Up to 35% Off · Ends June 30
Everything On Sale
744 products marked down through the end of June. Shop by brand below or scroll the full lineup.
-
Horizontal Float Switch - 1.5 in. T.C.
Used on a commercial brewing system to shut off electricty or gas before the kettle runs dry. This horizontal float switch conveniently fits into a 1.5" tri-clamp port. It is designed to control the run-dry circuit in an electric brewing system. The contacts are intended to control a relay, contactor, or SSR and should not be used to interrupt full power to an electric element/burner. 50W. The unit is not fit to use on a circuit load, but suitable for signal output.
$131.99 $98.99
-
CellarScience® NECTAR Dry Yeast | Specialty Ale | Premium Beer Yeast
A fun, unique yeast with a UK pedigree that emphasizes fresh malt flavor while producing fruity, citrus and floral flavors. Perfect for Pale Ales and IPA's. Every batch is PCR tested to ensure contamination free yeast. Dosage: One sachet is enough to treat a 5–6 gallon batch. When calculating for larger batches, use at a rate of 2–3 grams per gallon of wort. We recommend rounding up by one full sachet rather than measuring out the yeast exactly. Direct Pitch or Rehydrate: NECTAR yeast is designed to be sprinkled directly onto the surface of your wort with no oxygenation required in the initial fermentation. Our aerobic growth process makes this possible by creating dry yeast with high viability and high sterol levels. NECTAR yeast is pre-loaded with essential nutrients to ensure a successful, complete fermentation. While not required, some brewers prefer to rehydrate yeast. To hydrate yeast, first, sanitize the yeast brick and scissors. Use 10 grams of sterilized tap water between 85-95°F (29-35°C) mixed with 0.25 grams of FermStart per gram of yeast. Sprinkle yeast on the water. Allow the slurry to stand undisturbed for 20 minutes, then swirl. Use small amounts of wort to adjust to within 10°F (6°C) of wort temperature before pitching. Ferment between 63-72°F (18-22°C). Optimum Fermentation Temp: 63-72°F Flocculation: Medium Alcohol Tolerance: 12% ABV Similar Strains: N/A Attenuation: 75-80% Gluten-free
$4.49 $2.92
-
Replacement Tube for BrewZilla Sight Polycarbonate Sight Glass
Replacement tube only for BrewZilla Polycarbonate Sight Glass. Fittings are not included. 15.25" long. 5/8" OD
$7.69 $6.54
-
DigiMash Upgrade Kit for 65L DigiBoil
DigiMash Upgrade Kit for 65L DigiBoil. Includes everything you need to use the DigiBoil as an electric, digitally controlled mash tun. Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen Kegland Part Number: KL13055
$149.99 $112.49
-
Kegerator Replacement Line Kit | 1-3 Taps | Includes Stainless Tees, Clamps and Gas Line
Kegerator draft line kit for a triple tap tower. Kit Includes: Beverage line Measures 4mm ID x 8mm OD (5/32" x 5/16") 1 x 5.5' length per tap Gas line Measures 5mm ID x 8mm OD (13/64" x 5/16") 1 x 10' length Barbed tee fittings for splitting gas line Hose clamps
$5.99 $3.89
-
German Northern Brewer | Pellet Hops
Originally grown in Northern England, Northern Brewer has become one of the main hops grown in the Hallertau region of Germany. Northern Brewer is a great dual-purpose hop that is more balanced than U.S. Northern Brewer, which has been decreasing in acreage in the states year after year. Northern Brewer hops are known for their grassy, herbal, and piney aromas. Mostly used in European ales, Stout, Porter, and Lambic, but also a staple ingredient in California Common. Hop Statistics: Alpha Acids: 9 – 10% Beta Acids: 3 – 5% Alpha-Beta Ratio: 1.8 – 3.33 Cohumulone: (% of alpha acids): 27 – 32% Total Oils in mls per 100 grams dried: 1 – 1.6
$1.99
-
Falconer's Flight® | Pellet Hops
A harmonious medley of distinct citrus, stone fruit, and tropical characteristics, grounded in a woody and herbal tone An excellent complement to Pale Ales, West Coast IPAs, and NEIPAs Aroma Profile: Citrus, Herbal, Stone Fruit, Tropical Alpha Acids: 9.5 – 11.5% T-90 Hop Pellets Falconer's Flight hops are a new aroma and bittering hop blend for Pale Ales and IPAs. This proprietary pellet blend is comprised of many of the Northwest’s most unique hop varieties and is perfect for any Northwest-style IPA. Each hop has been hand selected for its superior aromatic qualities, imparting distinct tropical, citrus, floral, lemon and grapefruit tones. This allows you to get the complexity of a selection of top American aroma hops in one single addition. Typical Hop Statistics: Alpha Acids: 9.5 – 11.5% Beta Acids: 4.0 – 6.0% Total Oil: 1.0 – 2.0% Falconer’s Flight® is a registered trademark owned by Yakima Chief Hops.
