Beer Making

This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per hour. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.   We recommend this pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons.   Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord Temperature rating: 1-35 degree Celsius

Read more less

Getting into kegging has never been more affordable! Grab this 5-gallon ball lock keg for less than half the cost of a stainless corny keg of the same size! Transparent Oxebar Mono plastic makes it easy to see how much beer you have left in the keg. Especially handy when dispensing on the go Floating dip tube comes standard—a huge upgrade over traditional ball lock kegs. Draw the clearest beer inside the keg while leaving sediment behind Oxebar Mono Kegs are made from Nylon impregnated PET and Polyketone (POK) fittings for superior oxygen barrier properties compared to standard PET plastic Wedge seals on the Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used Lower total oxygen pickup compared to a standard corny keg with silicone lid seal This 5-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. The included Ball Lock Tapping Head comes complete with Red & Yellow Ball Lock Caps for gas and beverage, floating dip tube with filter screen, and pull-ring PRV. Molded handles make it easy to remove the tapping head for cleaning and also allow you to stack the kegs on top of each other, even with your ball lock quick disconnects in place. Being made from the Mono Barrier PET Polymer Matrix, rather than stainless steel, this keg is lightweight and an ideal choice for draft dispensing on the go. But with all the key features of a standard corny homebrew keg, plus the added feature of the floating dip tube, the Oxebar Mono Keg makes for an affordable keg option for home dispensing as well. Fit up to 3 of these bad boys in a KOMOS Standard or Deluxe Kegerator, or fit up to 6 in the KOMOS Double-Wide Kegerator. Includes: 20L Amber Mono Barrier PET Oxebar Keg Dual PCO1881 Lid Assembly with Oxebar Black Handles Green Pull Ring PRV (65 PSI) Silicone Floating Dip Tube w/ Filter Attachment Red & Yellow Ball Lock Quick Disconnect (QD) Caps Specs: Height: 25.1" Diameter: 9.2" Volume: 5.28 Gallons Fit up to 3 kegs in the KOMOS Standard & Deluxe Kegerators NOTE: Oxebar Mono kegs are marked with a manufacture date. 2 years after production, and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the keg is holding pressure. Hydro test instructions are below. You will also need a 100 PSI Gray PRV to perform the test. Fill the keg to the brim with room temperature water Replace the Green PRV with a Gray PRV rated to 6 BAR or higher Pressurize the tank to 6 BAR (87 psi) Hold the keg at 6 BAR for 1 minute Release the pressure and immediately remove the Gray PRV and swap back to the Green PRV If leaks or potential points of failure are found, replace the tank KegLand Part Number: KL36054   NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.

