Beer Making

This Duotight reducer fitting can be attached to the Intertap Short Shank with 1/4" Duotight compatible barb (D1242). Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Also attaches to the Plastic Ball Lock Cap, allowing the cap to be used with 8 mm OD EVABarrier. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07481

Read more less

Mix up the mash with this 26" stainless steel mash paddle. Made from heavy duty stainless steel, this paddle is perfect for stirring with little resistance thanks to the slotted design. Overall length of 26 inches; the paddle itself is 4.7" long and 3.1" wide. BPA free.

Read more less

Distilled hop oil is an amazing new product we are making available to homebrewers.  Distilled hop oil varies from other oils in that it is produced from fresh hops, as opposed to dried and processed pellets.  Distilled hop oil delivers the same wet hop character that was previously only possible to acquire with the use of freshly harvested hops.  The oil is extremely shelf stable, so you can now brew a consistant fresh hop IPA all year long. Extremely volatile, this oil should only be used for aromatic applications; typically applied at bottling/kegging.   Distilled hop oil is very potent; add to taste. We recommend using roughly 0.5-1 ml per 5 gallon batch, if replacing 50-100% of a dry hop, added directly to the beer prior to bottling or during kegging. Be careful to not push off the volatile aromatic compounds (disturb the beer as little as possible and reduce oxygen exposure). Most staff members here found that 1ml per 5 gallons was "too hoppy" when replacing 100% of the dry hop.  Hop heads (myself included), found that the 1 ml per 5 gallon dosage gave a pungent, fresh, pleasurable and unique hop experience.  Tasting these oils is as close to being in Yakima for hop harvest as possible! 

Read more less

This molded rubber beer line gasket is used anywhere you use a tail piece and nut. Often used on beer taps and/or shanks. 

Read more less

Columbus, or CTZ (Columbus, Tomahawk, and Zeus), is a high alpha varietal with a neutral bitterness and intense aroma. A true dual-purpose hop that works very well for bittering, but shines just as easily as a late addition. CTZ hops have an earthy, spicy character that is great for bittering. But when used as an aroma addition, you'll find more floral and citrus notes come out that can be very pungent. Columbus is a perfect choice for IPAs, Pales, Imperial Ales, Hazys, Stouts, and Lagers. Hop Statistics: Alpha Acids: 14.0 – 16.0% Beta Acids: 4.0 – 5.5% Alpha-Beta Ratio: 2.55 – 4 Cohumulone: (% of alpha acids): 30 – 35% Total Oils in mls per 100 grams dried: 1.5 – 2.0 Similar Hop Varieties: Chinook, Nugget, Millennium

Read more less

The Kettle Tube allows you to better filter trub and whole hops from your wort while transferring from your kettle to your fermenter. It is a rugged tube of stainless steel screen 12" in length, 1" in diameter, with a 1/2" MPT fitting at one end, and is our replacement for the discontinued Bazooka Screen. This fitting is intended for use with kettles that have 1/2" FPT threads on the inside of the kettle, or it can be used on the back of any of our line of Weldless Ball Valves. Excellent for straining out leaf hops in the boil kettle (Pellet hops can clog the screen). We also have several customers who use this as a screen in their Cooler Mash Tun! Kegland Part Number: KL03766

Read more less

Designed to be used with the KegLand Beer Filtering System. 10" filter cartridge PE reinforced plastic shell for added protection Washable (recommended wash with Sodium Percarbonate) 1 micron  

Read more less

Suitable for both hops and steeping grains. We highly recommend using a steeping bag for hops to keep vegetal matter contained in the boil kettle and out of your fermenter. If you use a counterflow chiller or plate chiller for cooling, filtering hops is even more important as these devices can clog if too much hop matter passes through them. The hop sock does not have a drawstring. You will want to tie the end in a knot to keep it closed. Dimensions: 150 mm wide (5.9") 800 mm long (31.4") KegLand Part Number: KL01281  

Read more less

This top value fermenter is made from 304 grade stainless steel and has an integrated (concealed) 36-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The base inside this unit is a dome so it's really easy to clean while the rotating rack arm enables you to drain out every last drop. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans. Specifications: Capacity: 35L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 36 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. Testing has shown that the Bucket Buddy can heat to 104°F in a room temperature ambient environment without insulation. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL20695  

Read more less

The Oxygen Flow Regulator from Blichmann Engineering™ helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort.  Vital to yeast health and the final flavor profile of your beer.  Knowing the FLOW is important - other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely.  Gone are the days of spray and pray!  

Read more less

Anvil Brewing Equipment high capacity digital grain scale handles up to 65lb with 0.02lb accuracy! The huge 12.5” X 11.75” stainless steel weighing surface is big enough to support about any size bucket or container. The remote scale allows easy reading and can be mounted in any convenient location. Selectable lb and kg units. Includes batteries and remote power supply.

