Up to 35% Off · Ends June 30
Everything On Sale
744 products marked down through the end of June. Shop by brand below or scroll the full lineup.
-
BrewBuilt® 1.5" Tri-Clamp Blowoff U Barb
The Blowoff U Barb eliminates tubing kinks by extending over the shoulder of a stainless conical fermenter and directing tubing straight downward. This gives you the advantage of a stainless steel blowoff cane, but is much easier to clean and sanitize. The 5/8" OD barb is perfect for forming a tight seal with 1/2" ID silicone tubing. Measures approximately 4" from T.C. to barb. 1.5" T.C. 5/8" OD barb Made from 304 stainless steel
$29.99 $22.49
-
MB® Conical Reactor Rod | 4" T.C. | 2 bbl
This Reactor Rod was custom built to be used with the 2 bbl MB Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 41" long measured from the bottom of the T.C. fitting.
$274.99 $178.74
-
Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | 1/4" MPT
Torpedo keg gas in ball lock quick disconnect. 1/4" MPT connection. Made from stainless steel. Please note: this is not a flared disconnect. The connection is 1/4" male pipe thread.
$24.99 $16.24
-
Kegmenter Fermenting Keg - 50L/13.2 Gal
Most winemakers appreciate the simplicity of using a keg for topping up barrels... apply nitrogen or argon gas pressure and you top up your barrels as needed. The Kegmenter fills this need perfectly with a large 4" TC lid and ball lock posts. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Features: Rated up to 3.5 BAR (50 psi) 4 in tri-clamp lid Ball lock posts built into lid Floating dip tube Pressure Relief Valve Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon ferments Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing co2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures As a cellar keg for topping up barrels Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04565
$329.99 $280.49
-
Vic Secret | Pellet Hops
Vic Secret is an Australian hop known for its bright tropical character of pineapple, pine, and passionfruit. Similar to Galaxy but with a lighter profile. Highly recommended as a whirlpool or dry hop addition where the tropical notes will really shine. Displays a more earthy character when added late in the boil. Hop Statistics Alpha Acids: 14 – 17% Beta Acids: 5 – 9% Alpha-Beta Ratio: 1.9 - 3.4 Cohumulone: (% of alpha acids): 51 – 57% Total Oils in mls per 100 grams dried: 1.9 – 2.8 Similar Hop Varieties: Galaxy
$3.49 $2.97
-
Non-Return Kit for Chilly 45 Glycol Chiller
If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves at all of your tanks are closed and the chiller's pump turns off. This Non-Return kit works with Kreyer Chilly chillers (25, 35, 45) to prevent this situation. The kit includes a one-way check valve which is installed inline on the chiller's outlet, and an electric solenoid valve installed on the chiller's inlet. The solenoid valve is wired to the relay that controls the chiller's pump such that when the pump turns off the valve closes. Simple to install and completely automatic, this kit allows you to keep the chiller's reservoir full and not worry about the placement in relation to the rest of your glycol system.
$299.99 $254.99
-
BrewKeg Pressure Gauge
Connects to the Gas port on the BrewKeg10 lid and reads the pressure inside the BrewKeg10
$71.99 $61.19
-
Beer Faucet Shank | 5.5" | Welded 1/4" Barb | Includes Plastic Collar
Comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 4 3/8". Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/2" - Shank Length (Without Nut & Nipple) 4-1/8" - Thread Length 5-1/4" - Pass Through Length
$21.99 $18.69
-
Stainless Hood for Braumeister
Upgrade your Braumeister with this Stainless Steel Hood! Combined with the Insulating Jacket, these pieces will improve the boil of your brau, both getting you to temp faster, and making the boil more vigorous. Compatible with all generations of Braumeister, made before or after 2015.
