Beer Making
-
Malt Muncher Grain Mill - PPE Base Board
This polypropylene base board comes with pre-drilled hole locations for mounting either the MaltMuncher 2 roller or 3 roller grain mill. Board Dimensions - 17.75" x 13.5" x 3/8" Please note: Does not come with screws (M6 x 1 mm thread, 20 mm long). 2 roller mill requires 2 screws, 3 roller mill requires 4. Kegland Part Number: KL09621
$17.99
-
BrewBuilt® 1.5" Tri-Clamp Blowoff U Barb
The Blowoff U Barb eliminates tubing kinks by extending over the shoulder of a stainless conical fermenter and directing tubing straight downward. This gives you the advantage of a stainless steel blowoff cane, but is much easier to clean and sanitize. The 5/8" OD barb is perfect for forming a tight seal with 1/2" ID silicone tubing. Measures approximately 4" from T.C. to barb. 1.5" T.C. 5/8" OD barb Made from 304 stainless steel
$29.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 3/4 in. BSP
This Duotight to 3/4" female thread fitting can be used to connect beverage or gas line to any fitting with 3/4" MPT. Compatible with EVABarrier 9.5 mm OD Tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL13864
$3.89
-
Replacement Turntable Bearing for Cannular Manual Can Seamer
Please Note: This part is intended to be used with the Manual Cannular Seamer (CAN100) which has been superseded by the Cannular Pro. This item will not work with the Cannular Pro (CAN110). Replacement Turntable Bearing for Cannular Manual can seamer (CAN100).
$7.69
-
Omega Yeast | OYL-004 West Coast Ale I | Beer Yeast | Double Pitch | 225 Billion Cells
Popularly called “Chico”, West Coast Ale I is a reliable, versatile and popular neutral foundation for displays of malts and hops. Often used as a house strain, it is highly attenuative and moderately flocculent. And it ferments crisp and clean with light citrus notes under 66° F (19° C). Also try DIPA (OYL052) to highlight hops more. Attenuation: 73-80% Flocculation: Medium-Low Alcohol Tolerance: 11% ABV Optimum Fermentation Temp: 60-73°F Cell Count: 225 Billion Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
Insulating Jacket for FermZilla 27L Conical or 60L All Rounder
Insulating jacket for the 27L FermZilla Conical or 60L FermZilla All Rounder. This jacket is designed to insulate your FermZilla during the colder months to keep your fermentation at the optimun temperature. It can also be used with a heating wrap to warm up the fermenter if the heat from fermentation isn't enough. Also completely blocks any light/UV to prevent light stuck beer. Kegland Part number: KL11488
$49.99
-
White Labs Ultra Ferm (1 L)
White Labs Ultra-Ferm - WLN4100 - is a liquid amyloglucosidase (highly concentrated) from selected classical strain of Aspergillus niger. Ultra-Ferm can be used to make Brut IPAs. Recommended dosage rate of 2.5 mL / BBL. Applications: 1) To reduce saccharification times. 2) To saccharify unmalted cereal brews. 3) To increase attenuation. Function in Beer Production: Brewers often want to produce light beers or dietetic beers. In these cases the brewer wants a controlled or complete hydrolysis of starch and dextrins to fermentable glucose. Traditional brewing methods permit only 75 to 80% hydrolysis of starch present in the grain raw material. Ultra-Ferm amyloglucosidase permits total hydrolysis of dextrins to fermentable glucose, from all types of starch. In the brewhouse, the recommended application dosage of Ultra-Ferm is 0.8 to 3.2L per ton of starch. It can be added at the beginning of the mash-in. Ultra-Ferm optimal pH is between 3.5 and 5.5. Temperature should note exceed 60°C. Amyloglucosidase activity is completely destroyed when the wort is held at 85°C for 10 minutes. Function in Spirits Production: After starch liquefaction by alpha-amylase, dextrins are hydrolysed in glucose by amyloglucosidase, before alcoholic fermentation. Ethanol production is faster and yield is higher. The recommended saccharification temperature is 60°C. A suitable substrate for saccharification is a liquefied starch with a dextrose equivalent (DE) between 10 and 20. A higher DE than 20 might reduce the saccharification efficiency. The concentration of the substrate will also influence the saccharification efficiency. A concentration of 20-25% is a general practice. ULTRA-FERM dosage, for given reaction time, depends on the amount of glucose requested. It is usually recommended to add 400 ml per ton of starch for a fast hydrolysis. Possible pH range of use is from 3.5 to 5.5 with optimal between 4.0 and 5.3. Optimal temperature is 60°C. Amyloglucosidase activity is completely destroyed when the saccharified liquor is held at 85°C for 10 minutes. As an example: a yield of 94% glucose can be obtained after 40 hours with 36000 AGI per kg dry matter; after 72 hours with 17000 AGI/kg and after 85 hours with 13000 AGI/kg, at pH 4.5 with temperature 60°C.