Read more less

Torpedo keg gas in ball lock quick disconnect. Barbed and stainless steel.

Read more less

3/4 inch mpt and 3/4 inch barb. Made from 304 stainless. Will work on Ss Brewing technologies line of Chronical Fermenters, as well as with many 20x20 cm Plate & Frame Filters.

Read more less

Stainless steel mash paddle with 60 inch long stainless steel handle.  These paddles are built to last a life time, and are great for doughing-in to deeper mash tuns with ease! Perfect nano-brewery mash paddle. 

Read more less

Our Vodka Distillery Yeast is a high yield Vodka Strain with extraordinarily low metabolite production; ideal for use with sugar, grain or potato feedstock in Vodka or other white spirit production. Provides complete nutrition for easy fermentation of low-nutrition ashes together with myloglucosidase enzyme or dextrins conversion. Sufficient for 6.6 gallon fermentation. Statistics: Ideal Water Start Temp: 86° F Ferment Temp Range: 63 - 73° F (17 - 23° C)

Read more less

Replacement lid stopper for the Brew Bucket and Brewmaster Bucket. The stopper is made out of food-grade silicone and is designed to fit a 17 mm hole.

Read more less

5.1-7 °L - Weyermann® - To increase body, aroma, malty sweetness and a slight biscuit flavor. A great reason to do mini-mashing or all grain brewing. This malt contains about half the enzyme potential of 2-row malt, which is enough to self convert in a mash. It can be steeped in an extract brew to achieve some of the flavor contribution, but will not add any sugars in a steep. This is a must malt if you looking to construct a true European-style lager.  

Read more less

Taprite's D-Style beer tap for commercial sanke kegs. Fits most kegs produced in the USA.  Made in America by Taprite. This model comes with a pressure relief valve.

Read more less

Test the pH of your beer or wine with confidence using our colorpHast pH strips. These strips are high-quality and are made not to run, so you are assured of an accurate reading each time. Come in packs of 100 strips.

Read more less

Get your grain bed evenly mixed and break up dough balls in seconds! Using a handheld electric drill, this heavy-duty stirrer makes mashing in a breeze Made from all stainless steel with a 1/4" hex head to securely attach to your drill This stainless mixer attaches to an electric drill for easy and thorough mixing of your mash. To get the best mash efficiency it is important to break up dough balls (clumps of grain) and ensure that the grain bed is not compacted.  Allowing maximum recirculation through your grain bed will always yield higher extraction / efficiency rates of your brew. Are far as mixing grain goes, this stirrer is much more efficient and less time consuming than a mash paddle or large spoon. Simply attach to your portable electric drill and secure the 1/4" hex head tightly. Overall length is 23.5" with a mixer diameter of 2.75". Highly recommended for all sizes of BrewZillas. KegLand Part Number: KL32247  

Read more less

The newest wing capper on the market is the Kelly, made by the Ferrari Group in Italy.  We love this capper because it is easy to use, has a smooth capping action, a magnet in the capping head to hold crown caps, and solid metal jaws to firmly grasp the bottle. Sized for standard 26 mm crown caps.

Read more less

This famous yeast strain from Weihenstephan in Germany is used world-wide within the brewing industry. SafLager W-34/70 allows to brew beers with a good balance of floral and fruity aromas and gives clean flavors and high drinkable beers.   Like Fermentis Saflager W-34/70 Bohemian Lage Yeast? Then you will love CellarScience® GERMAN Dry Lager Yeast!

Read more less

Finally there is dry lager yeast we can recommend. This bottom fermenting yeast is widely used by Western European commercial breweries. This yeast develops the best of its flavors when fermented at low temperatures (48F-59F) yet it can still lager characteristics at higher temperatures. We recommend that you keep it between 48F-59F to produce the best beer possible. This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below. Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.   Like Fermentis Saflager S-23 Lager Yeast? Then you will love CellarScience® BERLIN Dry Lager Yeast!

Read more less

3.5 L  - Briess Malting - Use as a rich malty base malt. Fully modified, high extract, low protein. Not just a darker Base Malt. A unique malting recipe results in the development of its unique flavor. Sufficient enzyme level supports the inclusion of even the most demanding specialty malts without extending the brewing cycle. Impacts foam color.      If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - Pale Ale GR901 Great Western Malting - American Pale GR305 Canada Malting - Superior Pale Ale GR670 Thomas Fawcett Malting - Spring Pale Ale GR362 Dingemans Malting - Pale Ale GR330 Admiral Maltings - Maiden Voyage Pale GR700 Admiral Maltings - Gallagher's Best Pale GR701  

Read more less