Beer Making

This handy part is what you need to connect one side into a standard 9.5 mm Duotight fitting and secure the other side with 1/4" ID tubing using a hose clamp over the tube. We have wide range of stainless stepless hose clamps that you can purchase here. The barb is slightly oversized at 7 mm (0.27") which should provide a tight seal with 1/4" tubing. KegLand Part Number: KL25911

Read more less

This handy part is what you need to connect one side into a standard 6.35 mm Duotight fitting and secure the other side with 3/16" ID tubing using a hose clamp over the tube. We have wide range of stainless stepless hose clamps that you can purchase here. KegLand Part Number: KL25928

Read more less

The pressurizable Flex Chamber Collection Jar can be used for removing trub, harvesting yeast, and many other tasks Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones Works perfectly as a sight glass for monitoring fermentation activity Comes standard with all BrewBuilt X3 Uni Conicals With multiple Flex Chambers on hand, you can use one for harvesting/storing yeast and another for dry hopping The pressurizable Flex Chamber Collection Jar attaches directly to the 3" butterfly dump valve on the X3 Uni Conical and can be used for removing trub, harvesting yeast, and many other tasks. Designed for the BrewBuilt X3, but compatible with any 3" T.C. dump valve. Since the chamber is made from clear Tritan, it works perfectly as a sight glass for monitoring fermentation activity. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. The Flex Chamber is also fully compatible with the Gen 3.2 FermZilla Tri-Conical fermenters. 3" T.C. connection 3" tri-clamp, gasket and end cap included 28 mm PCO 1881 threaded side ports 20 fl oz volume Chamber made from Tritan Please note: Never remove the Flex Chamber while your conical is under pressure. Always release pressure before removing the Flex Chamber.

Read more less

Replacement gasket for Duotight 1/2 in. BSP fittings. Compatible With: DUO122 - 9.5 mm (3/8 in.) x 1/2 in. BSP DUO169 - 8 mm (5/16 in.) x 1/2 in. BSP DUO162 - 6.35 mm (1/4 in.) x 1/2 in. BSP KegLand Part Number: KL88830

Read more less

Replacement door seal for the KOMOS Standard and Deluxe model kegerators. (KG401 / KG490)

Read more less

Replacement tri-clamp lid gasket for the BrewBuilt X3 Uni Conical. Compatible with all sizes of X3 via 8" tri-clamp connection. Not compatible with X2 or X1 Uni Conicals.

Read more less

Replacement tri-clamp lid for the BrewBuilt X3 Uni Conical. Features a 4" T.C. ferrule, (2) 2" T.C. ferrules, and a built-in pull-ring PRV. Compatible with all sizes of X3 via 8" tri-clamp connection. Not compatible with X2 or X1 Uni Conicals. Lid only. The replacement lid comes with the PRV but does not include tri-clamps, gaskets, or other parts & accessories pictured in the example photo.

Read more less

Replacement clamp for the BrewBuilt X3 Uni Conical 8" tri-clamp lid. This 3-piece stainless steel tri-clamp features two hinges which makes the clamp easier to work with on larger fitting sizes.  

Read more less

The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3/8" NPT threaded ports and two 1.5" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included Cooling jacket with 3/8" NPT ports Two 1.5" T.C. ports If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.7" (d) x 42.9" (h) Net weight: 45.6 lbs Gross weight: 48.9 lbs Tank diameter (inside): Ø11" Max volume: 13.2 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 1.5" tri-clamp (2) 2" T.C. blind cap 1.5" T.C. blind cap (2) T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.  

Read more less

The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3/8" NPT threaded ports and two 1.5" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included Cooling jacket with 3/8" NPT ports Two 1.5" T.C. ports If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.7" (d) x 36.6" (h)   Net weight: 37.9 lbs Gross weight: 41.8 lbs Tank diameter (inside): Ø11" Max volume: 10.5 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 1.5" tri-clamp (2) 2" T.C. blind cap 1.5" T.C. blind cap (2) T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.  

Read more less

The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3/8" NPT threaded ports and two 1.5" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included Cooling jacket with 3/8" NPT ports Two 1.5" T.C. ports If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.7" (d) x 30.3" (h)   Net weight: 31.3 lbs Gross weight: 34.8 lbs Tank diameter (inside): Ø11" Max volume: 7.9 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 1.5" tri-clamp (2) 2" T.C. blind cap 1.5" T.C. blind cap (2) T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.  

Read more less

Replacement screen membrane for the Gen 4 BrewZilla RAPT controller. KegLand Part Number: KL32025

Read more less

Bolt kit for connecting Troll Brew Table System modules together. M8 Bolt Kit 85mm, Hex 5, 4 pcs.

Read more less

Low frame with wheels and flat top plate for Brewtools Troll Brew Table System. Used for placing equipment like glycol chillers or handling malt when using the crane. Remember M8 bolt kit for connecting to other modules. Troll Frame With Plate only. Does not include Troll Table pictured in example photo. Specifications: Size: 28.75" x 28.75" x 5.9" (assembled) Weight assembled: 37.5 lbs Material: AISI 304 In the box: 1 pcs table frame, 28.75" x 28.75" 1 pcs flat top plate with hole 2 pcs wheels with brakes 2 pcs wheels without brakes 4 pcs 20-pack silicone plugs for holes Tools and bolts for assembly

Read more less

Bracket for installing Brewtools counterflow cooler under the Troll Brew Table. Tools and bolts included.

