Cornelius Kegs & Parts

Includes two gaskets for the dip tubes, two for the body connects and one for the lid o-ring. Any keg that has been used for soda in the past should have its gaskets replaced because the soda flavor can never be removed from the rubber. These kits work for Ball lock and most Pin lock kegs.

Read more less

White, gas in quick disconnect with barb for gas line. Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn". Kegland Part Number: KL02943

Read more less

Black, beverage out quick disconnect with barb for beverage line. Barb is 1/4". 3/16" beverage tubing is recommended. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn". Kegland Part Number: KL02950

Read more less

Includes ball lock gas-in quick disconnect (barb), 5 ft of 5/16" ID tubing, and two hose clamps.

Read more less

Includes ball lock beverage-out quick disconnect (barb), 5 ft of 3/16" tubing, hand held faucet, and two hose clamps.  

Read more less

You will need this washer anytime you connect flare fittings, except when connecting to our quick disconnects which include a built in washer.

Read more less

This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached. Stainless Steel barb with a chrome plated Brass nut.

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your gas line. Flare is 1/4" Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your beverage line. Flare is 1/4" Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

We love these keg lids as either a replacement or an upgrade to the stock lid featured on many homebrew kegs. Most homebrew kegs feature a straight, parallel bale that sits extemely close to the lid when in the closed position. So close that it can be hard to get a finger or two under the bale to open it. The arms on this lid bend outward creating a nice, easy-to-grip handle to open and close the bale. For use with Torpedo, Cornelius, and Firestone kegs. Comes with a pull-ring pressure relief valve and o-ring. PRV rated to 85 psi.

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your gas line. Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

Slide gasket onto dip tube and then place dip tube back in keg. 5/16" ID with a 7/64" cross section. Made of FDA BUNA N

Read more less

Due to high demand, the 6 gal is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in late October. The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg. The brand new patented design, D794,899, of the Torpedo Keg gives you a high quality keg with features that a dedicated home brewer will appreciate. The machine welds on the Torpedo Keg exceed our standards for quality. There are no nooks and crannies for contaminant to get lodged in. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. These kegs can be stacked on top of each other with the Ball Lock quick disconnects still attached. They feature rolled stainless steel handles that are comfortable to grab. "In" and "Out" are etched near the keg posts for a quick and mistake-free set up when you are connecting lines in a refrigerator or kegerator. Considering the price and quality, the Torpedo Keg is an amazing value! Mouth opening is 5.8" L x 4.8" W. Dimensions:   Height (in.) Diameter (in.) 3 Gal 13.4 11.4 5 Gal 17.9 11.4 6 Gal 20.5 11.4 10 Gal 30.3 11.4  

Read more less

This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. This product is for the Black Beverage Out connection on the right, for the White Gas In connection, see our KEG734. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL03018

Read more less

The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi Kegland Part Number: KL03070

Read more less

White, gas in quick disconnect with male flare fitting made for Cornelius type kegs. 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available. Kegland Part Number: KL02967

Read more less

Black, beverage out quick disconnect with male flare fitting made for Cornelius type kegs. 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available. Kegland Part Number: KL02974

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your beverage line. Barb is 1/4". 3/16" beverage tubing is recommended. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

Keep your kegs insulated with the new CoolBrew Keg Coolers. Specifically built for Cornelius kegs, these jackets will preserve your precious brew for longer when you take a keg out to share with friends. They come a little oversized to give you extra room for ice or ice packs. This one is perfectly sized for 5 gallon Cornelius kegs. Features: Made from durable polyester Comes with a shoulder strap for easy transport Insulation can keep kegs cold for hours Zipper on top provides easy access to tap and QDs 100% waterproof 26.5 in. Tall x 12 in. Diameter

Read more less

For Cornelius style ball lock kegs with curved dip tube. Stainless Steel.

Read more less

Neoprene keg sleeves for standard Torpedo Kegs. For the Slimline series sleeves, see KEG651. 6mm thick. The 5-gallon sleeve is also compatible with 1/6 bbl or sixtel commercial sanke kegs.

Read more less

Neoprene keg sleeves for Slimline Torpedo Kegs. For the standard size Torpedo keg sleeves, see KEG650. Also compatible with standard cornelius kegs. 6mm thick.

Read more less

The gaskets on the body connects that the ball or pin lock fittings slide over. 7/16" ID with a 3/32" cross section. Made of FDA BUNA-N rubber. We also use this as a replacement for the smaller compression ring in our 1/2" Compression fittings so that you can create a snug fit in a Sanke keg conversion kit without permanently compressing a ring on the pick up tube.

Read more less

For the gas in side. Stainless steel construction, approximately 1.5" in length.

Read more less