$2.49 $2.12
-
Stainless - 2 in. T.C. Check Valve (1 PSI)
This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.
$109.99 $93.49
-
Inner Mesh Bag for Marchisio Stainless Bladder Press
Replacement inner mesh bag for Marchisio Stainless Bladder Presses. This nylon sack fits just inside the stainless pressing screen prior to loading the press and provides a quick and easy way to manage the pressed pomace. 300L -- WE170 450L -- WE175
$169.99 $144.49
-
Sansone Fusti Tank | Stainless Steel Water Dispenser | Stand & Tap Included | 0.52 Gallon | 2L
These premium Sansone tanks undergo a special pickling and polishing process to enhance their corrosion resistance, making them ideal for continuous use in both home and commercial settings Crafted from high-quality stainless steel with welded handles for long-lasting performance and easy transport La Nuova Sansone has been crafting high-quality stainless steel containers in Italy for over 40 years, earning a reputation for exceptional design and quality Stand and NSF-approved stainless steel spigot included The Sansone Europa-AQ model Fusti tank is made from 304 stainless steel with a mirror polish finish and welded handles. Compared to the standard Europa model, the AQ model undergoes an additional pickling and polishing process. This process improves corrosion resistance, which is key for continuous use, especially in commercial settings like wine bars, taprooms, and coffee shops that might use the tank as a self-service water station. Pickling Specialized acids are used to remove any surface impurities, scale, rust, and weld heat-tinted layers. This crucial step eliminates potential corrosion initiation points and ensures a uniformly clean and reactive surface. Furthermore, pickling promotes the formation of a passive chromium oxide layer, an invisible shield that protects the stainless steel from oxidation and enhances its inherent corrosion resistance. Polishing The pickling process is followed by a thorough polishing treatment. This creates an exceptionally smooth surface finish, minimizing microscopic imperfections where moisture and contaminants could become trapped and initiate corrosion. Polishing also refines the passive layer, making it denser and more uniform for superior protection. Beyond its practical benefits, polishing enhances the aesthetic appeal, making them suitable for even the most visible applications. Benefits The combined pickling and polishing treatments Sansone employs offer a multitude of benefits. The Europa-AQ model Fusti tanks exhibit significantly increased durability and longevity, withstanding harsh environments and frequent use. This enhanced corrosion resistance ensures the quality and taste of stored liquids are preserved, eliminating the risk of contamination from corrosion byproducts. The smooth, clean surfaces created by these processes also facilitate easy cleaning and sanitization, maintaining the highest hygiene standards. Specifications: Capacity - 2L (0.52 gal) Diameter - 170mm (6.69") Height - 150mm (5.90") Opening - 110mm (4.33") Empty Weight - 1.76 lbs Outlet - 1/2" BSP NSF Certified Made in Italy Stainless valve & PVC stand included
$109.99 $93.49
-
Balazs Hungarian Oak Barrel | Medium Toast | 112L | 29.6 gal
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests Superior in long term storage due to the tight grain and slow release of phenolic compounds Equivalent or superior quality compared to French Oak barrels at a much more affordable cost Zinc-plated steel barrel hoops for corrosion resistance Coopered by the world-renowned Balazs Nagy Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes. Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated. As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage. Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests. 112 L (29.6 gal) Height - 29.53" Head Diameter - 17.33" Abdomen Diameter - 21.65" Stave Thickness - 7/8 - 1" Empty Weight - 73 lbs Bung Hole - 45 mm Medium Long Toast Barrel hoops made from zinc-plated steel for corrosion resistance
$854.99 $726.74
-
Replacement Pump for Speidel Variable Volume Tanks
Stainless steel pump assembly for any variable volume fermenter. Includes built-in gauge and line to connect with gasket, but does not include gasket. Made by Speidel of Germany, this stainless pump is made to a higher quality than comparable replacment pumps made in Italy.
$208.99 $177.64
-
Cooling Snake | 1.5 Meters | 0.25 m² Surface Area
A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your wine to keep temperatures down. Can be used in a tank, macrobin, or barrel. The inner tube runs through the middle of the outer shell, but is shorter. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. .25m Square meter of Cooling Surface. Ideal for use in an Oak Barrel or Small Tank. Can also be used for heating. Optional silicone sleeve for sealing.