$159.99 $135.99
-
Idaho #7 | Pellet Hops
Idaho #7 hops are known for their piney, tropical, fruity, citrusy, earthy, and floral flavors and aromas. Typically used as an Aroma/Flavor hop with high alpha acid levels and average cohumulone content. Its strong hop character makes it ideal for IPAs, APAs and any other hop forward beer. Suggested as a single hop or for blending as a late addition. The high oil content and soft pelletizing process make this ideal for dry hopping and whirlpool. Hop Statistics: Alpha Acids: 10 – 14.9% Beta Acids: 4.0 – 5.0% Total Oils in mls per 100 grams dried: 1.0 – 1.6 Storage(% alpha acids remaining after 6 months storage at 68° F): 60 - 65% Similar Hop Varieties: Amarillo® hops, Chinook, Columbus
$2.49
-
Drafto Kit for the Ultimate Growler
The Drafto Kit is a great addition to any Ultimate Growler (GL750) that allows you to pressurize and preserve your beer for longer. Never have your growler go flat again! It's simple and easy to use; just replace the the original cap on your Ultimate Growler with the Drafto Kit, attach a mini CO2 regulator, pressurize and serve. Note: Does not come with CO2 regulator or cartridge. They must be purchased separately. We suggest one of our mini CO2 regulators (KEG965A) and cartridge (KEG962) or (KEG96) and cartridge (KEG993). Please Note: This unit Should Not be used with unregulated CO2 sources. Kegland Part number: KL0429
$18.74 $15.93
-
Sultana™ | Experimental #06277 | Pellet Hops
Sultana™, AKA Experimental Variety 06277/ Denali™, is a new hop bursting with flavor. Called Nuggetzilla by some, this hop is rich in pineapple, citrus, and pine flavors, though it can often come off as spicy as well. It can be used for bittering, flavor, or aroma, and is sure to make an impact! These have rich characteristics that make for an unmistakeable beer. Try it in your next pale ale or IPA, sit back, and enjoy the results. The genetic origin of this hop is 50% Nugget, 25% Zeus, 25% USDA 19058m Hop Statistics: Alpha Acids: 13 – 15% Beta Acids: 4.5 – 7.0% Alpha-Beta Ratio: 2.6 - 3.75 Cohumulone: (% of alpha acids): 22 - 26% Total Oils in mls per 100 grams dried: 2.5 - 4 Storage (% alpha acids remaining after 6 months storage at 68°F): N/A Similar Hop Varieties: N/A Sultana™ is a trademark owned by S. S. Steiner, Inc
$1.99
-
Ethiopia Sidama Hantate | Green Coffee Beans
Experience the balanced and nuanced profile of our Ethiopia Sidama, Pulped Natural Processed green coffee beans. Grown in the esteemed Sidama region, these pulped natural (honey processed) beans offer a sweet and complex cup with stone fruit notes and delicate floral hints. Cupping Notes: Flavor: Expect a pronounced sweetness reminiscent of ripe stone fruits, such as peach and apricot. Floral notes, like honeysuckle and jasmine, are complemented by hints of juicy berries and a delicate citrus undertone, such as mandarin. Body: A smooth, medium to full-bodied texture with a syrupy, lingering mouthfeel. Aroma: Fragrant aromas of ripe stone fruit, honey, and delicate floral blossoms. Origin: Sidama, Ethiopia Altitude: Typically 1500-2200 meters Varietal: Heirloom Ethiopian varieties Process: Pulped Natural Processed (Honey Process)
$10.99
-
BrewBuilt® Mash Tun False Bottom Gaskets
These are replacement gaskets for the BrewBuilt Mash Tuns. Single Piece silicone construction, with a branded BrewBuilt logo and size molded into them. These are Replacements for the gasket included in our False Bottom Kits or BrewBuilt Mash Tuns, and will not function without a BrewBuilt Kettle and false bottom kit. Please note: We have designed these around our BrewBuilt kettles line, and they are not intended to work with other Kettles.
