Beer Making

Replacement Malt Pipe Bottom Screen for 65L BrewZilla.

Read more less

Replacement Top Screen for 65L BrewZilla.

Read more less

Replacement Malt Pipe for 65L BrewZilla (Gen 3).

Read more less

Replacement Wire Malt Pipe Support for 65L BrewZilla. Made from 304 stainless steel. KegLand Part Number: KL09553

Read more less

Due to high demand, the 55 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. 12-16 °L - Viking Malt - Malty, nutty and clean long-lasting flavor together with unique amylase activities for this color level. This is a real single variety malt for any reddish brew. Use as 100% base malt or specialty malt to add color.

Read more less

Perfect for powering 230V / 30 amp electric elements, power controllers and brewing systems away from your main wall socket. Comes with male and female L6-30 sockets on either end. 10 feet long.

Read more less

The BrewBuilt™ HLT Controller allows you to control a 208-240V heating element up to 30 amps based on temperature. Perfect for keeping your sparge and mash water up to temp. This controller works by turning the burner power on and off at 100% power until it reaches the temperature setpoint. Features industrial-style power switches, and a 1/6 DIN Controller mounted on a splash resistant stainless steel enclosure. Pre-cut mounting holes allow you to hang the controller on your brew stand or on the wall at eye-level. L6-30 connections with 4 ft. cords on either end. Uses a 9' stainless braided PT-100 temperature sensor. Compatible with all 208-240V elements, 30 amps and lower, with L6-30 connections. The HLT Controller includes a contactor to fully shut off both legs when you throw the power switch, making the free end of the cord safer when the element is not plugged in. If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.   **Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**  

Read more less

Coriander is the seed of the herb cilantro. In sharp contrast to the leaf of the latter, coriander seed lends a warm and slightly citrus-like flavor to foods. Use powdered coriander seed in curries, chili, puddings and custards, sauces and baked goods. 

Read more less

Replacement Pull Ring Assembly for BrewZilla False Bottom - 35L & 65L (Gen 3). KegLand Part Number: KL13642

Read more less

Callista was developed by the Hop Research Center in Hüll, Germany. Its low alpha acid content and strong aromatics make it an ideal choice for late kettle additions and dry hopping. Callista's aroma and flavor profile is characterized as citrus, stone fruit, passion fruit, red berries, and gooseberry. Hop Statistics Alpha Acids: 2.0 – 5.0% Beta Acids: 5.0 – 10.0% Alpha-Beta Ratio: 0.2 - 1.0 Cohumulone: (% of alpha acids): 15 – 22% Total Oils in mls per 100 grams dried: 1.4 – 1.75

Read more less

This is a new, exciting hop bred and released by the Hop Products Australia program of the Barth-Haas Group. It is a cross between Tettnanger and an unnamed North American variety, but displays in a wholly unique manner. It is juicy with red fruits like raspberries and red currants, but what sets it apart from other varieties are the white wine notes (similar to Nelson Sauvin), that is most often described as crisp and refreshing "Pinot Gris". Enigma™ has a high alpha acid content (17.0%) paired with an oil content bursting at 2.2 mL/100g. Hop Statistics Alpha Acids: 14.5 – 18.5% Beta Acids: 4.5 – 6.0% Alpha-Beta Ratio: 2.4 - 4.1 Cohumulone: (% of alpha acids): 37 – 43% Total Oils in mls per 100 grams dried: 1.8 – 3.0       Enigma™ is a  trademark owned by  Hop Products Australia      

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   Looking for a premium kegerator to install under the counter of your home bar or outdoor kitche? The KOMOS Outdoor Kegerator offers the best value in the USA for an all stainless steel outdoor rated kegerator. With an all stainless interior and exterior, this unit is built to operate at a level other kegerators simply can't reach. Heavy duty casters come standard for maximum mobility, and front facing ventilation makes it ideal for using as a built in kegerator in an outdoor kitchen. Features include tower cooling fan, wide-range digital controller, stainless door and exterior, stainless floor and interior, heavy-duty casters as standard, and a list of options. Please note the kegerator does not come with a plug for the tower hole. The KOMOS Outdoor Kegerator is intended to be installed under counter tops or paired with a standard 3" diameter draft tower. If you plan to install the kegerator under a countertop, the top cover will need to be removed and you will need to install the Build-In Door Hinge, as the top door hinge is removed with the cover. For homebrewers looking for a fermentation chamber, we recommend the KOMOS residential model. Feature Summary: Digital Thermostat with wide 28 - 76° F temp range. CO2 Tank strap mounts above a triangular stage inside the kegerator Tower cooling fan Efficient and powerful compressor uses R600 refrigerant Beautiful stainless interior and exterior Stainless Steel Countertop Style Drip Tray Stainless Steel Floor for additional keg support Heavy duty rolling casters come standard Front-facing ventilation allows it to be built-in to a cabinet, kitchen, or outdoor counter  Lock & key to keep your precious beverages protected UL & CSA Certified Detailed instructions on assembly and use Specifications: 24" Wide 25" Deep 35" Tall (fridge only) 39.25" Tall with Caster Wheels 115V - 60 hz 1.6 Amp draw Works well in ambient temperatures up to 100°F Internal Dimensions: 21" Wide 18.25" Max Depth 28.5" Tall 27" clearance under controller What Fits: 2.6 Gal. BrewKeg - 2 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 2 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 2 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual.

