Beer Making
-
Cannular Replacement Operation Switch | Momentary Switch | Cannular Pro Semi-Auto
Replacement Operation Switch (Momentary Switch) for Cannular can seamer. This switch is only compatible with the Cannular Pro Semi-Auto unit. NOTE: the switch might be yellow or blue. You can tell the Operation Switch from the Power Switch by testing the button. The Operation Switch can be depressed/pushed in while the Power Switch will only click when pressed. KegLand Part Number: KL16445
$6.59
-
Temp Twister Lid for Bucket Buddy Fermenters | 65L
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 65L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28110
$43.99
-
Temp Twister Lid for Bucket Buddy Fermenters | 35L
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 35L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28103
$38.49
-
CMBecker Shank Tailpiece | 10mm (3/8") Barb | Beer Nut Included
The CMBecker International Inline Flow Control 10mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/8". It is slightly smaller than 1/2", but it will fit a 1/2" ID Hose if properly clamped. Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 10mm which is between 1/2" and 3/8". When using with 3/8" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) When using with 1/2" it will be loose, but we have used it with syphon hose and thicker high heat (EJ beverage or silicone) hose. Just make sure you clamp it properly to get a good seal. This will not work with a standard shank, it works with CMBecker shanks
$5.49
-
CMBecker Shank Tailpiece | 7mm (1/4") Barb | Beer Nut Included
The CMBecker Inline Flow Control 7mm Barb is necessary for those looking to use tubing that has an inner diameter of 5/16 or 3/8" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 7mm which is slightly wider than 1/4" at 0.27" This will not work with a standard shank, it works with CMBecker shanks.
$5.49
-
CMBecker Shank Tailpiece | 4mm (5/16") Barb | Beer Nut Included
The CMBecker Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 4mm. When using with 3/16" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) Just make sure you clamp it properly to get a good seal This will not work with a standard shank, it works with CMBecker shanks. These seal at two places and do not have a flat end (see photo)
$5.49
-
KegLand Ball Lock Quick Disconnect (QD) | Replacement Seal
Replacement seal for barbed or flareed stainless ball lock quick disconnects from KegLand. Compatible with KEG732, KEG734, KEG745, & KEG746.
$1.09
-
Vista Hop Rhizome
Rhizomes are now in stock and orders are being fulfilled. If you haven't ordered your rhizomes yet, this is your last chance till next season! 9.1-11.3% AA. Grows well in all climates. Ripe honeydew, papaya and tropical melange, white peach and fleshy pear. Vista hops are the most recent release from the USDA public breeding program. The public hop breeding program is unique in that it exists to broadly benefit the entire hop and brewing industries, whereas private programs look more at explicit private financial gain. The USDA public breeding program bred the genetic hop base on which American craft beer was built: Cascade, Centennial, Cluster. And continues to innovate to adapt towards new DDH hazy, juicy IPA brewer and consumer preferences with releases like Cashmere, Triumph, and now Vista. Rhizomes should be planted immediately for best results. If your area is still experiencing frost then you can plant them in a planter indoors until it is safe to transplant outside. The first years crop will generally be smaller than subsequent years. Since these are live plants, we cannot guarantee they will grow, so we recommend buying two of each type to help ensure their success. Shipping Restrictions: Due to agricultural restrictions, we can only ship rhizomes to addresses that are in the United States, excepting Hawaii, Oregon, Washington, and the counties of Bonner and Kootenai in Idaho. Unfortunately, we cannot ship these to international locations including APO/FPO addresses.