$59.99
-
Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | 1/4" MPT
Torpedo keg gas in ball lock quick disconnect. 1/4" MPT connection. Made from stainless steel. Please note: this is not a flared disconnect. The connection is 1/4" male pipe thread.
$24.99
-
Torpedo Keg Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | 1/4" MPT
Torpedo keg bev out ball lock quick disconnect. 1/4" MPT connection. Made from stainless steel. Please note: this is not a flared disconnect. The connection is 1/4" male pipe thread.
$24.99
-
The Art of Distilling Whiskey (Owens) - Revised & Updated
The newest edition of The Art of Distilling - Revised & Updated! This book is a backstage pass into the world of small-scale distilling of whiskies, gins, vodkas, brandies, and more. The reader, the ultimate spirits aficionado, will learn how water and grain are transformed into the full range exquisite, timeless liquors. There are few books available that explore the actual craft of distilling in such detail. Most of the other spirits books chronicle the historical side of the distilling world or focus on the flavors of various vintages. Our book will be the consummate insider's guide to distilling techniques. Bill Owens' original photography, the result of two cross-country road trips, offers comprehensive illustration of the microdistilling world.
$28.99
-
Hop Twine for Rhizomes | Bundle of 5 Strings
Hop Twine is a paper twine cut to 20.5 ft. with a tested strength of 100 lbs. Paper based strings are used for hop training and are a popular option for home-growers and commercial growers alike. Made of wound paper, they have a perfectly rough surface for the hop bines to cling to. Best paired with spring eye clips for easy placement as twine is for above ground use only. Sold in bundles of 5 strings.
$14.29
-
Replacement LCD Screen for 35L & 65L BrewZilla
Replacement LCD Screen for 35L & 65L BrewZilla
$32.99
-
KICK Carrageenan T Tablets (For 5 bbl)
KICK Carrageenan™ T is a boil kettle flocculent based on very pure carageenan. KICK is more powerful than generic Irish Moss and correctly sized so that each tablet will treat 5 bbls of wort. The active ingreident, Kappa Carrageenan, is a high molecular weight polysaccharide derived from red seaweed.
$10.49
-
Belgian Candi Sugar (Clear)
Used to make Belgian Trippels. Candi Sugar adds a slight residual sugar, a certain crispness, and a higher alcohol percentage without increasing flavor. Belgian candy sugar.