Read more less

Replacement drain plug assembly for the BrewBuilt IceMaster 100 and Max glycol chillers.

Read more less

This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve (FE960), allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.   Kegland Part number: KL07696

Read more less

Our connection kits include everything you need to hook up your KOMOS Jockey Box and begin pouring perfect pints! This kit comes with all the necessary parts to connect four Ball Lock kegs to your KOMOS Jockey Box except for a CO2 tank and regulator.   KOMOS 4 Tap Ball Lock Connection Kit includes: 5 x 5 ft. lengths of 5/16" CO2 Tubing 4 x Ball Lock Gas In Disconnects 4 x Ball Lock Bev Out Disconnects 4 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces Four-Way Aluminum Air Manifold Hose Clamps and Rubber Washers This Kit Does Not Include a CO2 Tank or Regulator.

Read more less

Our connection kits include everything you need to hook up your KOMOS Jockey Box and begin pouring perfect pints! This kit comes with all the necessary parts to connect four American Sanke kegs to your KOMOS Jockey Box except for a CO2 tank and regulator.   KOMOS 4 Tap Sanke Keg Connection Kit includes: 5 x 5 ft. lengths of 5/16" CO2 Tubing 4 x American Sankey "D" Couplers 4 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces Four-Way Aluminum Air Manifold Hose Clamps and Rubber Washers This Kit Does Not Include a CO2 Tank or Regulator.

Read more less

Our connection kits include everything you need to hook up your KOMOS Jockey Box and begin pouring perfect pints! This kit comes with all the necessary parts to connect two Ball Lock kegs to your KOMOS Jockey Box except for a CO2 tank and regulator.   KOMOS Dual Tap Ball Lock Keg Connection Kit includes: 3 x 5 ft. lengths of 5/16" CO2 Tubing 2 x Ball Lock Gas In Disconnects 2 x Ball Lock Bev Out Disconnects 2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces Two-Way Aluminum Air Manifold Hose Clamps and Rubber Washers This Kit Does Not Include a CO2 Tank or Regulator.

Read more less

Our connection kits include everything you need to hook up your KOMOS Jockey Box and begin pouring perfect pints! This kit comes with all the necessary parts to connect two American Sanke kegs to your KOMOS Jockey Box except for a CO2 tank and regulator.   KOMOS Dual Tap Sanke Keg Connection Kit includes: 3 x 5 ft. lengths of 5/16" CO2 Tubing 2 x American Sankey "D" Couplers 2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces Two-Way Aluminum Air Manifold Hose Clamps and Rubber Washers This Kit Does Not Include a CO2 Tank or Regulator.

Read more less

This beverage line jumper connects to the bev output on a ball lock homebrew keg and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1761 & D1763). Specifications: 5 ft of 5/16" ID Beverage Tubing 5/16" Tailpiece Elbow Flared Ball Lock Bev Out

Read more less

This beverage line jumper connects to the bev output on a standard U.S. D-style sanke keg coupler and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1760 & D1762). Specifications: 5 ft of 3/8" ID beverage tubing 3/8" Tailpiece and Tailpiece Elbow

Read more less

3/8" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 5/16" OD - 3/8"  

Read more less

5/16" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 1/4" OD - 5/16"  

Read more less

Eliminate oxidation in your bottling process with the XF260HP volume-based filling system Made specifically for high proof spirits—featuring components with better resistance to high concentrations of ethanol Liquid is pulled from your barrel or storage tank by the built-in self-priming pump Filling volume is programmed and stops automatically Optional gas flush system Made to order in the United States Eliminate oxidation in your bottling process by using the XpressFill volume-based filling system! The XF260HP two bottle filler is now available specifically for High Proof Spirits. Susceptible components have been replaced with material more resistant to higher concentrations of ethanol.  The XF260HP can easily accommodate very small to very large bottles with its adjustable shelf, allowing great flexibility.  Easy to use, compact in design, precise volume filling, high quality components, hand-crafted in the USA. Gravity-based systems usually involve spirits being transferred to a holding tank, and unless your bottles and holding tank are pre-flushed with inert gas, some degree of oxidation is inevitable. Xpress Fill bottling systems have a closed pathway with a self-priming pump. They also have as an optional built-in sparging (pre-flushing) system that uses Nitrogen or Argon to pre-flush your bottles. To use, place two bottles under the filling spouts, push the gas button (optional at additional cost) to flush the bottles with inert gas. Then hit the Fill button which pulls the spirit from your barrel or stainless storage tank, distributes 750ml of spirit to each bottle, and shuts off automatically when done. It is truly that simple. Each fill cycle lasts 20 seconds. When using 750ml bottles you can expect to fill about 250 bottles per hour. There is also a manual mode allowing you to top up bottles or fill odd size bottles. The two spout filler features a 3/8" inlet. Features: Made to order in the USA 2 Spout fills approximately 250 bottles per hour Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling Weight: 23 lbs Dimensions: 11.25" W x 17" H x 15.5" D Warning: XpressFill bottle fillers are NOT certified as explosion proof, should be used in a well-ventilated area, and not for use with solvents. It should be noted that 70% alcohol is 140 proof and has a flash point of 70°F, making the product volatile, as well as flammable

Read more less