$241.99 $205.69
-
KOMOS® Premium Dual Gauge CO2 Regulator | Tool-Free One-Handed Tank Connection | 0–60 PSI
The most high-quality KOMOS regulator, featuring an integrated nut-hand-wheel that allows for effortless, one-handed tightening to your CO2 cylinder Internal components are accessible from the backplate for easy cleaning and servicing Includes a Duotight adapter for EVABarrier tubing and a 1/4" flare fitting with barb, allowing for quick and adaptable gas line setups The PRV is rated to 65 psi and can be swapped out with 17-psi, 35-psi, or 100-psi rated PRVs if desired Rubber gauge protectors safeguard gauges from potential damage Compatible with standard US CO2 tanks The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRV is rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread gas-out with included 1/4" barb and nut. Easily swap out the barb to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). Each KOMOS regulator includes a Duotight Adapter, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs. Features: One-handed Cylinder Tightening: Attach the regulator to your CO2 cylinder effortlessly with one hand using the integrated nut-hand-wheel. No separate spanner or wrench is needed! This is made possible by a new spigot seal design that compresses easily without the risk of damage or leaks. Simplified Self-Servicing: Maintain your regulator with ease by accessing the internal components from the backplate. Simply use an 8mm hex/Allen key to remove the regulator knob and access the internals for cleaning, eliminating the need for a vise or specialized tools. Flared Output: The regulator features an output with 1/4" male flare connection. Each regulator comes with a 1/4" barb and nut as well as an 8mm Duotight adapter for use with your preferred tubing. Triple-Scale Gauge: Monitor your CO2 pressure accurately with the Class 2.5 gauge, featuring PSI, bar, and kPa scales for easy reading (+/- 2.5% accuracy). Durable Seat Cap Assembly: The new seat cap is constructed from ultra-high molecular weight polyethylene, providing exceptional resistance to wear and tear. This robust design minimizes the risk of scratching and brass filings, which can lead to pressure creep, even under demanding conditions like forced carbonation. Reinforced Steel Gauges: Benefit from enhanced durability with thicker steel gauges built to withstand rigorous use. Color-Coded PRV: This regulator includes a 65 PSI green PRV (pressure relief valve). This can be swapped to the Red (35 PSI) or Gray (100 PSI) PRV if desired. Easy Mounting: Integrated M6 mounting holes allow for secure and convenient installation. Note that the nut-wheel needs to be removed for flush mounting. Specs: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI 1/4" & 5/16" barb fittings included Duotight adapter for EVABarrier tubing included Standard US CO2 Threads (CGA320) Gauge protectors M6 mounting screw holes Made in accordance with AS 4267
$74.99 $63.74
-
Citra® Brand HBC 394 | Cryo Hops®
Unanimously loved as a late addition or dry hop in Hazys, West Coast IPAs, Pale Ales, and other hop-forward styles Aroma Profile: Citrus, Stone Fruit, Tropical, Woody Alpha Acids: 21.0 – 28.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 21.0 – 28.0% Beta Acids: 5.0 – 9.0% Total Oil: 2.0 – 6.0% Citra® is a registered trademark owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
$4.99 $4.24
-
MB® Pressure Relief Valve | T.C. PRV | 2" Tri-Clamp | 1 BAR | 14.5 PSI | Stainless Steel
2" tri-clamp pressure relief valve. Calibrated to blow off at 1 BAR or 14.5 PSI.
$87.99 $74.79
-
EVABarrier Double Wall Draft Tubing | Transparent Red | 5 mm ID x 8 mm OD
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest Red is recommended for differentiating your gas lines, but the 5mm ID is the perfect size if longer 10-12 ft. beverage lines are needed Easily identify your gas and beverage lines with color-coded draft tubing. Transparent Red EVABarrier is recommended for gas lines while using LightShield Black for your bev lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. The semi-transparent red outer barrier makes the tubing easy to recognize even with minimal light. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. If you wish to use the tubing for beverage rather than gas, we recommend using 10-12 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42741
