Beer Making

This beer filter is designed to be used with the KegLand 1 Micron Filter Cartridge. This filter works best when used as the middle man when transferring icy cold uncarbonated beer between two kegs. All you will need to do is purchase tubing, ball locks to connect to your kegs, and the filter cartrdige to use this system. The included Duotight fittings are compatible with 9.5 mm OD EVABarrier draft tubing. You can connect this tubing to flare style ball lock disconnects using these 9.5 mm Duotight Flare Adapters. Features: Clear high-pressure housing  Purge valve to expel air pockets  1/2" BSP inlet and outlet  Compatible with other 10" filter systems Note: This filter can also be used to filter out yeast in your distillation wash. Removing yeast before you put your wash into your boiler will significantly improve the quality of your final spirit. Many off flavors in distillation can come from boiling yeast cells. When the yeast cells get boiled, they break open releasing many off flavors aromas and fusel oils. KegLand Part Number: KL02042    

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analog gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Compatible With: BlowTie 2 Spunding Valve Duotight In-Line Regulator w/ Gauge Core 360 Mini CO2 Regulator Specifications: Backlight Illumination: Hold yellow button for 3-5 seconds Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Radial O-ring Stem: 7.8mm Bore Please note: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge. For analog pressure gauges that are compatible with liquid, see below: Mini Gauge 0-15psi Mini Gauge 0-30psi Mini Gauge 0-60psi Mini Gauge 0-150psi KegLand Part Number: KL18388

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   This tri-clamp pressure relief valve features a 0-15 psi pressure gauge and adjustable PRV.  1.5 tri-clamp Gauge reads from 0-15 psi Hand adjustable PRV  

Read more less

1.5 °L - BestMalz - German 2-row spring barley malted for lightest color. Great as a base malt in your palest lagers. Has excellent enzyme contribution. Creates a bright and high foaming beer. Use 100% of grist. Malt Specification: Moisture % - max. 5 Extract fine % dm - min. 80.5 Color °L - 1.5  Protein % dm - max. 11.5  

Read more less

Get started with the best package on the market - the Behmor® 2000AB Plus with beans and accessories. The Behmor® 2000AB Plus is an easy to use roaster and our top choice for balancing roast quality with affordability. Based on a rotating drum, similar to commercial roasters, you can roast up to one pound at a time. As a drum style roaster is is much quieter than air based roasters. The smoke suppression technology is also a key feature for indoor use. It comes with preprogrammed roast profiles but you can also use manual mode to control temps and drum speed.  This kit includes a stylish Bodum® 8-cup French Press - a truly gourmet method of brewing specialty coffee. Also included is "Home Coffee Roasting: Romance and Revival" - an excellently written, incredibly informative, and authoritative book written by Kenneth Davids (a big name in the coffee industry). You will be roasting like a pro in no time! You Get What You Pay For: When purchasing a Coffee Starter Kit from us, keep in mind that you purchase more than a book and some equipment. Along with every one of our products we provide a wealth of knowledge and advice. Coffee tasting and roasting notes, product reviews, tutorials, experiment summaries, and phone or email customer support (advice, recommendations, assistance, and the like) are services that we provide at no extra charge. We are serious about quality coffee and products as well as excellent customer service. Your satisfaction is guaranteed. Kit Includes: Behmor® 2000AB Plus Coffee Roaster 8-cup Bodum® Brazil French Press Home Coffe Roasting: Romance and Revival Three pounds of quality green coffee beans! Please note the primary image shows an older model. The 2000AB Plus has a black exterior as shown in the images that follow.  

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle Side handles with silicone coated handles for heat protection Stainless handles with stainless rivets for secure lifting   Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30    

Read more less

Use this adapter to connect your draft cleaning pump directly to a sanke keg coupler. This allows you to back flush cleaning solution through your lines without having to remove the faucet. Simply attach your D-style coupler, open your facuet, and pump solution through. Adapter only. Does not include draft cleaning pump or coupler.

Read more less

The Stainless Bucket Fermentor is the perfect fermentation vessel for 2.5 to 3 gallon batches. The small design enables it to easily fit inside a refrigerated unit.   Also available in 7.5 gallon size for 5 gallon batches.   Features: 304 Stainless Steel Coned Bottom Embossed Level Markings Rotating Racking Arm Includes Ball Valve, Airlock, and Stopper Liquid Crystal Thermometer Dimensions: Height - 14.75" to top of lid (Add 6.25" for airlock and stopper) Width - 14.5" handle to handle Depth - 13.5" including valve

Read more less

This add-on table spacer allows the Cannular Can Seamer to be used with 330ml Can Fresh Cans (CAN133). The Cannular was designed to work with the 500ml cans right out of the box, but for smaller cans the spacer is required to lift the can up a bit higher. NOTE: You will need to make some adjustments to the Cannular before using this table spacer. Please see the video below. Kegland Part number: KL13086  

Read more less

This is a replacement 175°C (347°F) thermal cut out switch for the BrewZilla 220V 35L, 65L & DigiBoil 65L Units.   This thermal cut out switch is mounted directly to the heating element so as soon as the heating element get too hot the bi-metal switch will activate and cut the power to the element. It can also trigger an E3 or E4 error when this happens on the display.