$10.39
-
Kenya Nyeri | Green Coffee Beans
Experience the exceptional clarity and complexity of our Kenya Nyeri, Wet Processed green coffee beans. Grown in the renowned Nyeri region, these washed beans offer a vibrant and intensely flavorful cup with bright acidity and distinctive blackcurrant notes. Cupping Notes: Flavor: Expect a vibrant and juicy cup with prominent notes of blackcurrant and ripe berries. A bright, citric acidity, reminiscent of grapefruit and lime, is complemented by hints of tomato leaf and a subtle, winey undertone. Body: A medium-bodied texture with a crisp, clean finish and a lingering, juicy sensation. Aroma: Intense aromas of blackcurrant, citrus zest, and a vibrant, floral fragrance. Origin: Nyeri, Kenya Altitude: Typically 1700-2000 meters Varietal: SL28, SL34, Ruiru 11, Batian Process: Wet Processed (Washed) Key points about Wet Processing in Nyeri: Kenya Nyeri coffees are highly regarded for their exceptional quality and distinctive flavor profiles. The region's high altitudes, rich volcanic soils, and meticulous processing methods contribute to the complexity of the coffee. Wet processing ensures a clean, bright cup, highlighting the intense blackcurrant notes and vibrant acidity that are characteristic of Nyeri coffees.
$13.99 $11.89
-
Papua New Guinea Arokara | Green Coffee Beans
Discover the unique and vibrant profile of our Papua New Guinea Arokara, Wet Processed green coffee beans. Grown in the lush highlands of Papua New Guinea, these beans offer a complex cup with tropical fruit notes and sweet spice. Cupping Notes: Flavor: Expect a vibrant cup with notes of tropical fruits, such as pineapple and mango, complemented by a sweet spice profile reminiscent of ginger and nutmeg. Hints of citrus, like grapefruit, and a subtle earthy undertone add complexity. Body: A medium-bodied texture with a clean, slightly syrupy finish. Aroma: Fragrant aromas of tropical fruit, sweet spice, and a hint of floral sweetness. Origin: Papua New Guinea (Arokara region) Altitude: Typically 1500-1800 meters Varietal: Arusha, Typica Process: Wet Processed (Washed)
$10.99 $9.34
-
MoreBeer!® Trucker Hat - Black and Tan
Black and Tan trucker hat with stitched logo. Something about black and tan says beer, we just don't what it is.
$19.99 $16.99
-
Replacement Power Cord | 6 ft.
Replacement power cord with NEMA 5-15 Plug x Wire Leads. 125V AC.
$14.99 $12.74
-
The MoreBeer!® Growler (64oz)
This 64 oz growler is the perfect way to transport beer in style! These are half gallon glass growlers with the MoreBeer! logo screened onto the front and cursive text reading "Life is too short to drink cheap beer" on the back. *NOTE* Does not come with a cap - must be purchased separately. See our GL510B.
$8.99 $7.64
-
March Nano Brewery Pump
Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump. *Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble. Homebrewing Tips: 1. Great for Whirlpooling 20 gallons of wort or more. 2. Ideal for our Counterflow Chillers WC90. Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup. Statistics Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head Max Head: 27 ft. at 1 GPM Inlet: 1" FPT Outlet: 1/2" MPT Materials in Contact with Beer Polysulfone Stainless Steel Buna N Ceramic
$543.99 $462.39
-
March 815-PL High Temperature Brewing Pump - High Flow
The History of March and Homebrew Many years ago we worked with March Pumps to release what is now the standard pump in the homebrewing community, their model 809 (our H315) with a polysulfone head and 6' cord with plug. Thousands and thousands of these pumps have been sold to homebrewers. The New Design Now, with a slight design modification, the new model nearly eliminates past cavitation issues (where the impeller spins in an air pocket and no liquid moves). We've been testing/using the pump with our BrewSculptures for several years now and are extremely happy with the results, so much so that we are completely replacing the H315 with the high flow model. Still Works the Same The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation. The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump below the level of the liquid source. This pump cannot be run dry. Features List Addtional Notes To restrict flow place a ball valve on the out flow of this pump. This is the pump we install and use on all of our BrewSculpture brewing systems We stock polysulfone replacement heads, H317, in case the threads are damaged. If you are looking for a pump for a larger home brewery or small nano brewery you can also look at our H325 Nano Brewery pump from March. Included bracket for mounting 6' power cord with plug wired in for easy use 115V - 50/60Hz Maximum flow of just over 7 gpm (at zero head) Maximum head of 18 feet (at zero flow) 1/2" mpt fittings on both inlet and outlet. Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor Motor is fan cooled Will handle internal pressures to 50 psi. Max temp rating: 250F Face unscrews and rotates at 90 degree intervals to adjust to your application. Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!
