to 6 gallons of wort. This is solely used for increasing the gravity and making a more fermentable wort by adding smaller chains of dissolved sugar. Color: 1 SRM / 1.3°L PPG: 1.032 Note: This product may crystallize in cold temperatures. To restore its original consistency, warm the bottle by soaking it, or warm it in a dry environment at 140°F (60°C). Please ensure the product is stored at or above 68°F (20°C).

Read more less

Soft Candi Sugars can be preferred over candi syrups for their ease of storage and boil addition. Blanc is a neutral white soft Candi Sugar ideal for Tripels, Saison and Biere de Garde or anywhere increased gravity is required.

Read more less

Everything you'll need to know about how to brew your favorite commercial beers from the likes of Samuel Adams, Moose Drool and Magic Hat #9. Styles ranging from the popular and hoppy IPA's of today to the storied stouts, brown ales, belgian ales and wheat beers.

Read more less

Clos is a yeast strain isolated from the Priorat region of Spain. Clos was chosen for its ability to re-enforce structure while emphasizing aromatic complexity and mouthfeel. Sweet red fruit (cherry), with pepper and chocolate notes are typical of what Clos brings to a fermentation. With hot climate/high Brix fruit, Clos is a great choice for its high alcohol tolerance (17%), low Nitrogen needs and short lag phase. Clos also does well with higher fermentation temperatures (max 95 F) and shows a good compatibility with MLF. Highly recommended for Syrah, Petite Syrah, Grenache, Tempranillo and Carignane. Click here for a PDF of the MoreWine Manual on re-hydrating wine yeast. Click here for a PDF of the MoreWine Yeast and Grape Pairing Guide.

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Cloudburst Brewing A delicious IPA that is beautifully aromatic and very easy drinking Includes Chinook, Citra®, Cascade, and Mosaic® hops Estimated ABV: 6.5% Estimated IBUs: 57 Makes 5 gallons of finished beer Flashing Lights is a delicious IPA that is bittered with Chinook and heavily dosed with Citra®, Mosaic® and Cascade. Beautifully aromatic and very easy drinking, this is a definite crowd pleaser! Flashing Lights is one of the many innovative rotating beers brewed by Cloudburst Brewing. Cloudburst Brewing in Seattle Washington is one of our favorite craft breweries. We met Steve Luke (owner and head brewer) up at the Yakima Fresh Hop Ale Festival and were thoroughly impressed with his beer.  After tasting every beer at the festival, there was no question that the Cloudburst Wet Hop IPA was best in show.  Steve, being an ex-homebrewer, was happy to help MoreBeer! with one of his famous IPAs.  If you are not familiar with the amazing Cloudburst IPAs he makes, you might be familiar with another IPA of his, Elysian Space Dust. Cloudburst brews up a constantly rotating selection of flavorful and unique brews. Stop by the tasting room the next time you are in Seattle; until then, you'll  just have to brew up some Flashing Lights! Makes 5 gallons Estimated Original Gravity: 1.062-67 SRM (Color Range): 5 IBUs: 57 Estimated Alcohol Percentage: 6.5% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.   Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Cloudburst Brewing A delicious IPA that is beautifully aromatic and very easy drinking Includes Chinook, Citra®, Cascade, and Mosaic® hops Estimated ABV: 6.5% Estimated IBUs: 57 Makes 5 gallons of finished beer Flashing Lights is a delicious IPA that is bittered with Chinook and heavily dosed with Citra®, Mosaic® and Cascade. Beautifully aromatic and very easy drinking, this is a definite crowd pleaser! Flashing Lights is one of the many innovative rotating beers brewed by Cloudburst Brewing. Cloudburst Brewing in Seattle Washington is one of our favorite craft breweries. We met Steve Luke (owner and head brewer) up at the Yakima Fresh Hop Ale Festival and were thoroughly impressed with his beer.  After tasting every beer at the festival, there was no question that the Cloudburst Wet Hop IPA was best in show.  Steve, being an ex-homebrewer, was happy to help MoreBeer! with one of his famous IPAs.  If you are not familiar with the amazing Cloudburst IPAs he makes, you might be familiar with another IPA of his, Elysian Space Dust. Cloudburst brews up a constantly rotating selection of flavorful and unique brews. Stop by the tasting room the next time you are in Seattle; until then, you'll  just have to brew up some Flashing Lights! Makes 5 gallons Estimated Original Gravity: 1.062-67 SRM (Color Range): 5 IBUs: 57 Estimated Alcohol Percentage: 6.5% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.   Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.  

Read more less

Cluster hops offer a smooth, neutral, bitterness complimented by a spicy and floral aroma with fruity notes. A great choice in Lagers, Stouts, and Porters. Hop Statistics Alpha Acids: 5.5 – 8.5% Beta Acids: 4.5 – 5.5% Alpha-Beta Ratio: 1 - 1.88 Cohumulone: (% of alpha acids): 36 – 42% Total Oils in mls per 100 grams dried: 0.4 – 0.8 Storage(% alpha acids remaining after 6 months storage at 68° F): 80 – 85% Similar Hop Varieties: Galena

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your beverage line. Barb is 1/4". 3/16" beverage tubing is recommended. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your beverage line. Flare is 1/4" Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system. Internal Check Valve protects your system from liquid back flow! Made in Germany and assembled in the USA by CMB. Extremly high quality for years of service. NSF Approved for Food Grade Service!

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your gas line. Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your gas line. Flare is 1/4" Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

Add the perfect amount of restriction to any beer line to reduce foam. Eliminates the need for flow control in the faucet itself. Great for use in Jockey Boxes or anywhere you are serving beverages with varying levels of carbonation.    If you are currently using a long length of tubing to increase restriction you can now shorten your tubing. A shorter line holds less beer. Beer that is stored in the line tends to warm up quicker, adding to foaming issues, and is more likely to stale from bacteria present in the line.    Features: Adjust flow with an included Allen wrench (keeps unauthorized people from adjusting the unit) Eliminate foam from beer or slow down / speed up other beverages Fix systems with issues without having to replace lines or faucets Take the guesswork out of line restriction.  You can use shorter lines and still have perfect restriction.  You can also use larger ID lines and adjust as necessary. Easy to disassemble for cleaning, clear body for easy monitoring Made in Germany by CM Becker from Food grade plastic and stainless steel parts! Comes Equipped with 2 x 3/16" Barbs Easy to install to any existing beer line (cut line and install two clamps)

Read more less

This inline check valve can be used with any gas-in ball lock or pin lock flared disconnect. Allows gas to flow through while preventing the backflow of liquid. Made in Germany and assembled in the USA by CM Becker.

Read more less