Read more less

This Duotight elbow fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!   Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07030  

Read more less

Laser Cut from 12 guage 304 Stainless Steel and hand finished, this will be the last faucet wrench you ever own. Designed by a draft tech with professional draft techs in mind.   Features: Pin Wrench Screwdriver Regulator Adjuster Nut Wrench Keg Tap Probe Wrench Shank Coupler Nut Wrench Shank Lock Nut Wrench Regulator Wrench  

Read more less

Tropical IPA is a unique Saccharomyces strain formerly classified as a Brettanomyces strain, that produces delicate, tart, tropical mango and pineapple fruit characteristics with a clean finish. Try it at its higher temperatures to bring out the tropical profile. It’s stubbornly non-flocculent, but worth it.   Attenuation: 85+% Flocculation: Low Alcohol Tolerance: 10% ABV Optimum Fermentation Temp: 75-85°F Cell Count: 225 Billion   Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

White Labs Ultra-Ferm - WLN4100 - is a liquid amyloglucosidase from selected classical strain of Aspergillus niger. This single serve unit is perfect for 5 gallon batches. A key ingredient when making Brut IPAs.   Applications: 1) To reduce saccharification times. 2) To saccharify unmalted cereal brews. 3) To increase attenuation.   Optimal temperature is 140°F. Amyloglucosidase activity is completely destroyed when the saccharified liquor is held at 185°F for 10 minutes.   Like White Labs Ultra Firm? Then you will love CellarScience® Brutzyme - Glucoamylase Enzyme!    

Read more less

Replacement silicone gasket for the BrewZilla / DigiBoil ball valve (AG474).

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. An affordable wort chiller made from 50' of 1/2'' Stainless Steel tubing. You can use our CE20 hose thread adaptor to attach to your sink. Uprights are held together by a single hose clamp rather than welding/soldering. Note: The inner bend on the coils  have small indentations that are a natural result of the winding process used during manufacturing. By enlarging the photos you can view.  As a bonus these actually help turbulate the cooling water to eliminate laminar flow. Approx. 12.75" diameter, 12" to the top coil, 23" to the bend to go over the lip of the kettle.

Read more less

Introducing the all new uKeg 128 pressurizable growler from Growler Werks. Made from double-layer, vacuum-insulated stainless steel, this mini keg will keep your beer fresh and cold anywhere. Fitted with a CO2 regulating cap and tap handle. Includes two 16 g CO2 Cartridges, brass handle and integrated pressure gauge. Features: Adjustable CO2 regulator built into lid keeps beer carbonated. Silver dial on top allows you to adjust from 0-15 psi. Built in tap allows you to easily pour beer any time you want and included tap lock prevents the flow of beer when you don't. Mounted sight glass allows you to see how much beer you have left. Durable Double-Wall Vacuum-insulated Stainless Steel keeps beer cold all day! Uses food grade 16 gram CO2 cartridges. 8.5 in. wide x 11.6 in. tall

Read more less

Completely impervious to oxygen and sunlight and made from 304 stainless steel, this growler is one of the best storage options for beer. This growler comes with a double wall vacuum insulation keeping your delicious beer cold for hours. The spring wired lid makes this growler capable of holding up to 30 psi. This is a smokin deal when compared to other double wall growlers.   Dimensions: 4.75 in. Diameter x 12 in. Height; Holds 2L or  67 oz Draft Kit is out now! Kegland Part number: KL04282

Read more less

This magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade food-grade heat-resistant SPS. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. Optional stainless steel pump head upgrades available—standard stainless center inlet head or stainless inline tri-clamp head. Want More! power? Check out this pump's bigger brother, the 60-Watt MKII. Features: 110v/60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min)  1/2" BSP fittings Rotatable pump head Max temperature - 248 F/ 120 C Water resistant (not proof!) casing Kegland Part Number: KL05470

Read more less

The Ss recirculation manifold is a nice gentle way to recirculate your wort. The manifold sits on top of the grain bed and evenly distributes the flow through 24 different holes on top of the manifold. Works great with our recirculation bulkhead fitting (BE386) and 1/2" FPT to 3/8" knurled hose barb (BE387). The manifold will fit in Ss Brewtech 10-30 gal kettles and mash tuns. It's 12.6" in diameter of 304 stainless steel with a 3/8" hose barb inlet.

Read more less

Ferrari Deluxe bench capper with adjustable spring loaded head. Head can be easily moved by pressing the black button on the side and sliding the capping mechanism up or down. Also referred to as Ferrari Delux or Super Agata.

Read more less

Released in 2012, this is one of the brand new hops from Germany that is making craft brewers around the globe take notice.  Mandarina is extremely limited and in high demand for all kind of beer styles. It is being used in IPA, Saisons, you name it.  It is known for having a fruity, citrusy, Mandarin Orange flavor, hence the name. It is a daughter hop of Cascade grown in Germany and is also said to slightly enhance sweetness.   We are thinking IPA but since this hop is so new we would love to see your reviews.  

Read more less

The only Turbo to use when the ambient temperature is above 91° F (33° C). Delivers excellent quality alcohol in hot conditions. Heat Wave is also the only yeast we recommend for `stacking`. Up to a 200 litre volume can be fermented using 8 sachets (providing the start liquid temperature and air temperature are both 68° F). Characteristics: Excellent quality alcohol in hot conditions. Max Sugar Quantity: 13.2 lbs (6 kg) Ideal Water Start Temp: 68° F (20° C) Ferment Temp Range: 68 - 104° F (20 - 40° C) Ideal Ferment Temp: 86° F (30° C) Approx. Ethanol %: 13.0%

Read more less

Triple Distilled Turbo yeast should be used where ultimate alcohol quality is of primary importance. Only use this Turbo Yeast strain where cool air temperature (65° F) can be maintained. This is a revolutionary breakthrough in Turbo Yeast development making it possible to produce "triple distilled" quality alcohol in the home. Characteristics: Ultimate alcohol quality Max Sugar Quantity: 15.4 lbs (7 kg) Ideal Water Start Temp: 86° F (30° C) Ferment Temp Range: 64 - 75° F (18 - 24° C) Ideal Ferment Temp: 68° F (20° C) Approx. Ethanol %: 15.0%

Read more less