Beer Making

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass. Comes in a convenient zip lock bag.

Read more less

Stainless steel 1/4 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1106 or KEG1107). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.

Read more less

Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.

Read more less

1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form a seal. See below for EPDM, Silicone, and Vinyl options. Female Beer Thread (5/8" BSP) 5/8" top port opening Comes in a convenient zip lock bag.

Read more less

Replace a missing or damaged gas-in check valve on your Sanke Coupler. This one way gas bladder prevents beer from back-flowing up your gas line and into your regulator where it could cause damage. Comes in a convenient zip lock bag.

Read more less

This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect. Comes in a convenient zip lock bag.

Read more less

Stainless D-Style beer tap for commercial sanke kegs. This premium model features both a stainless inner probe and a stainless steel body. Note some couplers listed as stainless steel only have the stainless probe while the body is chrome plated brass.  Fits most kegs produced in the USA. This model comes with a pressure relief valve.  

Read more less

Replacement Turntable Bearing for Cannular Pro Semi Auto can seamer (CAN110). KegLand Part Number: KL28486

Read more less

Food grade CO2 cartridges provide the purest and most healthy experience in all carbonated beverage applications. It is widely known that not all CO2 cartridges are created equal and that as beverage enthusiasts we should never charge our pressurized growlers with cartridges meant for industrial or sporting activities. Non food safe labeled cartridges can contain unhealthy byproducts or contaminates that may alter both the quality of your beverage experience and its safety. Using food grade CO2 cartridges made from only the purest naturally derived CO2 gas can guarantee the safest and most authentic experience. At over 99.9% pure, Craft Master CO2 cartridges are the healthiest choice for the freshest tasting beer and beverages. Sold in Color Box of 10  and compatible with our 8 gram CO2 cartridge holder. Additional information Weight: 12 oz Dimensions: 2.75 × 1.5 × 13 in Size: 8 gram – non-threaded    

Read more less

Designed for use with the PCO38 Tapping Head. With female PCO1881 threads, it can also be used with the FermZilla Collection Container or Hop Bong Sight Glasses. NOTE: This is the cap only. It does not include a PRV. See below for the PRV that best suits your needs. Warning: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves!   KegLand Part Number: KL20176

Read more less

Duotight 6.35 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10. KegLand Part Number: KL21937

Read more less

Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.

Read more less

This top value fermenter is made from 304 grade stainless steel and has an integrated (concealed) 60-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The base inside this unit is a dome so it's really easy to clean while the rotating rack arm enables you to drain out every last drop. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans. Specifications: 110V / 60W power Capacity: 65L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 60 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. The 65L Bucket Buddy is appropriate for warm fermentations such as kveik. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL23061  

Read more less

The WilliamsWarn ball lock QD with CombiBarb connection allows you to connect draft lines using either standard hose & clamp or Duotight & EVABarrier tubing. The CombiBarb will accept 8 mm Duotight fittings for use with 8 mm OD EVABarrier, but also works perfectly well with 1/4" or 5/16" ID tubing.   

Read more less

Grow your own 2-row malting barley next to your hops for a great aesthetic look, or learn to malt barley at home and grow all of your own beer ingredients right in your back yard! The Small seed pack provides enough seed to grow over 50 square feet of barley. The Large seed pack has enough for over 250 square feet.    

Read more less

3-way stainless steel tee with 5/16" barbed ends. Use the tee to split gas lines to push multiple kegs with one CO2 tank. KegLand Part Number: KL04442  

Read more less

This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 8 mm OD tubing (D1717 / D1718). With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL21036  

Read more less

Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/8" to 1/2" ID tubing. The barbs are slightly oversized at 13 mm (0.51"). Made from 304 stainless steel.

Read more less

Replacement O-ring for RipTide™ brewing pump  

Read more less

This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.  

Read more less

This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.  

Read more less

1.7 L - Rahr Malting Co- A base malt to set your compass by! Rahr North Star Pils™ is crafted to meet the requirements of brewers looking for a domestic pilsner malt with low color and low modification. It is malted to a target of 38-40° Kolbach to facilitate smooth lautering with any mash regimen. North Star Pils™ brings overtones of honey and sweet bread with supporting flavor and aroma notes of hay and nutty character. Suitable for any beer style, but particularly craft brewed versions of classic lager styles. How is this different from Rahr Premium Pils? Compared to Rahr Premium Pilsner, North Star Pils™ is a bit lower in both color and modification; in terms of sensory, North Star Pils™ has more “sweet” attributes vs. the more grainy & cracker attributes found in Rahr Premium Pils. Malt Specification: Color °L - 1.7 - 1.9 Moisture % - max. 4.5 Extract fine % dm - min. 79.0 Protein % dm - max. 12 Usage Rate - 100% Diastic Power - 120-160°L   If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - Pilsner GR900 Briess Malting - Pilsen GR311 Canada Malting - Superior Pilsen GR671 Great Western Malting - Superior Pils GR309 Weyermann® Specialty Malts - German Pilsner GR310 Weyermann® Specialty Malts - Bohemian Pilsner GR347 Dingemans Malting - Belgian Pilsner GR340 BestMalz - Pilsen GR414 Admiral Maltings - Admiral Pils GR710    

Read more less

KOMOS stainless steel draft tower with matte black finish. Includes EVABarrier draft line, and Duotight push-to-connect fittings. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. These are the same tower kits inlcuded with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower with matte black finish Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)   Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.  

Read more less

Due to high demand, the single tap is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early December.   KOMOS stainless steel draft tower with EVABarrier draft line, and Duotight push-to-connect fittings. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. These are the same tower kits inlcuded with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)   Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.  

Read more less