$275.99 $234.59
-
Stainless Tri-Clamp Reducer | 3" T.C. x 1.5" T.C.
Stainless steel Tri-Clamp reducer with 3" T.C. and 1.5" T.C. connections.
$32.99 $21.44
-
Gasket for 2in Butterfly Valve
Replacement interior gasket for the H661B 2" Butterfly Valve
$14.49 $12.32
-
Boadicea Hops (Pellets)
Released by the Horticulture Research International (HRI) at Wye College in the UK in 2004, Boadicea is a product of ‘open crossing’ of aphid resistant hedgerow varieties. Light bodied and rounded bittering characteristics, an excellent hop for finishing and dry hopping. Recommended for English-style pale ales, IPAs, stouts and porters. Earthy, floral, spicy, and resinous. Hop Statistics Alpha Acids: 6.0 – 9.0% Beta Acids: 3.0 – 4.0% Alpha-Beta Ratio: 1.5 – 3.0 Cohumulone: (% of alpha acids): 21 – 27% Total Oils in mls per 100 grams dried: 1.4 – 2.0
$2.19 $1.66
-
Alternate Baskets for the EnoItalia Delta Zero Destoner
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Delta Zero comes standard with 6 mm diameter holes, which is perfect for most plums, apricots and peaches. Alternate baskets with various hole sizes are also available, allowing the destoner to be used with a wide range of produce. Reference the chart below for the recommended hole size to suit your needs. Some fruit have multiple recommendations dependent on how large or small the fruit is. Diameter Recommended Use 0.6 mm Berries, apples, pomegranates, strawberries 0.8 mm Berries, apples, pomegranates, strawberries 1.2 mm Tomatoes 1.5 mm Tomatoes 2 mm Olives 3 mm Cherries 6 mm Plums, apricots, small peaches 8 mm Peaches
$641.74
-
ILTEC Ultrafiller 2 | Vacuum Bottle Filler | 2 Spout | Pneumatic
Adjustable filling height with automatic stop Stainless steel base, frame, and filling nozzles Adjustable filling level and filling speed Vacuum gauge The Ultrafiller 2 is built entirely in stainless steel with PYREX tank, featuring two high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 2, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components. Why Choose ILTEC While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves: Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation. Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process. The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand. Specs: Capacity: 400 x 750mL bottles per hour* Bottle Neck Diameter: 16-34mm Bottle Height: 7" to 13.75" (180-350mm) Tank Alcohol Tolerance: 80% ABV Max Temperature: 176°F (80°C) Dimensions: 13" x 21.6" 16.5" (330 x 550 x 420mm) Weight: 42.3 lbs Power: Compressed Air *Capacity may change depending on liquid and bottle size.
$1,899.99 $1,614.99
-
Speidel Storage Rack for Flat Bottom Tanks | BO/BD/UF | 550mm
Stainless steel storage rack for Speidel Flat Bottom Tanks 550mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 220L tank GER220VF. Base Height: 15.9"
$214.99 $182.74
-
EnoItalia Deluxe Wine Bottle Filler | 6 Spout | Benchtop Bottle Filler | Electronic Level Sensor | Nitrogen Injector | Stainless Steel | 980L/h Fill Rate
Portable, benchtop gravity-style wine bottle filler Deluxe model with electronic level sensor and nitrogen injector valve Six filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 66L reservoir Fill up to 100 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Fill up to 100 cases of 750ml bottles per hour. The Deluxe model comes with an electronic level sensor that can be wired to a pump and a manual nitrogen injector valve mounted to the side. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 66L reservoir 110 pounds 42" H x 34" W x 20" D Please note: the example photo shows the 4-spout version of the bottle filler.