$7.99
-
Vic Secret | Pellet Hops
Vic Secret is an Australian hop known for its bright tropical character of pineapple, pine, and passionfruit. Similar to Galaxy but with a lighter profile. Highly recommended as a whirlpool or dry hop addition where the tropical notes will really shine. Displays a more earthy character when added late in the boil. Hop Statistics Alpha Acids: 14 – 17% Beta Acids: 5 – 9% Alpha-Beta Ratio: 1.9 - 3.4 Cohumulone: (% of alpha acids): 51 – 57% Total Oils in mls per 100 grams dried: 1.9 – 2.8 Similar Hop Varieties: Galaxy
$3.49
-
Duotight BlowTie | Diaphragm Spunding Valve | 0-40 PSI | 8 mm Duotight
The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). The blow off pressure can be set by either pairing the BlowTie with the Push-In Pressure Gauge (D1160), or by attaching it to an empty keg that has been pressurized to the desired psi. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating Kegland Part number: KL03643
$16.49
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller (WC130), allowing you to adjust the waterflow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07375
$4.99
-
Omega Yeast | OYL-114 Bayern Lager | Beer Yeast | Double Pitch | 225 Billion Cells
Thought to come from Munich’s oldest, traditional and vintage-vibed brewery. The Bayern Lager strain is clean, crisp and ferments well at a wide range. It has good flocculation, and has both low sulfur and low diacetyl production. Attenuation: 72-76% Flocculation: Medium Alcohol Tolerance: 9% ABV Optimum Fermentation Temp: 51-62°F Cell Count: 225 Billion Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
Omega Yeast | OYL-605 Lactobacillus Blend | Lacto Pitch
A Lactobacillus brevis and plantarum blend that is clean and reliable with a wide temperature range. The plantarum, isolated in collaboration with Marz Community Brewing, sours efficiently at lower temperatures. Maximum souring develops typically within 48 hours with no need to hold high temperatures as it is efficient at the lower end of its range. Note also that the blend is extremely hop sensitive, so make sure to add only to unhopped wort. Attenuation: N/A Flocculation: N/A Alcohol Tolerance: N/A Optimum Temp: 68-95°F Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$16.99
-
Fermentis | SafAle™ K-97 German Ale | Dry Beer Yeast
K-97 is ideal for delicate beers like Kolsch, Wits and Session Beers as well as heavily hopped beers Tends to present floral and balanced fruity character depending on fermentation conditions Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world The perfect dry yeast for your German ales or Belgian-style wheat beers. K-97 is selected for its penchant to form a large, firm krausen while fermenting. A great choice for ales that you want to have a low ester character. The lower attenuation of K-97 makes for beers with a nice mouthfeel. Can ferment anywhere between 54-77°F, although the ideal range is between 59-68°F. This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below. Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel. Attenuation: 80-84% Sedimentation Time: Slow Alcohol Tolerance: 9-11% ABV Optimum Fermentation Temp: 64-78°F *See the technical data sheet below for more information on rehydration, usage and storage.
$6.29
-
Sspunding Valve | Adjustable PRV - Non-Scaled (Up to 2BBL)
Introducing Ss Brewtech's new line of adjustable pressure relief valves, commonly referred to as spunding valves. These valves enable Unitank fermenters to both ferment under pressure and condition beer before transferring to a keg. The compact non-scaled version is perfect for a homebrewer that doesn’t mind taking the extra minute or two to dial in their valve's release pressure using the gauge included with their Unitank. The polycarbonate cup is designed to hold sanitizer so that the tank remains 100% sanitary throughout the course of the fermentation process. You can pair the spunding valve with a 1.5" tri-clamp tee (H666) and 90-degree elbow (H667), which enables the unit to be installed on the Unitank’s blow off arm, as shown in the photo. (Scaled version shown in example photo - FE892B) Lastly, a final note on safety, always leave the fixed-pressure PRV included with the Unitank in place, never exceed the maximum rated working pressure of the vessel at any time during operation. All 304 Stainless Construction Only for use with pressure rated Unitanks 1.5" TC interface Removable sanitizer cup Easy disassembly for cleaning Not for use on low pressure vessels (Chronicals, etc.)
$119.95
-
Blichmann Universal CIP Spray Ball Kit
The universal CIP Spray Ball kit can be custom fit into any fermentor, kettle, keg cleaner and more! All that's needed for mounting is a simple 7/8" hole. This spray ball from Blichmann Engineering is designed to work perfectly with the RipTide Brewing Pump and the March 815 series pumps. Features full stainless construction to last a lifetime!