Read more less

Our take on unlocking the additional readings when used together: In addition to the individual benefits and readings that both machines offer, the EasyDens and SmartRef can be used together to gain the addtional following measurements in finished beer or wine. These measurements do not require that you have an upfront original measurements.  Beer: Alcohol by volume, Alcohol by weight, Final Gravity, Original Gravity (wow), and Real Extract Wine: Alchol by volume and Residual Sugar (very cool) The EasyDens and SmartRef device can now be used together to provide additional measurement parameters Determines alcohol content using density and refractive index measurements Quick results in under 5 seconds Determiniation of wort extract content Fermentation tracking and visualization Automatic temperature correction (ATC) Precise alcohol content determination (0.5% v/v) Unlimted ABV measurements with app subscription Measure finished beer and receive results for: ABV Real extract Original gravity Final gravity Suitable for standard and strong beer New App Features & Updates: Sync all data to the cloud Unlimited ABV measurements with an app account Wine Meister Alcohol & Total Extract in Wine: Get direct results in fermenting or finished kombucha Barcode:  Assign measurement data via barcode scan to a batch Residual Sugar Calculator Brew Meister Alcohol in Kombucha: Get direct results in fermenting or finished kombucha Lab Meister TDS%: Using the SmartRef it is possible to measure TDS% in coffee Extract yield of coffee: A calculator is available that lets you calculate the extract yield for the different types Percolation brewing method (eg. Espresso, V60) Immersion brewing method (eg. French press) Mixed phases methods (eg. Aeropress) New measurement units: Now SmartRef support 40+ measurement units New Languages Now supported: English, German, French, Italian, Czech, Portuguese, Turkish, Chinese, Japanese, Spanish Direct ABV determination with the EasyDens & SmartRef Combo Beer: alcohol content (±0.5 %v/v), real extract (±0.2 %w/w), original gravity (±0.8 %w/w) and total extract (±2.0 g/L) Wine: alcohol content (±0.5 %v/v for wines up to 15% and ±1.0 %v/v for wines from 15 to 20 %v/v) Kombucha: alcohol content (±0.5 %v/v) Liquor: alcohol content (±0.5 %v/v) Application specific in-app calculators Beer: color calculator, refractometer brix correction, ABV (OG/FG) calculator, converter for gravity, temperature & more Wine & Fruits: brix acid correction, residual sugar calculator, converter for gravity, temperature & more Coffee: extraction and TDS calculator Spirits: converter for gravity, temperature & more Compatible with RAPT Pill & Tilt Hydrometer Measurement data from these devices can be seamlessly integrated into your Brew Meister and Wine Meister batches The EasyDens & SmartRef Beer Combo includes: SmartRef Digital Refractometer: 1x SmartRef 2x Batteries 4x Pipettes EasyDens Digital Density Meter: 1x EasyDens 2x Batteries 1x Syringe 1x Waste hose 1x Adapter luer SmartRef Digital Refractometer | Anton Paar Wide measuring range from 0 to 85 °Brix (0 to 62.7 °P) Accuracy of 0.2 °Brix (0.2 °P) Built-in wort and alcohol correction for beer that is fully configurable Quick readings – results in under 2 seconds Automatic temperature compensation (ATC) Small sample volume requirement (0.4 mL) Free iOS/Android app The SmartRef Digital Refractometer by Anton Paar is a portable smart pocket device suitable for a wide range of requirements. The SmartGuide+, as a feature in the mobile app, automatically checks any errors of ambient light, impurity, and sample behavior during measurement for you. The device offers more than 15 different measurement units with automatic temperature compensation. Depending on your need, SmartRef enables you to measure the extract content of your beer, the sugar content in wine, the sweetness of fruits and vegetables, the moisture of honey, the salt content of your aquarium or pool, and much more. Smart Technology for Consistent Results The SmartRef portable refractometer is used in combination with a free mobile app for Android and iOS via Bluetooth Low Energy and enables intelligent handling of the measurement results. The app permits easy storage, visualization, management, and sharing of measurement data. SmartGuide+ detects and helps eliminate measurement problems through high ambient light detection, continuous checking of prism and sample condition, and more. In addition to the quick measurement mode, measurements in continuous mode allow a more detailed understanding of the samples’ properties. Over-the-air updates keep your digital refractometer up-to-date with the latest features. SmartRef Measurement Details The SmartRef refractometer measures the refractive index of fluids. This allows retrieval of relevant sample properties in a wide variety of applications. Fast temperature stabilization and automatic temperature compensation for measurement results make additional calculations and correction tables obsolete. The unit has an IP66 rating and an easy-to-clean stainless steel sample well. SmartRef supports a one-point zero adjustment with distilled water and requires only a few drops of sample (0.4 mL). SmartRef displays results in under two seconds and has a measurement range of 0 °Brix to 85 °Brix with an accuracy of 0.2 °Brix. High Variety of Measurement Applications Brix refractometer: For wine, juice, honey, sauces, jams, fruits, vegetables, and maple syrup. The