$3,464.99 $2,945.24
-
Ferrari Fast Wire Hooding Machine | Manual Wire Fastener | Stainless Steel
Professional-level wire fastener offers quick and easy manual operation Adjustable height bottle platform can accomodate bottles from 375 mL up to 9 L in size High-quality stainless steel construction Made in Italy by Ferrari Fasten your wire retainers quickly and easily with the Ferrari Fast Wire Hooding Machine. This professional-level manual wire fastener features an adjustable bottle platform suitable for up to 9L bottles, a bottle centering beam to perfectly line up the bottle neck every time, and boasts solid stainless steel construction throughout. Once your corked bottle is lined up, simply place a retainer on the cork with the eye of the wire hood facing the twisting hook, push the compression lever downward to hold the bottle in place, then hook the wire and rotate the handwheel clockwise three turns to secure the hood under the lip of the bottle. Compatible with bottle sizes from 375 ml to 9 L Stainless steel construction Made in Italy by Ferrari Group 11.8" L x 13.3" W x 37.4" H
$1,115.99 $948.59
-
Balazs Hungarian Oak Barrel | Mild Toast | 3L | 0.79 gal
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests Superior in long term storage due to the tight grain and slow release of phenolic compounds Equivalent or superior quality compared to French Oak barrels at a much more affordable cost Zinc-plated steel barrel hoops for corrosion resistance Coopered by the world-renowned Balazs Nagy Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes. Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated. As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage. Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests. 3 L (0.79 gal) Height - 9.84" Head Diameter - 5.91" Abdomen Diameter - 7.48" Stave Thickness - 0.39 - 0.59" Bung Hole - 20 mm Empty Weight - 4.4 lbs Mild Toast Barrel hoops made from zinc-plated steel for corrosion resistance Rack included
$159.99 $135.99
-
Speidel Flat Bottom Fermentation and Storage Tank | Stainless Steel | 95L
High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Great for storage of wine, cider, juice, kombucha, or whatever else you may be making in 25 gallon batches! Features: 304 SS construction IIId surface finish - easy cleanup 95 l (25.1 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 68 cm (26.7") Height x 44 cm (17.3") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
$614.99 $522.74
-
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #25
Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 5-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #25 specifications: Basket diameter: 10 inches Basket height: 14 inches Basket capacity: 5 gallons Ship weight: 51 pounds Manufacturer: Fratelli Marchisio (Italy)
$569.99 $484.49
-
Stainless Steel Stand for Marchisio Variable Volume Tanks | 80 cm
A convenient bolt-together stand made from Stainless Steel to raise your tank off of the ground, allowing for easier sampling, racking, and cleaning! Fits tanks with approximate diameter of 80 cm (31.5".) Will raise your tank approximately 15" off the ground.
$219.99 $186.99
-
Wine Cap Punch Down Tool w/ Handles | Stainless Steel | 72 in. Long | 12 in. Diameter
Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed ends for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 7lbs. Shipping weight is calculated at 70 lbs because these ship at FedEx oversize 2 rates. 72" Height
$274.99 $206.24
-
Wine Cap Punch Down Tool | Stainless Steel | 46 in. Long | 12 in. Diameter
Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed end for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 5lbs. Shipping weight is 30lbs as these ship out as a UPS oversize 1 package. 46" Height
$186.99 $140.24
-
Marchisio Wine Plate Filter | Noryl Plates | 20x20 | 20 Plate | Stainless Rolling Cart | 600L/h | 110V
Rolling cart wine plate filter Plates made from food-grade Noryl Built-in stainless centrifugal pump Built-in pressure gauge 1.5" tri-clamp inlet/outlet 600L/h wine filtering capacity Made in Italy by Marchisio Small commercial plate filter that will accomodate 20 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler. Features: 304 Stainless Steel Construction Four Casters for easy movement. Two of the casters have locks Built-in centrifugal stainess steel pump with on/off switch 21 Food-Grade Noryl plastic plates included. Double filtration kit available Built-in pressure gauge Maximum pump pressure is 2.5 bar (35 p.s.i.) Up to 600L (158 gal) Flow rate per hour 620x420x560mm/24x16.5x22 inches 90 lbs 1.5" Tri-Clamp inlet and outlet Pads should be placed in the machine rough-smooth-smooth-rough
$3,269.99 $2,779.49
-
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #35
Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 13-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #35 specifications: Basket diameter: 14 inches Basket height: 19 inches Basket capacity: 13 gallons Ship weight: 101 pounds Manufacturer: Fratelli Marchisio (Italy)
$1,094.99 $930.74
-
Murray Red Cabernet Mataro Merlot Wine Making Kit | VineCo Global Passport Series™ 2026 | While Supplies Last!