$49.00
-
KOMOS® Stainless Steel Jockey Box (4 Tap) - Rear Entry
KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, to the 50-foot stainless draft coils, these draft boxes are designed to provide years of foam-free dispensing. KOMOS Stainless Steel Jockey Box 100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless steel Shank Plates protects the cooler from being damaged when tightening faucets and shanks Stainless Steel construction on all serving components means this box will last for years Premium Stainless Steel Cooler provides superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 54 Quart Stainless Steel Cooler 4 x 50’ Stainless Steel Coils (5/16” OD) 4 x Stainless Steel Faucet Shanks 4 x Stainless Steel Pass Through Shanks 4 x Stainless Steel Flanges 4 x Stainless Steel Forward Sealing Faucets 4 x Black Tap Handles 4 x Stainless Steel Shank Plates (inner & outer) Jockey Box Specs: 25" L x 18" W x 17.75" H 43.5 lbs
$999.99
-
KegLand MKII Magnetic Drive Pump | 65 Watt | Replacement Stainless Steel Pump Head
Replacement stainless steel pump head for the 65-watt MKII Pump (PMP502). 3/4" BSPT ports. KegLand Part Number: KL03872
$49.49
-
Replacement Right Angle Silicone Elbow Bend for BrewZilla | Gen 3 | Gen 4
This is a replacement silicone elbow bend for 35L or 65L BrewZillas. Compatible with Gen 3 and Gen 4. This part joins the pump to the inlet on the base of the BrewZilla then to the outlet of the pump to the recirculation arm on the side of the BrewZilla. Made from food grade silicone. Temperature resistant to 356°F (180°C). KegLand Part Number: KL06293
$8.79
-
Ss BrewTech | HD Casters | Unitanks, Chronicals, Brites, and Modular Brew Cubes
Designed to make moving unfilled brewing vessels easier. HD casters are designed for use on our fermenters and brite tanks 1BBL and under. Also can be used with our Ss Grain Mill Cart and other modular Brew Cubes. Not for use with our Nano Jacketed Unitanks. Stainless Steel caster frame with brake Designed for harsh brewery wash-down environments Ideal for use with Half BBL and 1BBL vessels 3" wheel diameter 3/8" UNC x 2" Zinc coated stems 250 lb static load rating per caster Includes stainless washer leveling kit The installation guide can be found here. Please note proper installation is required to prevent damaging the casters. *Not intended to be moved when full. *Not For Nano Jacketed Tanks
$79.95
-
KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | Stainless Steel | 13.5 GPM | 65 Watt
Please note: the example images show an AU style 220V plug. This unit comes with a standard US 3-prong 110V plug. Updated images coming soon. A more powerful version of our best-selling MKII pump. This magnetic drive pump has 65 watt power, ideal for large batch homebrewing and micro brewers. The pump head is made from 304 grade stainless steel with 3/4" threaded ports that can easily be converted to tri-clamp. Works like a March or a Chugger but with a sealed case that is more water resistant (not water proof). The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. We recommend adding two 1.5" T.C. x 3/4" Female BSPP adapters to the ports. From there you can use a ForgeFit 1.5" T.C. x Male QD to use quick disconnects with your lines, or convert to your preferred tri-clamp fittings. Specifications: 110V / 60hz Max Head: 15-21 ft. Max Flow: 13.5 Gal/min Max Temp: 248°F (120°C) Rotatable 304 stainless steel pump head 3/4" BSPT fittings Water resistant casing KegLand Part Number: KL05487
$219.99
-
Replacement Glass Lid for 35L BrewZilla
Replacement Glass Lid for 35L BrewZilla. Handles are not included.
$25.49
-
Ss Brewtech Sampling Coil
Ss Brewtech Sampling Coil. Only fits the Ss Brewtech sample valve (H586). Features: All 304 Stainless 10 Turn Proof Coil 5.5 feet of stainless coil allows for sampling under pressure Coil is welded to compression body Compatible with all Ss Brewtech Unitanks Compatible with all Ss Brewtech Pro Unitanks Stainless tubing is 3 mm ID and 4 mm OD
$139.95
-
Blichmann Cooling Coil for 7 gal Fermenator
Use this coil to make a cooling system for your 7 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Short Cooling Coil fits up to 7 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 9.5" tall x 9" diameter
$99.00
-
Replacement Top Cap for Stainless Tower | 1-3 Tap Tower
Replacement Top Cap for 1-3 tap Stainless Tower. Direct replacment for the KOMOS Stainless Draft Tower.