SmartRef measures the sugar content in °Brix, °Babo, °Baumé, °KMW, and °Oechsle. Salinity refractometer: SmartRef determines the salt content in your saltwater aquarium and pool in salinity specific gravity (SG 20/20), practical salinity units (PSU), and salinity in parts per thousand (ppt). Beer refractometer: SmartRef shows the extract content of wort in °Plato. Coffee refractometer: Measure total dissolved solids to assess coffee strength and extraction quality. Instantly calculates extraction yield, letting you dial-in strength, acidity, and sweetness for any brew method. Pet Care Meister: Reads urine specific gravity (USG) to help track hydration in cats, dogs, and other large mammals. As a smart device, SmartRef offers a constant expansion of measurement units. All available scales are provided within the app. Technical Specifications: Measuring Range Refractive index (RI) at 20°C: 1.3330 – 1.5040 Brix: 0° to 85° Sample Temperature: 10°C – 100°C (50°F – 212°F) PSU (practical salinity units): 0 – 50 Salinity ppt (parts per thousand): 0 – 150 Salinity S.G. (20/20): 1.000 – 1.114 Accuracy Refractive index (RI): ±0.0003 Brix: ±0.2° Temperature: 0.5 °C (0.9 °F) PSU (practical salinity units): ±2 Salinity ppt (parts per thousand): ±2 Salinity S.G. (20/20): ±0.002 Resolution Refractive index (RI): 0.0001 Brix: 0.1° Temperature: 0.1°C (0.1°F) PSU (practical salinity units): 1 Salinity ppt (parts per thousand): 1 Salinity S.G. (20/20): 0.001 Further Specifications Sample Volume: 0.4 mL Measurement Time: <2 s Automatic Temperature Compensation 20 °C (ATC) %Brix: 10°C – 100°C (50°F – 212°F) Automatic Temperature Compensation 20 °C (ATC) PSU, ppt, S.G. (20/20): 10°C – 40°C (50°F – 104°F) Mobile Operating System: Android and iOS Data Dimensions (L x W x H): 108mm x 64mm x 35mm (4.3" x 2.5" 1.4") Weight (incl. batteries): ~135 g (0.31 lbs) Power Supply: 2x AAA 1.5V LR03 alkaline batteries (included) or AAA NiMH rechargeable batteries Enclosure Rating: IP66 according to IEC 60529 Condition Ambient Temperature: 10°C – 40°C (50°F – 104°F) Air Humidity: 5% RH – 95% RH, non-condensing Battery Lifetime: ~10,000 measurements Storage Temperature: 10°C – 40°C (50°F – 104°F) Interface: Bluetooth™ Low Energy Frequency Band: 2400 MHz – 2480 MHz Transmitter Power: 7.5 dBm max. (5.6 mW max.) Part Material Sample Area: Stainless steel and glass, FKM O-Ring Enclosure Housing: Flame retardant PBT/PC, UL94-V0   The EasyDens by Anton Paar Anton Paar is a leading producer of analytical testing equipment for commercial breweries. Borrowing some technology from their high end machines, the EasyDens digital gravity/alcohol tester is designed for savvy homebrewers and small commercial breweries.  It is a precision gravity/density testing unit which can accurately read gravity with a tiny 2 ml sample at any point in the brewing process.  Alcohol % can also be tracked at any point during fermentation. The unit hooks up to your smartphone via Bluetooth and stores various fermentation "profiles" enabling you to track fermentation progress, alcohol levels, and help know when it's time to keg & drink your beer! See the documents tab for frequently asked questions about the Easy Dens. Features: Take a highly accurate gravity reading at any point in the brewing process even when alcohol is present. Very fast and simple to use Only uses 2ml of sample Automatic Temperature Compensation Connects and displays via free app on your phone or tablet Based on oscillating u-tube principle which is known as world's most accurate testing method Extremely durable Measures in specific gravity and alcohol can be determined with original reading App features graphing for gravity and alcohol App stores batch records (10) and can email a batch record as a .csv for saving. Specifications: Measuring Range   Extract:    –10 %w/w to 40 %w/w Sugar:    –10 °Brix to 80 °Brix Specific Gravity (SG): 0.700 - 1.200 Alcohol:    0 %v/v to 100 %v/v Temperature:    5 °C to 30 °C / 41 °F to 86 °F Accuracy    Extract:    0.3 %w/w Sugar:    0.3 °Brix Specific Gravity (SG): 0.001 Alcohol:    0.5 %v/v Temperature:    0.2 °C / 0.4 °F Resolution   Extract / Sugar / Alcohol:    0.1 %w/w / °Brix / %v/v Specific Gravity (SG): 0.001 Temperature:    0.1 °C / 0.1 °F Additional Specifications: Sample volume:    approx. 2 mL Ambient temperature:    5 °C to 35 °C / 41 °F to 95 °F Storage temperature:    5 °C to 35 °C / 41 °F to 95 °F Humidity Range:    5 % to 90 % relative air humidity, non-condensing Interface:    Bluetooth Low Energy Power supply:    Two 1.5 V LR6 AA alkaline batteries or two AA NiMH rechargeable batteries Battery operation lifetime:    > 40 hours Dimensions:    120 mm × 80 mm × 35 mm / 4.7 in × 3.1 in × 1.4 in Weight (incl. batteries):    200 g / 7 ounces Mobile Operating System:    Android 4.3 and higher; iOS 7.0 and higher Latest Updates to Meister Apps New batch design with a more detailed user interface Integrated beer style database Recipe creation and management Custom measurement values and labels ABV measurement for light beer, hard seltzer, and cider with the EasyDens & SmartRef Combo (in addition to existing support for standard and strong beer, wine, liqueur, and kombucha) Fermentation tracking for wine with SmartRef (previously only possible with EasyDens) Calorie determination for measurements with EasyDens, SmartRef, and the EasyDens & SmartRef Combo in Brew Meister and Wine Meister Tilt Hydrometer and RAPT Pill support in Brew Meister and Wine Meister  

