Beer Making

The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters. Please note the kegerator does not come with a plug for the tower holes. The Olympus is intended to be paired with standard 3" diameter draft towers or the KOMOS Quad Tap Tower kits. Feature Summary: Easy to use digital temperature controller Commercial grade compressor uses R290 refrigerant Tower cooling fan Beautiful stainless steel countertop style surface All stainless steel interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside ETL Certified CO2 Regulator, tower, draft lines not included Specifications: 90.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 78" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 20 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5 15.5 Gal. Half Barrel Keg (Full Size Keg) - 5   Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters. Please note the kegerator does not come with a plug for the tower hole. The Olympus is intended to be paired with a standard 3" diameter draft tower or one of the KOMOS Quad Tap Tower kits. Feature Summary: Easy to use digital temperature controller Commercial grade compressor uses R290 refrigerant Tower cooling fan Beautiful stainless steel countertop style surface All stainless steel interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside ETL Certified CO2 Regulator, tower, draft lines not included Specifications: 58.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 46.5" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 12 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 12 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 3   Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

Replacement neoprene jacket for the X3 Uni Conical fermenter. Not compatible with X2 or X1 Uni Conicals.

Read more less

Due to high demand, the 25 and 38 gallon are currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The X3 Jacketed Conical and IceMaster Max 4 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 4 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling With room to connect up to 4 conicals, this package is perfect for brewers planning to expand their fermentation capacity over time Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 4? This powerful glycol chiller has more than enough cooling capacity for your chosen X3 Conical with room to add an additional three fermenters down the road. X3 Jacketed Uni Conical & IceMaster Max 4 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 4 makes for the perfect tag team partner, providing all the cooling capacity you'll need for up to four fermenters. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

This is the go-to strain for New England-style IPAs. It produces a medium ester profile similar to WLP008 East Coast Ale Yeast. It leaves some residual sweetness, helping accentuate both malt and hop flavors and aromas, while retaining a velvety mouthfeel. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 75-82% Flocculation: Low to Medium Alcohol Tolerance: 5-10% ABV Optimum Fermentation Temp: 64-72°F Cell Count: 150 Billion

Read more less

Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen. Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience. Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity. Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule. The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. This kit includes the 4" T.C. Pressure Lid to fit the tri-clamp ferule on Kegmenter Fermentation Kegs. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel. Due to the large 4" tri-clamp diameter, it is difficult to get higher pressures without leaking. Therefore we suggest using this up to 21 psi. The included Yellow PRV for the Pressure Lid is rated to 17 psi. The 3 Pieces of the Hop Bong Pressure Pack: Pressure Kit ​The Pressure Kit includes two Ball Lock Caps for Gas & Liquid. The Liquid cap can be paired with the optional Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the Kegmenter. Tri-Clamp Pressure Lid Replacing the standard lid with the Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil. Hop Bong  Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: Kegmenter 4" T.C. Pressure Lid 2" Hop Bong 2" Butterfly Valve Red PRV & PCO1881 Cap Combo Yellow PRV Yellow Ball Lock Cap (2) Red Ball Lock Caps (3) 2" Tri-Clamps (3) 2" Silicone T.C. Gaskets Optional Accessories: Floating Dip Tube (FE115A) Filter Attachment (KEG657) Available Kegmenters: 7.6 Gallon (FE582) 13.2 Gallon (FE584) 15.3 Gallon (FE581) 1 bbl (FE585) KegLand Part Number: KB23665 Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

Due to high demand, the 7, 14, 25, and 38 gallon are currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is so compact that it only takes up about 12" of extra space next to your conical. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

Make that Dank IPA LOUD with a hit of cannabis terpene extracts Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain The Chronic - Replicates the terpene profile found in Blackberry Kush cannabis Blackberry and Afghani Kush come together to provide bursting Berry and Dank aromas Feeling Good! Terpenes function as mood enhancers; this Blackberry Kush will have you feeling Relaxed and Peaceful 420 Friendly - Contains no THC and no CBD. Legal worldwide Blackberry Kush Cannabis nostalgia harmonizes with all the glory of hops in gassy Blackberry Kush. Dark berries combine with notes of spice and earth to create an exquisitely dank detour on the ultimate flavor reunion tour. BrewGas Series A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere. True-to-Type Botanically Derived Cannabis Profiles Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family. Dosage Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: Scalable TTB Aproved Legal Worldwide No THC / No CBD Water Soluble Powered by Terpenes Repeatable Recommended storage: 40-90°F. Do not freeze. Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.

Read more less

Make that Dank IPA LOUD with a hit of cannabis terpene extracts Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain The Chronic - Replicates the terpene profile found in Pineapple Express cannabis  Hawaiian and Trainwreck come together to provide bursting Dank, Tropical and Earthy aromas Feeling Good! Terpenes function as mood enhancers; this Pineapple Express will have you feeling Energized and Peaceful 420 Friendly - Contains no THC and no CBD. Legal worldwide Pineapple Express Pineapple Express is the tropical stop on the Cannabis and Hops World Tour. Dank pineapple notes blend with gas for a lush flavor that’s the perfect combo of pine and citrus with hints of light spice and earth. BrewGas Series A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere. True-to-Type Botanically Derived Cannabis Profiles Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family. Dosage Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: Scalable TTB Aproved Legal Worldwide No THC / No CBD Water Soluble Powered by Terpenes Repeatable Recommended storage: 40-90°F. Do not freeze. Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.