$6.99
-
Replacement Actuator Pin for KegLand Core 360 Mini CO2 Regulator
Replacement Actuator Pin / Thumb Screw Assembly for KegLand Core 360 Mini CO2 Regulator. KegLand Part Number: KL20039
$10.99
-
Replacement FFL Outlet for KegLand Core 360 Mini CO2 Regulator
Replacement FFL Outlet for KegLand Core 360 Mini CO2 Regulator KegLand Part Number: KL22828
$5.49
-
Replacement Seal Kit for KegLand Core 360 Mini CO2 Regulator
Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barb MFL outlet o-rings and a thumb screw o-ring. For instructions on replacing the seals and/or general maintenance please refer to the product manual below. KegLand Part Number: KL12584
$7.69
-
Solenoid Valve | Duotight Compatible | 12V | 0-115 psi | 6.35 mm
This super handy Solenoid Valve is compatible with 1/4" or 6.35 mm OD PE Water Line or EVABarrier tubing. This size tubing is often used on water filtering systems or reverse osmosis systems, and can be used with an Inline Regulator to drop your mains water pressure if needed. Unlike some other solenoid valves this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low-pressure gasses. Suitable for pressures up to 115 psi (8 bar) so it will handle water pressure with no problem at all. Made from high-quality metal and POM engineering plastics so it is durable and suitable for contact with a wide range of chemicals and beverages. Specs: Inlet/Outlet: 6.35 mm (1/4") Pressure Rating: 0-115 psi (0-8 Bar) Mode: Normally Closed (NC) Solenoid Coil Voltage: 12V Solenoid Coil Amp Draw: 1.1A KegLand Part Number: KL09478
$10.99
-
KOMOS® Double-Wide Drip Tray - 29.5 in. Countertop (Stainless)
This extra-long drip tray is well-suited for the KOMOS Double-Wide kegerator and home bar countertops. Made from stainless steel with a removable grill. Good for up to 8 horizontally mounted draft faucets. Features: Removable grill Made from stainless steel 29.5" L x 6.7" W x 0.9" D
$109.99
-
Asco Root™ – Root Growth Enhancer for Hop Rhizomes
Asco Root™ is a granular slow release extract of cold water seaweed (Ascophyllum nodosum). It greatly helps to aid in root growth and set, stress tolerance, and overall plant health while providing a strong potassium source. It has shown exceptional yield increases in field trials, and provides a great head start to help first year rhizome planting. You will receive a bag to cover the volume need of 5 rhizomes, and it should be planted in the hole with your rhizomes when planting.
$19.99
-
KOMOS® Draft Line Kit
The KOMOS draft line kit includes lengths of EVABarrier draft tubing, the same tubing used in all KOMOS kegerators. Each kit includes beer line and gas line, and Duotight tee fittings to split your gas line (excluding single tap kit). See below for recommended Duotight fittings. EVABarrier tubing is a high-quality double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! The outer barrier gives the tubing a nice stiffness that makes it extremely kink resistant and perfect for use with push-in fittings. The inner wall is an excellent gas barrier, keeping oxygen out and CO2 in. The internal surface of the tubing is extremely smooth, making it difficult for bacteria and microbes to cling to. Kits Include: Beverage line Measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line Measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap kit includes uncut rolls of bev & gas line We recommend cutting bev lines to 5.5-6.5 ft. lengths Gas lines can be cut to whatever length best suits your needs Duotight tee fittings to split gas line (for 2-Tap and higher)
$10.99
-
Replacement Internal Seal for Stainless Steel Ball Lock Caps - 5 Pack
Replacement internal seal for Stainless Carbonation and Line Cleaning Ball Lock Quick Disconnects. Only the stainless steel ball lock caps require these seals (KG50 & KG502). They are not needed for the Red & Yellow plastic versions. Comes in pack of 5. KegLand Part Number: KL21272
$2.19
-
Brass Hex Nut for Draft Shanks
Replacement brass hex nut for standard beer shanks. KegLand Part Number: KL06286
$4.39
-
NukaTap® Stainless Steel Beer Faucet | Matte Black Finish | Punisher Edition | Forward Sealing
The NukaTap Punisher Edition beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The Nuka Tap is compatible with all Intertap spout accessories. NOTE: The Punisher Edition faucet features a matte black body with stainless spout. Other models are pictured as example photos. For the all black NukaTap faucet, see the Stealth Bomber Edition. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish / brushed stainless spout NSF approved Kegland Part Number: KL26482 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Punisher Edition faucets for professional settings.
$40.49
-
MB® 7 bbl Brewing System Control Panel | Mash Rake Control | 7" Touch Screen | Individual Element Control | Stainless Steel Enclosure | UL Listed | Made in the USA
Pairs perfectly with the MB 7 bbl Complete Electric Brewhouse. The 7" touch screen allows you to control and monitor your brew day with ease. Featuring individual element control, remote web access, and auto start function that can be fully programmed to start by time and day. This unit has an additional input for controlling a mash rake. For more information regarding setup, click here. Individual element control Easy expansion/growth to VFDs for the pumps Remote and local web access for managing from phone/tablet/desk 7" touch screen Supplied with three temperature probes and cable Total Amperage Draw: 250 amps at 3ph 208V Made for MB by Electric Brewing Systems UL listed 30" x 30" x 12" This product is supported by Electric Brewing Systems. For instruction manuals and troubleshooting, click here. Power requirements listed represent actual amperage draw. Please consult a licensed electrician to determine what amperage breaker is required based on your local codes. Please Note: This item requires a professional electrician for installation. It will also require punching for your conduit runs.