$9.89
-
Lunar Shock Wheat Ale | Blue Moon® Clone | 5 Gallon Beer Recipe Kit | Extract
Smooth and creamy mouthfeel with an outstanding citrus flavor and aroma Includes Mittelfruh hops Estimated ABV: 5.4% Estimated IBUs: 9 Makes 5 gallons of finished beer There's a stunning celestial body on the rise, and it's dead set on blasting your taste buds with an onslaught of refreshing flavor. Drawing inspiration from two prominent wheat ales—Blue Moon and Shock Top—this clone recipe is sure to transport you to a cosmos of crisp citrusy goodness and subtle coriander spice. Always light and refreshing, Lunar Shock aims to orbit your brew schedule year-round. An American take on the Belgian Witbier style. The wheat and oats provide a smooth and creamy mouthfeel, while sweet orange peel and coriander contribute outstanding citrus flavor and aroma. Makes 5 gallons Estimated Original Gravity: 1.052-55 SRM (Color Range): 5 IBUs: 9 Estimated Alcohol Percentage: 5.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
$34.99
-
Black Malt - Viking Malt
488-563 °L - Viking Malt - Strong burnt and smoky flavors. Harsh but less acrid than roasted barley. Used in dark beers like stouts and porters, mainly for its strong coloring ability.
$3.99
-
Golden Ale Malt - Viking Malt
3.9-5.8 °L - Viking Malt - Strong flavor contributes malty, cookie, sweet and nutty notes with great balance of those. Made from 2-row spring barley. Ideal for ales and special lagers.
$3.29
-
Munich Dark Malt - Viking Malt
8.1-9.6 °L - Viking Malt - Aromatic, nutty character. High curing temperature results in clearly reduced enzyme activities compared to Pilsner Malt. Ideal malt for dark lagers, festival beers and bocks for underlining malty flavors and full bodied taste. Malt Specification: Moisture % - max. 5.0 Extract fine % dm - min. 78.0 Color °L - 8.1-9.6 Protein % dm - max. 11.5 Free amino nitrogen mg/l - min. 120 Saccharification - max. 15
$2.89
-
Grainfather GF30 Conical Fermenter | 7 gal.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. The Grainfather GF30 Conical Fermenter has built-in wireless control, so you can control and monitor fermentation from anywhere! The GF30 Conical Fermenter gives brewers more flexibility and freedom during fermentation than ever before! Connect the built-in wireless controller to the internet and the Grainfather App, add fermentation tracking devices and control/monitor fermentation from anywhere! The GF30 Conical Fermenter allows you to dump yeast, take samples and transfer your wort via our innovative, dual function, valve design. Partner it with the Grainfather GC4 Glycol Chiller and get full control over the heating and cooling of your unit. Features: Double Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve. Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature-controlled room. The fermenter acts as an artificial environment that can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter, and never needs cleaning or sanitizing - a true innovation for a fermenter of this scale. Easy Access to the Interior for Hassle-Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimizes the risk of infection. Golden Angle Conical: The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. Dual Valve Tap: Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment-free beer. Easily collect your yeast from below the sediment line with the same unique valve for recultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you. Support: The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical inquiries on brewing or how the Conical Fermenter works, as well as general customer service inquiries. All Grainfather Conical Fermenters come with a 24-month warranty. Includes: Conical Fermenter Fermenter Lid Rubber Bung Bubbler Airlock Cone Plug Cone Plug Seal 5 cm (2") Tri-Clamp Digital Temperature Display Power Adapter and Wall Plug 2 m (6.5 ft) M12 3-Pin Power Cord Dual Valve Tap Wi-Fi Capable Wireless Temperature Controller Specifications: 304 Stainless Steel Body (polished inner and brushed outer) 30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal) 30 W, 12 V heating power 3.8 cm (1.5") ferrule on lid (for pressure transfer attachments) 5 cm (2") ferrule on bottom of cone Dual Valve Tap with 110 mm (4.3") inlet Dimensions of the GF30 Conical Fermenter: Diameter with handles: 360 mm (14.17") Height (without airlock): 910 mm (35.82") Height with bubbler airlock: 1090 mm (42.91")
$694.98
-
Sulfuric Acid - 0.12N - Lamotte Water Test Reagent (7748WT-G)
Replacement Sulfuric Acid - 0.12N (7748WT-G) for the Lamotte Water Test Kit (7189-01).
$11.30
-
Calcium Hardness Indicator Tablets - Lamotte Water Test Reagent (T-5250-H)
Replacement Calcium Hardness Indicator Tablets (T-5250-H) for the Lamotte Water Test Kit (7189-01).