Read more less

Low frame with wheels for installing Brewtools Unitanks in the Troll Brew Table System. Fits all Brewtools Unitanks up to and including the F300 Unitank. Includes bolts and nylon spacers for Unitank installation. Remember M8 bolt kit for connecting to other modules. Specifications: Size: 28.75" x 28.75" x 5.9" (assembled) Weight assembled: 22 lbs Material: AISI 304 In the box: 1 pcs unitank frame, 28.75" x 28.75" 2 pcs wheels with brakes 2 pcs wheels without brakes 4 pcs nylon spacers and M10 bolts for Unitank 4 pcs 20-pack silicone plugs for holes Tools and bolts for assembly

Read more less

The perfect match for the Brewtools Troll Brew Table 220 lb lifting capacity Height adjustable (6 levels) Flexible lifting bracket Flexible pulley placement on boom PureBlast™ surface The Brew Crane allows you to easily lift and swing the malt pipe of the Brewtools Brewing System. The Troll Table comes ready for the crane to be installed. The crane can lift 220 lbs. A universal lifting bracket is included. It is possible to use the crane without the Troll Brew Tables at your own risk. The hole needed for the bushings is 64mm. Specifications: Ceiling height requirement: 72.6" to 92.3" Height requirement is based on model of brewing system you have For more detailed specs, please follow this link to Brewtools Docs Lifting height above table top: 39.75" to 59.5" Weight assembled: 29 lbs Material: AISI 304 In the box: Crane, 3parts Lifting bracket Bottom support Winch bracket Winch Support leg with adjustable foot (2) S-hooks Nylon pulleys and bushings Tools and bolts for assembly Brewtools Troll Table sold separately Note: The maximum weight must never been exceeded. Crane must only be used with support legs or a low frame bolted to the side you lift towards. For User Manuals and support, please follow this link to Brewtools Docs.

Read more less

Modular design with the possibility to bolt several frames together Strong 1.5" x 1.5" square frame construction PureBlast™ surface Ready for Troll Brew Crane High quality wheels, 2 of which have brakes  The Brewtools Troll Brew Table System is a result of years of development. Brewtools worked hard to keep this simple, modular and flexible, and futureproof for accessories and add-ons. The optional Troll Brew Crane will give you the possibility to handle malt pipes with ease. Specifications: Size: 28.75" x 28.75" x 23.25" (assembled) Weight assembled: 59.5 lbs Material: AISI 304  In the box: (2) table frames, 28.75" x 28.75" (4) legs (15.75") (1) top plate with folded edges (5) silicone strip to raise top plate above corner bolts (2) wheels with brakes (2) wheels without brakes (4) 20-pack silicone plugs for holes Tools and bolts for assembly

Read more less

Modular design with the possibility to bolt several frames together Strong 1.5" x 1.5" square frame construction PureBlast™ surface Ready for Troll Brew Crane High quality wheels, 2 of which have brakes  The Brewtools Troll Brew Table System is a result of years of development. Brewtools worked hard to keep this simple, modular and flexible, and futureproof for accessories and add-ons. The optional Troll Brew Crane will give you the possibility to handle malt pipes with ease. Specifications: Size: 28.75" x 28.75" x 35" (assembled) Weight assembled: 63.9 lbs Material: AISI 304  In the box: (2) table frames, 28.75" x 28.75" (4) legs (27.5") (1) top plate with folded edges (5) silicone strip to raise top plate above corner bolts (2) wheels with brakes (2) wheels without brakes (4) 20-pack silicone plugs for holes Tools and bolts for assembly

Read more less

SafAle™ F-2 is specifically selected for secondary fermentation in bottle and in cask. This yeast assimilates very little maltotriose but assimilates basic sugars (glucose, fructose, saccharose, maltose) and is characterized by a neutral aroma profile respecting the base beer character. Its neutral aroma profile, high alcohol resistance and stickiness characteristics make it a perfect match for consistent re-fermentation in bottle and cask. SafAle™ F-2 resists to high alcohol levels (>10% v/v) and allows brewers to obtain all the properties of refermentation such as: Beer preservation thanks to oxygen trapping Contribution in roundness and maturation aromas Carbonation Sticks well at the bottom of the bottles/casks and forms a nice haze when it is resuspended Usage: Add 19 to 38 grams of sugar per gallon of beer (5 to 10 grams of sugar per liter) to obtain a saturation of 2.5 to 5.0 g/l of CO2 Pitch the sweetened beer, that should be at fermentation temperature (68-77°F / 20-25°C) with the rehydrated yeast. Carbonation will be achieved in 1 to 2 weeks at 68-77°F. Carbonation at 59°F can take over 2 weeks At the end of refermentation, the beer can be cooled down and will gain in roundness after 2 to 3 weeks Please note: Example image shows a 20g sachet. The correct size is 25g. Updated image coming soon.

Read more less

Replacement malt pipe handle for the 65L BrewZilla. 3/8" thick. KegLand Part Number: KL29513

Read more less

Replacement probe for the RAPT Bluetooth Thermometer (MT409). The cord is 39" long with a 7.8" long probe probe with sharp tip. Please remove the black plastic tip before use. That is for storage to avoid punctures / injury. KegLand Part Number: KL29445  

Read more less

This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out. KegLand Part Number: KL35958

Read more less

You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a stainless steel shank with chrome plated brass hex nuts. Dimensions: 4" - Shank Length 4" - Thread Length 2-3/4" - Pass Through Length Max length with hex nuts at either end Does not account for nuts/nipples you may install Male Beer Thread (5/8" BSP)  

Read more less