VineCo's Murray Red Cabernet Mataro Merlot Wine Making Kit is now in stock and ready to ship. Grab this limited-edition kit while you still can! Murray Red honors Australia’s mighty Murray River, that plays a crucial role in supporting Riverland vineyards Aromas of ripe blackcurrant and plum, layered with notes of red cherry and raspberry Full-bodied and dry, 14% ABV Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks Premium kit includes grape skins for an authentic wine making experience Bottle labels included for a professional finish Murray Red honors Australia’s mighty Murray River, that plays a crucial role in supporting Riverland vineyards. It provides essential irrigation, moderates the dry climate, and enriches the regions fertile soils. A bold and expressive blend of Cabernet Sauvignon, Mataro and Merlot from the sun kissed vineyards of Riverland, Australia. Murray Red is full-bodied and structured with intense aromas of ripe blackcurrant and plum, seamlessly layered with notes of red cherry and raspberry. On the palate, dark fruit dominates while subtle spice emerges with hints of cracked black pepper and dried herbs, adding depth and complexity to the fruit-forward profile. Firm but well-integrated tannins pair with balanced acidity, leading to a smooth finish that leaves a lingering impression. About the Region: Riverland, Australia Stretching along the sunbaked banks of the Murray River in South Australia, Riverland is one of the country’s largest and most vital wine regions, defined by its warm Mediterranean climate, abundant sunshine, and access to consistent irrigation. These conditions create an ideal environment for reliable ripening and expressive, fruit-forward wines. Robust red varieties like Cabernet Sauvignon, Mataro, and Merlot benefit from the long growing season, ample sunshine and fertile soils. Food Pairings: Grilled lamb chops with thyme Mushroom risotto Blue cheese Key Features: Flavor Profile: Aromas of ripe blackcurrant and plum Sweetness Level: Dry Oak Influence: Heavy Body: Full Alcohol By Volume (ABV): 14% Kit Volume: 14 L Approximate Yield: 23 L Ready to Bottle: 6 - 8 weeks Bottle Labels: Included Grape Skins: Included
$199.99 $169.99
-
Tinto Fuego Carmenère Syrah Wine Making Kit | VineCo Global Passport Series™ 2026 | While Supplies Last!