$9,599.99
-
BrewBuilt® Brewing Kettle Screen
Filter hops, grains, coffee grounds, and other kettle additions Screen sits tight to the edges with the included BrewBuilt silicone screen gasket All stainless welded components with handle for easy install and removal The BrewBuilt Kettle Screen fits perfectly in the BrewBuilt Brewing Kettle and can be used to filter hop additions, convert the kettle into a mash tun, or for making large batches of cold brew coffee. The welded stainless steel flat bar feet sit on the bottom of your kettle and positions the screen approximately 3/8" above the kettle's bottom port. The silicone gasket creates a tight seal around the kettle wall to retain solids above the screen when transferring liquid out of the kettle.
$149.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 3/4 in. BSP
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
$3.29
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. BSP
This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14441
$3.29
-
KOMOS® | Stainless Splicer | 1/4" Barb x 5/16" Barb
Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 5/16" or 3/8" ID tubing. The barbs are slightly undersized at 6 mm (0.24") and 8 mm (0.31"). Made from 304 stainless steel.
$4.39
-
KOMOS® | Stainless Joiner | 1/4 in. Barb x 1/4 in. Barb
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/16" to 1/4" ID tubing. The barbs are slightly undersized at 6 mm (0.24"). Made from 304 stainless steel.
$4.39
-
Replacement PRV Spring for WilliamsWarn BrewBottler
Replacement PRV Spring for WilliamsWarn BrewBottler.
$2.19
-
Replacement Filling Head Compression Spring for WilliamsWarn BrewBottler
Replacement Filling Head Compression Spring for WilliamsWarn BrewBottler.
$6.59
-
Replacement Filling Head Body for WilliamsWarn BrewBottler
Replacement Filling Head Body for the WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.
$21.99
-
Chrome Plated Plastic Decal Holder - 73 mm
Jazz up your kegerator, home bar or commercial beverage dispensary with these stylish decal holders. Clamps directly on to the beer shank coupling nut so you don't have to remove the faucet to put on the decal holder or to swap out the decal itself. Made from chrome plated plastic with a soft padding to protect your draft components from scratches. Easily attach or remove the decal holder with a philips head screw dirver. This unit will fit a 73 mm (2.8") diameter decal, sticker or label. Also avaialbe in 82 mm (3.2") diameter. KegLand Part Number: KL00871
$7.69
-
Chrome Plated Plastic Decal Holder - 82 mm
Jazz up your kegerator, home bar or commercial beverage dispensary with these stylish decal holders. Clamps directly on to the beer shank coupling nut so you don't have to remove the faucet to put on the decal holder or to swap out the decal itself. Made from chrome plated plastic with a soft padding to protect your draft components from scratches. Easily attach or remove the decal holder with a philips head screw dirver. This unit will fit an 82 mm (3.2") diameter decal, sticker or label. Also avaialbe in 73 mm (2.8") diameter. KegLand Part Number: KL0088
$7.69
-
Replacement PET Tank for 60L All Rounder FermZilla
Replacement PET Tank for 60L All Rounder FermZilla. Normal wear and tear may lead to stress marks or other potential points of failure when the tank is used under pressure. We recommend visually inspecting the unit for signs of wear every 6-12 months, and conducting a hydro test every 2 years. The hydro test process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank. KegLand Part Number: KL15226 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
$98.99
-
KOMOS® Stainless Steel Sanke Keg Beer Tap - S-Style Keg Coupler (With PRV)
KOMOS stainless S-Style beer tap for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. The coupler comes without fittings so it can be adapted however the user sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port. Nuts and tailpieces for standard draft line and Duotight fittings for use with EVABarrier can be found below. The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a lower or higher pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.