$28.49
-
Brewtools | Solenoid Valve | 1.5" T.C. | DC 24V
Solenoid valve made from stainless steel. Designed for glycol, water and air/co2. TC3mm ports in both ends for maximum flexibility. Coil and plunger Italian-made by ACL. The valve can easily ble disassembled and cleaned. Coil has DIN 43650 Type A connector (not included). Specifications: Ports: TC 1.5" / TC 1.5" Operation: NC (normally closed) Power supply: DC24V, 10W Orifice: Ø4.5mm Pressure rating: Max 3 bar / 43 PSI
$150.00 $127.50
-
Kveik Yeastery | K.14 Eitrheim | Multi-Strain Kveik Yeast | Dry Beer Yeast
Produces beers with dominant apricot and peach flavors, complemented by subtle notes of orange and pineapple Multi-Strain Kveik Yeasts are original blends of kveik yeast cultures rather than isolated single-strain yeasts Ferments effectively across a broad spectrum (59-100°F), offering flexibility for various beer styles Achieves complete fermentation in as little as 72 hours at optimal temperatures (88-95°F), speeding up the brewing process Well-suited for a variety of beer styles, including IPA, Pale Ale, NEIPA, Stouts, and Porters Eitrheim multi-strain comes from Reidar Eitrheim in Tokheim. The flavor and aroma primarily derive from apricot and peach, with secondary notes of orange and pineapple. Eitrheim ferments well between 59-100°F and will ferment faster at higher temperatures. At an optimal temperature of 88-95°F, you can expect fermentation to take up to 72 hours. Eitrheim is suitable for IPAs, pale ales, and NEIPAs. The Eitrheim kveik comes from Reidar Eitrheim from Tokheim, Norway. Tokheim is located close to Odda in the heart of the Hardangerfjord and next to the Folgefonna National Park. The yeast has been passed on for generations, and Reidar got it from his grandfather. The yeast is very versatile and can be used in different beer types such as IPA, Pale Ale, NEIPA, Stouts, and Porters. The Multi-Strain Difference Kveik Yeastery's unique multi-strain kveik yeasts capture the true essence of traditional Norwegian farmhouse brewing, delivering a depth of flavor and robust fermentation unmatched by single-strain alternatives. While other suppliers offer isolated kveik strains, Kveik Yeastery is the only source for authentic, dried multi-strain blends, providing brewers with the complex, nuanced profiles that define classic kveik. These diverse blends offer a superior brewing experience, unlocking the full potential of this remarkable yeast. Flavor and Aroma Primary flavors: Apricot and peach Secondary flavors: Orange and pineapple The intensity is medium at high fermentation temperatures, and at lower temperatures, it will be less intense. Fermentation Eitrheim ferments well from 59°F up to 100°F. The higher fermentation temperature, the faster fermentation. At the optimum temperature 88-95°F expect fermentation to finish in 72 hours. When fermentation is done at low temperatures you can expect fermentation time to increase. For high gravity beers, we recommend users to pitch two packs of yeast and add yeast nutrition to ensure a healthy fermentation. Pitching Pitch directly into wort by sprinkling it across the surface, or rehydrate yeast. For fermentation below 64°F, or high gravity, increase pitching rate to 2.25 g/Gal. One 7 g sachet treats 5 to 8 gallons of wort. One 300 g brewery pouch treats 8.5 bbl of wort. Effective Fermentation Temp: 59-100°F Optimum Fermentation Temp: 88-95°F Flocculation: Medium Alcohol Tolerance: 12% ABV Attenuation: Medium
$6.49
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 1.5"
Adapt any 3" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 3" T.C to 1.5" T.C. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port and attaching 1.5" tri-clamp fittings. 1.5" x 3" tri-clamp 7" tall Made from 304 stainless steel
$43.99 $37.39
-
ForgeFit® Soft Rubber Bumper for Brewery Hose Ends | 1"
This ForgeFit silicone hose bumper protects your fittings and the brewery floor from damage from constantly picking up and dropping the hose end. It also holds the end off the floor to keep it from getting contaminated, and has two large handles so you don't have to grab a hot hose to move it. This bumper requires some forceful stretching to get over the 1.5" TC fitting. 1.49" ID to stretch over most 1" brewery hoses.