Read more less

If you're tired of losing gas every time you connect or disconnect your Sodastream cylinder to your normal Sodastream cylinder adapter, this new design is what you need. Unlike cheaper Sodastream cylinder adapters, this unit has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adapter. This pin adjustment makes the Sodastream cylinder adapter significantly easier to use. Some adapters require an Alan Key wrench to adjust the pin height, and depending on how worn out your seal is, you may need to adjust this pin periodically. Conventional, cheaper Sodastream adapters also tend to leak gas every time you connect and disconnect them from your regulator or the adapter itself. If you have a Sodastream Cylinder, you can use this adapter to connect it to a CGA320 CO2 Regulator. This is a great choice for mobile draft applications when you don't want to carry around your home draft system's 5 lb or larger CO2 tank. CGA320 Male Thread x TR21-4 Female Thread NOTE: Does not include CO2 regulator or Sodastream Cylinder seen in the example photos. KegLand Part Number: KL24662

Read more less

PCO38 threaded tapping head pairs perfectly with Oxebar Mono PET Kegs for a lightweight, affordable draft dispensing system Dip tube features a filter attachment to keep solids in the keg and out of your glass Includes liquid and gas ball lock posts and pull-ring PRV rated to 36 psi This handy PCO38 Tapping Head assembly is a great way to get into kegging. Using standard homebrew ball lock disconnects, this is a convenient, light weight, robust and inexpensive solution to kegging beer, cocktails, kombucha, wine, and other beverages. This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 4L or 8L Oxebar Mono PET Keg. KegLand utilizes quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both homebrewing and commercial beers. The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (212°F / 100°C). The Ball Lock Tapping Head kit comes with 2.5 BAR (36 psi) PRV, liquid and gas ball lock posts, and dip tube with filter attachment. KegLand Part Number: KL27144   NOTE: The Oxebar Mono Keg shown in the example photos is sold separately.

Read more less

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/8" tubing to 1/2" ID tubing. The barbs are slightly oversized at 10 mm (0.39") and 13 mm (0.51"). Made from 304 stainless steel.

Read more less

Carbon Steel Chuck for Cannular Pro Semi-Auto Can Seamer. This 100mm chuck can be swapped in for the standard chuck so you can change from doing aluminum cans to steel cans. This chuck is not compatible with the standard manual Cannular unit. Kegland Part number: KL16766  

Read more less

Plastic can carriers are an attractive, efficient and environmentally responsible choice for completing your craft beer, soda, juice, or sparkling water canned products. These durable rHDPE plastic carriers protect can tops and increase customer satisfaction. Carriers are easy to apply manually or with an automated solution. Easy release feature makes accessing cans effortless. Carriers nest for easy storage and shipping. Made from 100% post-consumer recycled milk jugs and 100% recyclable. Fully compatible with 16.9 and 11.1 oz Can Fresh Aluminum Cans. 6-Pack Can Carrier Available in Black, White, and Red Made from recycled resin Molded in the USA

Read more less

Nothing is more refreshing that having your own soda water on tap at home.  SodaStream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap.  Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution. KegLand has invented this really easy-to-use keg lid that attaches to a standard ball lock keg.   Setup: Position the keg inside your fridge or kegerator (ideally below 40°F). Attach your beverage draft line to the soda water out post. Attach your gas line to the gas-in post. Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line. On first use, purge the air from the headspace of the keg. Connect the mains water to the water inlet post on the lid of the keg. We recommend also using a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 10-15 psi higher than your regulator set pressure (from Step 4). That's it. This simple unit will give you continuous soda water connected to your mains water. Please note: if you are using a CO2 regulator that uses a corny-style PRV, such as the KOMOS® regulator, you will need to swap out the standard Green PRV with the 0-100 psi Gray PRV so you can raise the pressure above 60 psi. Always check the pressure rating of your keg(s) before swapping the PRV.     KegLand Part Number: KL10955    

Read more less

The KOMOS waterproof kegerator cover is perfect for outdoor use. The front panel can be lifted independently so the kegerator door can be opened without removing the whole cover.  

Read more less

Use the Duotight Flow Stopper while filling kegs, during keg to keg transfers, or fermenter to keg transfers to automatically cut off the flow when the keg is full. Simply attach this device to the output gas post of your keg, then when the keg is full it will prevent further liquid exiting the gas post.   The Flow Stopper pairs perfectly with the BlowTie Spunding Valve, which will enable you to apply head pressure to the keg. This allows you to control the flow speed and reduce the foam generated in the filling process. You will need a short length of 8 mm OD EVABarrier tubing to connect the BlowTie to the outlet of the Flow Stopper.   Includes: 2 x Duotight 8 mm x 5/8" FPT (DUO104) 1 x Duotight 8 mm elbow (DUO107) 1 x Duotight 8 mm x 1/4 in. flare (DUO106) 1 x Ball float 1 x Stainless spring 2 x 8 mm OD EVABarrier joiners 1 x Acrylic sight glass Ball lock fitting and BlowTie spunding valve not included.   Kegland Part number: KL09393  