$14.90
-
Ss Brewtech Domed False Bottom
Domed false bottom from Ss Brewtech. Features: Made from 304 stainless steel Domed shape Central suction point Welded handle Silicone gasket Note: These false bottoms are designed for the Ss Brewtech Brew Kettles and will not fit other kettles. They are also not compatible with the Ss Brewtech BME Kettles.
$101.95
-
BrewKeg Pressure Gauge
Connects to the Gas port on the BrewKeg10 lid and reads the pressure inside the BrewKeg10
$71.99
-
Imperial Yeast | A24 Dry Hop Ale | Beer Yeast | Double Pitch | 200 Billion Cells
Dry Hop is a blend of A20 Citrus and A04 Barbarian. When this blend goes to work on your hoppy beer, the hop aroma blows up. The combination of these strains produces amazing aromas of citrus, peach, and apricot that will accentuate your IPA, pale ale, and any other hop-driven beer. This blend contains a strain that tests positive for the STA1 gene via PCR analysis and is therefore considered to be Saccharomyces cerevisiae var. Diastaticus. This yeast strain is not a genetically modified organism (GMO). Attenuation: 73-75% Flocculation: Medium Alcohol Tolerance: 10% ABV Optimum Fermentation Temp: 64-74°F Cell Count: 200 Billion Please Note: For best results we Always recommend ordering an Ice Pack with your liquid yeast. Ice Packs can be found below in the "You might Also Need" section. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$12.99
-
CaraAmber® Malt - Weyermann® Specialty Malts
23 - 31 °L - Weyermann® - CaraAmber® is a drum-roasted caramel malt made from two-row, German barley that can be used to improve flavor stability, fullness and enhance color. Full red color is achieved as well as better mash efficiency when using CaraAmber®, while flavors of toffee, caramel and bread are imparted. Suitable for Bocks, Dunkels, Brown Ales, Red Lagers, and Amber style beers. EBC: 60-80 Lovibond: 23-31 Usage: to 20% Moisture: 3.0-4.5% Total Nitrogen: 10.0-12.0% Extract% (dry basis): 78-81 Soluble Nitrogen Ratio: N/A
$4.29
-
Replacement PRV | Pull Ring Pressure Relief Valve | Red | 35 PSI
Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$7.69
-
Beer Faucet Shank | 5.5" | Welded 1/4" Barb | Includes Plastic Collar
Comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 4 3/8". Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/2" - Shank Length (Without Nut & Nipple) 4-1/8" - Thread Length 5-1/4" - Pass Through Length
$21.99
-
Stainless Hood for Braumeister
Upgrade your Braumeister with this Stainless Steel Hood! Combined with the Insulating Jacket, these pieces will improve the boil of your brau, both getting you to temp faster, and making the boil more vigorous. Compatible with all generations of Braumeister, made before or after 2015.
$159.99
-
Pale Ale Malt - Dingemans Malting
3.5-4.3 ° L - Dingemans Pale Ale - Dingemans Pale Ale malt is fully modified, kilned longer and more intensively. This malt gives your beer a golden color. (3.8°L)
$3.99
-
Superior Pilsen Malt - Great Western Malting
1.6 °L - Great Western Malting - Superior Pilsen - Very pale, well modified, base 2 row malt. Perfect for brewing malty light-colored lagers, ales and beers where a crisp, clean finish is desired. (1.6°L) Produced from selected lots of premium, Canadian-gown Copeland barley Low in protein, and colour High in extract Balanced modification Great for Lagers
$2.89
-
Idaho #7 | Pellet Hops
Idaho #7 hops are known for their piney, tropical, fruity, citrusy, earthy, and floral flavors and aromas. Typically used as an Aroma/Flavor hop with high alpha acid levels and average cohumulone content. Its strong hop character makes it ideal for IPAs, APAs and any other hop forward beer. Suggested as a single hop or for blending as a late addition. The high oil content and soft pelletizing process make this ideal for dry hopping and whirlpool. Hop Statistics: Alpha Acids: 10 – 14.9% Beta Acids: 4.0 – 5.0% Total Oils in mls per 100 grams dried: 1.0 – 1.6 Storage(% alpha acids remaining after 6 months storage at 68° F): 60 - 65% Similar Hop Varieties: Amarillo® hops, Chinook, Columbus
$2.49
You have seen 960 out of 2746 products