$24.99 $16.24
-
Filtrox Filter Sheets | 40 cm x 40 cm | 0.7 Micron
40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.7 Micron for ultra-fine polishing of beverages or for preparing hard to filter beverages to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 0.7 micron pads are for ultra-fine polishing of the beverage, or for preparing hard to filter beverages to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets Wine Use: Ultra-fine polishing Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Cold Brew Coffee Use: Very fine filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
$107.99 $84.99
-
Filtrox Filter Sheets | 40 cm x 40 cm | 4 Micron
40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 4 Micron rating are for general polishing of beverages that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 4 micron pads are for general polishing of beverages that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Versafix XE 44 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22-36 psi (1.5-2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 8.5 gal/hr (32 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
$99.99 $84.99
-
Filtrox Filter Sheets | 40 cm x 40 cm | 10 Micron
40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 10 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 10 micron pads are considered to be a "rough" filtration and are typically used to prepare the beverage to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Versafix XE 24 Filter Sheets Wine Use: Prefiltration Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 21-30 gal/hr (80-112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
$82.99 $70.54
-
BrewBuilt® Ludicrous Coil | Temperature Control Coil | Cold Crash Capable
Upgrade standard and Plus model X-Series conicals with increased cooling performance Chill down to cold crashing temps when used with glycol and insulation; compatible with any vessel with a 4" T.C. opening Keg Connects and Floating Racking Buoy enable you to pressure transfer the clearest beer at the top of your fermenter 1.5" tri-clamp ferrule for use with additional T.C. accessories like the Pressure Fermentation Kit or Hop Bong Sanitary all stainless steel construction with 3/8" OD inlet/outlet for glycol connection Upgrade your standard model X-series conical with the ultimate in-solution chilling coil—the BrewBuilt Ludicrous Coil! Temperature control is one of the most important aspects of a healthy, happy fermentation. When your fermenting beer gets too hot, the yeast will likely impart off-flavors that can easily overwhelm the taste of your finished beer. The Ludicrous Coil offers a ludicrous amount of surface area (which means more cooling capacity) compared to other chilling coils you'll find. Not only does it manage your fermentation temperature with ease, the Ludicrous Coil has the capacity to chill beer to cold crashing temperatures when used with glycol and insulation. A truly unparalleled unit when it comes to in-solution chilling. You will also need a cold water source to provide the cooling solution. For maintaining ale temperatures, a cooler or bucker of ice water is sufficient in most cases and this method works well with the BrewBuilt Chiller Pump Kit. For maintaining lager temperatures or cold crashing, we recommend the IceMaster Max 2 Glycol Chiller and the Insulated Tubing Set. Sanitary all stainless steel construction with 3/8" OD inlet/outlet. Compatible with 3/8" ID flexible tubing & hose clamps or 9.5mm Duotight adapter. Specifications: Size Coil Height Float Tubing Length 7/14 Gal 18.5" 24" 27 Gal 24" 30" 38 Gal 33" 39"
$187.49
-
KegLand Quick Swivel Connector | 1/2" x 1/2" Straight Barb
High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Fits all male 1/2" NPT and BSP fittings 1/2" stainless steel barb tail The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation. These are ideal for the BrewZilla & DigiBoil ball valves, 25-Watt MKII Magnetic Drive Pump, or any 1/2" NPT or BSP connection. Specs: Stainless steel and silicone construction Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced 1/2" (13mm) stainless steel barb tail with 3/8" (10mm) ID bore KegLand Part Number: KL31639
$6.59 $5.60
-
Briess CBW® Sparkling Amber | Concentrated Brewers Wort | Liquid Malt Extract | LME | 11 SRM
Sparkling Amber is an excellent choice for Pale Ales, Reds, Ambers, and darker beers including Stouts and Porters Can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Concentrated Brewers Wort (CBW) Liquid Malt Extract (LME) from Briess. Briess CBW malt extracts get all of their color and flavor from base and specialty malts, never through additional boiling. CBW malt extracts are unhopped and nondiastatic for flexible, creative brewing. Sparkling Amber LME: 100% pure malt barley extract made from 100% malt and water. Typical Analysis: Color (8° Plato): 11 SRM Fermentability: 75% Solids: 79%
$14.99
-
Briess CBW® Bavarian Wheat | Concentrated Brewers Wort | Liquid Malt Extract | LME | 3 SRM
Bavarian Wheat is the perfect fermentable base for all your traditional wheat beers Can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Concentrated Brewers Wort (CBW) Liquid Malt Extract (LME) from Briess. Briess CBW malt extracts get all of their color and flavor from base and specialty malts, never through additional boiling. CBW malt extracts are unhopped and nondiastatic for flexible, creative brewing Bavarian Wheat LME: 100% pure malt extract made from 65% Malted Wheat and 35% Malted barley, and water. Typical Analysis: Color (8° Plato): 3.0 SRM Fermentability: 75% Solids: 79%
$14.99
-
KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt
Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet! T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More! The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3" tri-clamp. Compared to the standard "center inlet" pump head, the "inline" flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3" T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. The MKII is a perfect pump for your system and comes highly recommended for brewers stepping up to all-grain brewing. Rather than schlepping heavy kettles filled with hot liquor or wort around your brewery, or awkwardly stacking them into a 3-tier gravity setup, allow this handy pump to move liquid from vessel to vessel while everything remains in place. The magnetic drive allows you to slow down the flow without damaging the pump. This can be done by attaching a ball valve to the outlet side of the pump, and then you simply open or close the valve to control the flow rate. The pump itself is not self-priming, but priming is super easy thanks to the pull ring PRV which will help ensure the pump head is full of liquid and trapped air is released before powering it on. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer. Features: 110V / 60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min) Max Temperature: 248°F (120°C) 360° rotatable stainless steel pump head 1/2" BSP ports Water resistant casing (not waterproof) KegLand Part Number: KL27236 If you're brewing on a budget and want the most affordable pump possible, check out the standard model MKII pump. This has been our best-selling pump for years and you can always upgrade it down the road with the standard stainless center inlet head or inline stainless tri-clamp head.