Read more less

Make that Dank IPA LOUD with a hit of cannabis terpene extracts Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain The Chronic - Replicates the terpene profile found in King Louie XIII cannabis  OG Kush and LA Confidential come together to provide bursting Citrus, Dank and Woody aromas Feeling Good! Terpenes function as mood enhancers; this King Louie XIII will have you feeling Relaxed and Peaceful 420 Friendly - Contains no THC and no CBD. Legal worldwide King Louie XIII As the gassiest, skunkiest performance of the canna-hops tour, the BrewGas headliner is none other than King Louie XIII It’s overwhelmingly dank with citric woody top notes and a blast of earthy base. When it reigns, we pour. BrewGas Series A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere. True-to-Type Botanically Derived Cannabis Profiles Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family. Dosage Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: Scalable TTB Aproved Legal Worldwide No THC / No CBD Water Soluble Powered by Terpenes Repeatable Recommended storage: 40-90°F. Do not freeze. Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.

Read more less

Adapter for custom filtration setup. Use with our 30mm filters, filter holder and custom gasket.

Read more less

TC34mm to 19mm (0.75") hose barb. Fits Brewtools 16x25mm silicone tube perfectly (BT1032A).

Read more less

Replacement flow control shuttles for the Gen 2 NukaTap Flow Control faucet. These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. These pieces are backwards compatible with the Gen 1 NukaTap Flow Control model, replacing part numbers 11 and 12 in the diagram image above. KegLand Part Number: KL17817

Read more less

The NukaTap Flow Control beer faucet features a forward sealing design with the added benefit of having a lever to adjust beverage flow. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. The Flow Control model is perfect for users that often switch between beer styles with different carbonation levels, or want to conveniently switch from pouring pints to filling growlers without having to make adjustments to the regulator pressure settings. Generation 2 The NukaTap Flow Control G2 uses a completely new flow control mechanism with better sealing properties against the shank as well as improved flow control. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NukaTap is compatible with all Intertap accessories, except for the self-closing spring. The NukaTap FC uses a specially designed self-closing spring. Made from stainless steel Shuttle made from TPV O-rings made from EPDM Kegland Part Number: KL15523  

Read more less

This is a replacement heat proof graduation sticker for BrewZillas with the PPSU Sight Glass installed. Choose your size of BrewZilla above for the appropriate graduation sticker.

Read more less

Four pack of O-rings for the BrewZilla Sight Glass stainless steel ball valve and elbow. The PPSU Sight Glass uses radial sealing in order to not leak, even under pressure from a 25W pump. This is a very similar design to the Duotight fittings that also use two O-rings. Incase one breaks, or leaks, there is another to save the day. KegLand Part Number: KL33824

Read more less

This BrewZilla PPSU sight glass stainless steel ball valve and elbow use radial seal O-rings to form a strong, leak-free connection. Two in the ball valve and two in the bottom elbow. When assembling the sight glass to upgrade your existing Gen 3 or Gen 4 BrewZilla, you will reuse the female camlock x female 1/2" fitting that comes on the recirculation arm, or you need to purchase a separate fitting for the end of your custom build. You will also need plumbers tape or food grade Loctite to assemble the ball valve with the camlock fitting. Rather than purchasing the parts separately, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. KegLand Part Number: KL33817

Read more less

This is a replacement BrewZilla PPSU Sight Glass tube. This is a one size fits all sight glass for multiple models and sizes. You will need to cut down the 39" PPSU tube to fit your specific model of BrewZilla depending on the length of the recirculation arm. We recommend purchasing the Pipe Cutter to cut the tube cleanly. If your unit did not already include the sight glass, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. See the video below showing you how to measure and install this on a BrewZilla. Specifications: 39.3" (100cm) Long 0.51" ID x 0.59" OD (13mm ID x 15mm OD) Temperature Rating: 356°F (180°C) KegLand Part Number: KL33800

Read more less

EVA-tube is perfect for glycol and other uses where the tube can't bend too much to prevent flow This insulated model is perfect for reducing condensation The tube fits 3/8" (10 mm) hose barb fittings For more information on building a cooling system for your Brewtools fermenter, click here.

Read more less

EVA+PE-tube is perfect for glycol and other uses where a strong tube is needed Commonly used as main tubes for glycol where you use multiple tanks on the same line The tube fits 1/2" (12 mm) barbs Food safe up to 140°F (60°C) For more information on building a cooling system for your Brewtools fermenter, click here.

Read more less

Thermowell for temperature sensors. 160mm length recommended for F100, F150, and F300 fermenters. 1.5" T.C. Inside diameter: 7mm Length: 160mm

Read more less