$44.99
-
KOMOS® | Vinyl Tailpiece Gaskets | 10-Pack
These 5/8" Vinyl gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler. Comes in a convenient zip lock bag.
$6.59
-
KOMOS® | Silicone Tailpiece Gaskets | 10-Pack
These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler. Comes in a convenient zip lock bag.
$6.59
-
KOMOS® | Corny Keg O-Ring Kit
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects. Comes in a convenient zip lock bag.
$4.49
-
The Hops List - 2nd Edition
Introducing the Second Edition of world’s most comprehensive beer hop dictionary. The Hops List – The perfect tool for passionate brewers and craft beer drinkers. Discover new hop flavors and aromas from around the world. The Hops List is the largest collection of hops information ever compiled. With it you’ll have access to variety descriptions, analytical data, tasting notes, substitutes, style suggestions and lots more on a staggering 339 unique varieties. Inside you’ll also discover insights from brewmasters who have worked at some of the world’s most prestigious breweries like Dogfish Head, Founders Brewing Co. and Brooklyn Brewery among many others. Inside they reveal some of their favorite hop varieties as well as tips on how to use them best. The Hops List is a fantastic resource for professional brewers, amateur brewers and craft beer drinkers who are looking for an exhaustive resource on just about every beer hop on the planet. Features: 339 Hop Varietals Tasting notes, origins, acid and oil data, and more Tips from professional brewers
$29.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Female Bulkhead
This Monotight bulkhead works similarly to a pass through shank. Install wherever it may be needed and pass EVABarrier from one side to the other. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21029
$3.29
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Elbow
This Monotight elbow fitting will help routing gas or liquid lines in your kegerator or water filter setup. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14052 Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.79
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Tee
This Monotight tee piece is perfect for splitting water or gas lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.99
-
RAPT Fermentation Chamber | Wine Rack
Turn your RAPT Chamber into a highly specialized wine cellar. These shelves are suited to fit wine bottles and the larger champagne bottles. KegLand Part Number: KL25577
$21.99
-
RAPT Fermentation Chamber | Replacement Foot
Replacement adjustable foot for the RAPT Fermentation Chamber. Single foot, not a set of 4. KegLand Part Number: KL26789
$2.79
-
RAPT Fermentation Chamber | Replacement Blank Insert
This plastic insert is located in the top panel of the RAPT fermentation chamber. These can be removed or replaced to route gas line from a mounted Duotight regulator. KegLand Part Number: KL26444
$2.19
-
RAPT Fermentation Chamber | Replacement PCO1881 Insert
Replacement PCO1881 Insert for the RAPT Fermentation Chamber. The RAPT chamber can fit up to 4 inserts. KegLand Part Number: KL26437
$3.29
-
RAPT Fermentation Chamber | Replacement Top Lid Cover
Replacement Top Lid Cover for RAPT Fermentation Chamber. KegLand Part Number: KL26420
$54.99
-
RAPT Fermentation Chamber | Replacement Water Drip Tray
This water drip tray is a replacement part if you have damaged your drip tray or you simply want a new one. Makes for easy cleanup of any spills or condensation formed during the operation of your RAPT Fermentation Chamber KegLand Part Number: KL26284
$27.49
-
RAPT Fermentation Chamber | Base Tray Cover
Replacement Base Tray Cover for RAPT Fermentation Chamber. KegLand Part Number: KL26277
$10.99
-
RAPT Fermentation Chamber | Polycarbonate Heat Resistant Shelf Tray
Heat resistant shelves for your brand new RAPT Fermentation Chamber. Can be used for trays of mushrooms or seed sewing with added grow lights. It can also be used as a humidity tray if you require a humid environment for your project. 60 mm (2.3") deep. KegLand Part Number: KL25553
$43.99
-
RAPT Fermentation Chamber | Replacement Main Circuit Board
Replacement Main Circuit Board for RAPT Fermentation Chamber KegLand Part Number: KL17084
$27.49
-
RAPT Fermentation Chamber | Replacement Heavy Duty Wire Shelf
Replacement Heavy Duty Wire Shelf for the RAPT Fermentation Chamber. Weight Rating: 132 lbs (60 kg) Dimensions: 17.7" W x 16.1" D x 1.1" H (450mm x 410mm x 30mm) KegLand Part Number: KL15844
$21.99
You have seen 1968 out of 2756 products