$164.99 $140.24
-
Nelson Sauvin™ Brand, 85-03-06 | Cryo Hops®
Ideal for modern American pale ales, IPAs, West Coast Pilsners, and Hazys Aroma Profile: Citrus, Tropical, White Wine Alpha Acids: 23.0 – 27.0% Cryo Hops® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 23.0 – 27.0% Beta Acids: 12.0 – 16.0% Total Oil: 2.0 – 5.0% Nelson Sauvin™ is a registered trademark owned by New Zealand Hops. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
$45.99 $5.49
-
Replacement PRV | Pull Ring Pressure Relief Valve | Yellow | 17 PSI
Replacement pressure relief valve rated to blow at 17 psi. This corny keg lid style PRV can be used with a range of products including kegs, FermZilla conicals, KegLand kegmenters, and KOMOS CO2 regulators. If you don't intend to ever exceed 17 PSI with the product you're using, installing the Yellow PRV will help ensure you don't over pressurize. NOTE: This is a safety device designed to release pressure at the approximate rated pressure. This is not intended to be used as a Spunding Valve. KegLand Part Number: KL22569
$7.69 $5.00
-
Brewtools | Tri-Clamp Adapter | 2" T.C. x 34mm T.C.
TC Adapter 2" to TC34mm
$24.00 $20.40
-
MB® Stainless Steel Carbonation Stone | 27.5" Long | 3" Tri-Clamp x 1/2" NPT
Extra-large carbonation stone sized for 60 bbl fermenters and above Quickly carbonate finished beer in any stainless fermenter or brite tank with 3" tri-clamp connection Welded 1/2" FPT connection point feeds CO2 through the 17.75" long stone Made from stainless steel The MB carbonation stone can connect to any stainless fermenter or brite tank with 3" T.C. connection. The ferrule has a 1/2" female pipe thread connection point for your gas line. The overall length from the T.C. ferrule to the tip of the stone is 27.5" long with the stone section itself being approximately 17.75" in length. Specifications: 2 micron Overall Length: 27.5" Stone Length: 17.75" Single-piece design Made from Stainless Steel
$252.99 $215.04
-
Farro Glass Wide Mouth Carboys | Replacement Plastic Spigot | Twist Handle | Barbed End
Plastic spigot with 0.39" barb for wide mouth glass carboys, jugs, and beverage dispensers. Barbed end with twist handle. Direct replacement spigot for ported Farro Glass Wide Mouth Carboys.
$3.99 $3.39
-
WilliamsWarn BrewKeg12.5™ | Stainless Conical | Unitank Fermenter | 12.5L | 3.3G
The BrewKeg12.5 is a 12.5 liter capacity stainless steel, conical pressure fermenter with sediment removal and an easy to use lid with pressure relief valve. Suitable for all-grain, fresh wort or WilliamsWarn extract brewers who want to experience the magic results of pressure fermentation. Ferment under pressure and serve 12 L (3 gal) of beer (or cider!) from the same vessel without ever transferring! The BrewKeg from WilliamsWarn is a unitank that allows you to ferment, carbonate and serve all in one vessel, saving you money on other equipment. The BrewKeg lets you ferment up to 12.5 L (3.3 gal) of wort at up to 25 psi. The tank itself is 15 L giving it the perfect amount of headspace to give you 12.5 L (3.3 gal) of finished beer. Fermenting under pressure reduces esters allowing your beer to ferment at higher and more varied temperatures. Fermenting under pressure also produces clearer beer! The fermenter also includes a yeast collection ball so you can remove yeast and trub without having to rack to a separate vessel. The BrewKeg's all stainless steel construction and conical bottom make it perfect for extract, partial extract, and all-grain brewers. Features: Made from stainless steel Conical base Extra-large, easy to remove sediment ball 25 psi working pressure & built in relief valve 40 psi maximum pressure rating Ferments clean and clear beer from 64 - 82 F Beer is carbonated perfectly at the end of fermentation Beer ready to enjoy sooner Compact design fits in most kegerators Eliminates kegging Easy to clean and sanitize Dimensions: Height: 25.9 in. Diameter: 9.25 in. Actual Volume: 15.1L (4.0 gal)
$494.99 $420.74
-
MB® 2 bbl Brite Tank | Single Shell | T.C. Sanitary Ports | All Fittings Included | Carbonation Stone | Full Length Sight Gauge | Passivated Ready to Use | American Engineered | Ships from USA
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included! 15% extra headspace with a working volume of 2 bbl and max volume of 2.3 bbl True domed top and bottom with full length site gauge with sediment trap 2mm thick single shell design—See related product for the 2 bbl Jacketed Brite Ships domestically from within the contiguous United States Available Ludicrous Coil for glycol-supplied temperature control MB brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. The standard 1 & 2 bbl MB Brites feature a single shell design, sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons. Please note: these units do not have a built-in cooling jacket and are intended to be used in a walk-in cold room for temperature control. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 304 stainless steel construction True domed top and bottom Full length site gauge with sediment trap Pressure/Vacuum relief valve 1 Bar / 15 PSI Carbonation stone Sealed pressure gauge Analog temperature gauge Sample valve Center bottom tri-clamp drain Top vent/CO2 port with butterfly valve Pt10 Thermocouple interface Specifications: Grade 304 Stainless Steel 2mm thick single shell design Internal Finish: #2B Tank Height w/ Blowoff Pipe: 48.5" Tank Diameter w/ Fittings: 31" Empty Weight: 154 lbs Working Volume: 2 bbl Max Volume: 2.3 bbl Working Pressure: 1 Bar (14.5) All ports are 1.5" TC except 12" TC Dome Port and 4" TC Hopping Port Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