Read more less

This plastic ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurizable growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This cap can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. When using two ball lock caps, we recommend pairing this red plastic cap with a yellow plastic cap so you can easily identify which caps are being used for liquid or gas. The barb is Duotight compatible. If you'd like to use the cap with 8 mm OD EVABarrier tubing, see DUO100. Specs: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28 mm PCO 1881 Threads Kegland Part number: KL10788

Read more less

A powerful, 304 stainless steel heating element well suited for most kettles. With its weldless design and a diameter of 1.25", it's easy to install. Simply drill a 1.25" hole in your kettle and tightening the nut from the outside. The heating element requires a power cord which can be purchased separately. Electrical connection requires a computer power connection IEC320 C13 to your 110 or 220 v plug). Available in either 1600 watt 110 volt or 2200 watt 220 volt. Features: Food grade, high temperature silicone seal The element itself is 11.5" long, 0.75" diameter Designed for use with 5 gallon batches Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use. Use the 1.25" Hole Saw to drill a hole for this product.   Kegland Part number: KL03513

Read more less

2.3 °L - Briess Malting - Exceptionally high alpha amylase and diastatic power (250) for maximum fermentable yield. (2.4°L)    

Read more less

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01021

Read more less

Due to high demand, the 5 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late October. A new arrival from New Zealand, Nelson Sauvin is sure to delight those looking to impart a unique aroma to their beer. Nelson hops are an excellent dual purpose hop that can be used to produce a punch or sparingly for subtler bittering qualities. The aromas have best been described as resembling a white wine "fruitiness" with fresh crushed gooseberry and grape infused tropical flavors. Ideal for American-style Pale Ales and specialty beers. Hop Statistics: Alpha Acids: 12.0 - 13.0% Beta Acids: 6.0 - 8.0% Alpha-Beta Ratio: 1.5 - 2.17 Cohumulone: (% of alpha acids): ~24% Total Oils in mls per 100 grams dried: ~1.1 mL / 100g Storage(% alpha acids remaining after 6 months storage at 68° F): N/A Similar Hop Varieties: N/A

Read more less

Liquor Quik Essences for making liquors, cordials, and flavored spirits at home. The essence contains no alcohol. Simply add 1 bottle of essence to vodka or neutral spirits, add sugar or glycerine as per the recipe, and enjoy.

Read more less

3 way stainless steel tee with 1/4 in barbed fittings. Use the tee to split gas lines to push multiple kegs with one CO2 tank.

Read more less

Clean smooth bitterness with a slight floral/fruity aroma. This variety generally has a higher AA content than US Magnum. This is the main high alpha variety grown and used in Germany. Fantastic hop to use for bittering.  Hop Statistics: Alpha Acids: 11.0 – 16.0% Beta Acids: 5.0 – 7.0% Alpha-Beta Ratio: 2.2 – 3.2 Cohumulone: (% of alpha acids): 21 – 29% Total Oils in mls per 100 grams dried: 1.6 – 2.6 Storage(% alpha acids remaining after 6 months storage at 68° F): 80 – 90% Similar Hop Varieties: Taurus, Nugget, Columbus

Read more less

2 L - Weyermann® - An excellent Pilsner grain that has been malted in the traditional Bohemian fashion. Floor Malted Bohemian Pilsner is a slightly under-modified malt, with a complex malt flavor. We definitely recommend adding this into your next Pilsner recipe! Approximately 1.5-2.4° L in color.

Read more less

This is a clover clamp sight gauge with a one inch inside flow for placement inline during transfer of wort from kettle to fermenter. In our own system we will use it to monitor flow and to see how our inline oxygenator is flowing. Silicone Seat seals glass and withstands high temperatures. The maximum pressure is 150 PSI, about 10 bar.

Read more less

450-565 °L - Bairds Malt - Unmalted roasted grain, it is the backbone of a Stout. Also a good grain to make red beers with, use 2-3 oz per 5 gallons for a nice red color.

Read more less

Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg.  Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about  the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure. Gauge reads 0 - 15 psi

Read more less

Clean out those dirty draft beer lines! Beer flavor gets funky when your tap, line and faucet are filled with gunk. We recommned that you ideally clean your lines after every keg. Our kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through the whole system. Faucet gets removed and cleaned with the included faucet wrench and brush. Perfect for cleaning home kegerators as well. A must have for cleaning draft systems because life is too short to drink bad beer.

Read more less