$2,419.99 $2,056.99
-
Stainless Elbow - 1/2 in. Male BSP x 1/2 in. Female BSP
Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06620
$5.49 $3.57
-
Heating Belt Fermentation Heater
This 30W Heating Belt will gently warm your fermenter without creating major hot spots. Heating belts are often chosen over heating pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. And they're especially useful for smaller vessels where a heating pad would be simply too large. For the best results, pair the Heating Belt with a temperature controller so that heating is only provided when your fermentation drops below your set point. If you're using a fermentation chamber or other form of chilling, the temperature controller will be able to switch between heating and cooling as needed. Comes with a standard 2-prong US style 110V plug. Please disregard the example photo that shows an AU style plug. KegLand Part Number: KL01953
$21.99 $14.29
-
Hanna Cleaning Solution for Wine Deposits (25 x 20mL Sachets) (Hanna# HI700635P)
The HI700635P is a highly effective cleaning solution that is specially formulated for use with pH electrodes that become coated with wine juice and must deposits. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna's line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. Specially formulated cleaning solution to remove wine deposits from a pH electrode Convenient, one-time use sachets ensure freshness of solution The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result. The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI700635P is a cleaning solution made specifically for the wine industry, where electrodes can become coated with wine particulates and deposits found in juice and must.and must. Light block foil packaging • Light-tight packet helps to prevent against degradation by UV light One-time use sachet packets • Ensures quality and freshness of solution Each sachet marked with lot number and expiration date • Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet. Specially formulated cleaning solution to remove wine deposits from a pH electrode Convenient one-time use sachets ensure freshness of solution Light-tight packet helps to prevent against degradation by UV light
$39.00 $33.15
-
Duotight Push-In Fitting - 8 mm (5/16 in.) x 3/8 in. BSP
This Duotight fitting with 3/8" male thread can be used to convert any female threaded 3/8" connection to Duotight. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18067
$3.29 $2.14
-
Neoprene Jacket for BrewBuilt® X1 Uni
Upgrade your base X1 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. This is the same jacket that is included with the X1 Uni+. Not compatible with the X1 Uni Pro conical or X2 Uni conicals.
$49.49
-
Beer Faucet Lock | Perlick 630 Series
The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can potentially be a beer draining arrangement. When you leave for the weekend, stop the flow with a faucet lock. A quick easy locking system that attaches directly to the faucet. Specifically designed for Perlick 630 series draft faucets. For standard beer faucets, please see D1274.
$32.99 $28.04
-
Digital Oven Thermometer
Simple and easy to use probe thermometer with alarm. The cable on this thermometer isn't waterproof so you shouldn't allow the probe to be fully submerged. If this does occur and you are getting incorrect readings you can place the probe in the oven (leaving the plug outside) and bake for 1 hour at 190C to boil the moisture out of the probe. Broad temperature operating range (0 degrees C / 250 degrees C) High accuracy of 1 degree C (0-100C) 1.5 degree C (100-250C) Temperature display resolution 1 degree Timer range 99min 59sec Timer alarm function High temperature alarm function Celsius and Fahrenheit display option Battery operated 1xAAA
$12.49 $10.62
-
Ripple Electric Heating Element - 5500W / 240V
Ripple-style electric brewing heating element with 1.5" tri-clamp connection. With 5,500 watts of power, this unit will easily heat 20+ gallons of wort. Measures 4" wide and 14.5" from TC connection to tip of element. Specs: 5,500 watts 240 Volt L6-30 plug 30 Amp breaker required In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.
$120.99 $90.74
-
Torpedo Keg Sleeve (10 & 15 Gal)
Neoprene keg sleeves for the 10 & 15 gallon Torpedo Kegs. For standard or Slimline Torpedo kegs, see KEG650 or KEG651. 6mm thick.
$32.99 $28.04
-
Mini Pressure Gauge (0-150 psi)
This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting. If you'd prefer a digital instant read gauge, check out the Digital Mini Pressure Gauge (for gas applications only). Pressure Range: 0-150 psi (0-10 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Note: These gauges are accurate to 10% of the whole pressure range. (ie the 0-30psi Gauge is accurate to +/- 3psi). KegLand Part number: KL1501
$7.69 $5.00
-
KOMOS® Cobra Draft Tower - Dual Tap
The KOMOS Cobra draft tower features a built-in glycol loop for chilling, making it a great option for commercial tap rooms or home bar enthusiasts looking for something really unique. The signature condensation on a glycol chilled draft tower will surely have your patrons clammoring for a pint! Using the glycol loop is optional and isn't required to appreciate the striking design of the Cobra tower. The towers come with female beer thread sockets and do not include shanks or faucets. We recommend the stainless Cobra Tower Shank and stainless Intertap forward-sealing faucets. When installing the shanks you will also need a tailpiece gasket to create a good seal. For chilling the tower we highly recommend the KOMOS DraftMaster glycol chiller. This unit features a built-in submersible pump intended for pushing glycol or ice water through the Cobra tower's cooling loop. The pump can be turned on independently to circulate cooling solution constantly while you're serving from the tower, and then turned off when not in use. The DraftMaster also has 4 built-in draft coils that sit in the glycol reservoir, so you can serve from kegs at room temperature by passing the beer through the chiller on its way to your faucet. Features: Dual Tap Glycol Loop 8mm OD stainless steel lines Female Beer Thread (5/8" BSP) sockets for attaching shanks Made from cast brass with chrome plating Faucets and faucet shanks not included Dimesnions: Height: 14.16 inches from mounting plate Width: 4.16 inches Shank: 1 inch OD Please note: the beverage lines and glycol loop do not come marked. To identify them, blow air into the lines. If the air comes out of another line, that's the glycol loop. If the air comes out at the shank socket, it's a beverage line. Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
$175.99 $149.59
-
BrewBuilt® SlingBlade Electric Heating Element (240V)
The BrewBuilt SlingBlade is an innovative electric heating element designed to promote a rolling boil and even heat distribution. Shaped for Performance and Convenience The SlingBlade's unique crescent-shaped design positions all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a dynamic turbulence that evenly distributes heat while creating a vigorous, rolling boil. Other heating elements stick right out into the middle of the kettle or use a full circle design that rings the kettle wall. This can cause an obstruction for immersion chillers or make it difficult to stir without banging into the element. The SlingBlade was designed to avoid these issues. By remaining on one side of the kettle, the element will be out of the way of your immersion chiller, and since the element follows the curvature of the kettle wall, it won't interfere with the flow of wort during whirlpool. Ultra-Low Watt Density An electric element transfers power to your wort by applying heat, but if this heat is too concentrated you will get local heating that is hotter than 212°F. This catalyzes Maillard Reactions, which can lead to darker beer than intended and produce unwanted caramelization. Think of these reactions like roasting a marshmallow. First it gets a light brown, we call this Maillard reactions, a little hotter and it gets a dark brown, we call this caramelization, then it turns black and we call this pyrolysis (burnt or scorched). While all kettles undergo these reactions, an electric element can concentrate more heat into a small area, which can quickly scorch your wort. Our experience is that at 90-watts per square inch recipes need to be modified to account for the element and light beers never come out quite right. The SlingBlade element was designed at 50-watts per square inch to reduce the chance of scorching while still providing a vigorous boil. For even lower watt density, consider the Boil Vigor Controller. Tri-Clamp Connection The SlingBlade installs quickly and easily on any kettle with a T.C. ferrule thanks to the curved, non-circular design. This also makes it a breeze to remove the element for cleaning between uses. The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below. Features: Made from Incoloy alloy with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 22 & 31 gal element 50-gallon kettle requires 2 x BE538 and 2 x 30 amp circuits SKU Kettle Vol. Wattage Length Radius Min. Kettle Ø BE535 10 gal 3750 13.25" 6.3" 13.78" BE536 15 gal 4500 16.75" 7.3" 15.75" BE537 22 gal 5000 17.25" 8.3" 17.72" BE538 31 gal 5750 19.5" 9.3" 19.69" Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve. ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.*** Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
$119.99 $89.99
You have seen 288 out of 741 products