VineCo's Tinto Fuego Carmenère Syrah Wine Making Kit is now in stock and ready to ship. Grab this limited-edition kit while you still can! Tinto Fuego embodies the heat and passion of Chilean winemaking, reflecting Chile’s sun-drenched days and cool Andean nights Rich aromas of blackberry, black cherry, blueberry, and ripe plum with a palate enhanced by nuances of dark chocolate, black pepper, and a touch of warming spice Medium-Full body and dry, 13% ABV Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks Bottle labels included for a professional finish Tinto Fuego embodies the heat and passion of Chilean winemaking. Meaning “red fire”, the name reflects Chile’s sun-drenched days and cool Andean nights. This dramatic contrast in temperature brings vibrant acidity and deep, intense flavors. Tinto Fuego a blend of Carmenère and Syrah from Chile’s renowned Maipo Valley is a rich, vibrant red that seamlessly marries the depth of Carmenère with the power of Syrah. It offers a plush texture with well-integrated tannins that lend structure without overshadowing the fruit. The nose is inviting and layered, revealing rich aromas of blackberry, black cherry, blueberry, and ripe plum. On the palate, these dark fruits are enhanced by nuances of dark chocolate, black pepper, and a touch of warming spice. The finish is long, savory, and satisfying, unfolding slowly with lingering notes of earth and spice. About the Region: Maipo, Chile Maipo, known as Chile’s most renowned wine region lies at the foot of the Andes, where warm, sunny days and cool nights create the perfect conditions for growing expressive reds. The valley’s well-drained alluvial soils lend structure, while the diurnal temperature shifts preserve acidity and aromatics. This unique climate creates wines with ripe fruit character, fine tannins, and distinct earthy undertones. Whether showcasing spicy Carmenère or peppery Syrah, wines from Maipo reflect a balance of ripeness, elegance, and a strong sense of place rooted in the valley’s long viticultural heritage. Food Pairings: Grilled beef skewers with chimichurri Stuffed peppers Manchego Key Features: Flavor Profile: Aromas of blackberry, black cherry, blueberry, and ripe plum enhanced by nuances of dark chocolate, black pepper, and a touch of warming spice on the palate Sweetness Level: Dry Oak Influence: Medium-Heavy Body: Medium-Full Alcohol By Volume (ABV): 13% Kit Volume: 14 L Approximate Yield: 23 L Ready to Bottle: 6 - 8 weeks Bottle Labels: Included
$199.99 $169.99
-
Sabro™ Brand HBC 438 | Pellet Hops
Sabro® Hops – Bursting with Tropical, Citrus, and Coconut Complexity Sabro® is a powerhouse of flavor and aroma, delivering an unmistakable mix of tropical fruit, creamy coconut, and zesty citrus. As a proprietary hop developed by the Hop Breeding Company, Sabro® (HBC 438) is revered for its intense, complex, and unique character—making it a go-to for IPAs, hazy beers, and creative hop-forward styles. Aroma & Flavor Profile: 🥥 Coconut Cream – A rare and distinctive creamy coconut note. 🍊 Citrus & Tropical – Bursting with tangerine, lime, and tropical fruit. 🌿 Herbal & Woody – Hints of cedar, mint, and earthy undertones. Brewing Characteristics: ✔ High Oil Content – Delivers an expressive aroma, even in small doses. ✔ Balanced Bitterness – Smooth and drinkable with a soft finish. ✔ Versatile Usage – Perfect for whirlpool, dry-hopping, and late additions. Elevate your next brew with Sabro®, and experience a hop unlike any other—a perfect harmony of tropical fruit, citrus, and creamy coconut. ➡ Best for: Hazy & West Coast IPAs, Pale Ales, Stouts, Lagers, and Experimental Brews. Hop Statistics Alpha Acids: 12.0 – 16.0% Beta Acids: 4.0 – 7.0% Alpha-Beta Ratio: 1.7 - 4.0 Cohumulone: (% of alpha acids): 20 – 24% Total Oils in mls per 100 grams dried: 2.5 – 3.5 Sabro™ is a trademark owned by Hop Breeding Company, LLC
$2.49
-
Ekuanot® Brand HBC 366 (Equinox) | Pellet Hops
Ekuanot® is one of the newest hop varietals released and has been received with much acclaim. Released in 2014, Ekuanot® (formally Equinox and HBC 366) has surged in popularity and growing acreage. The ridiculously high oil content (2.5-4 ml/100g!) and desirable aromatics have lead breweries of all sizes to flock to this hop. Great for all beer styles but definitely featured in IPAs and other hop forward beers. Ekuanot® is described as having aromas of melon, berry, orange peel, lime, papaya, pine and fresh peppers. Try it in your next batch and see what flavors you find! Hop Statistics: Alpha Acids: 13 – 15.5% Beta Acids: 4.0 – 5.0% Cohumulone: (% of alpha acids): 31 – 36% Total Oils in mls per 100 grams dried: 2.5 – 4.0 Hops are packaged in oxygen and light barrier bags. Ekuanot® is a registered trademark owned by Yakima Chief Hops, LLC.
$2.29 $1.95
-
Tenco Pneumatic Bottle Corker | Benchtop Wine Bottle Corker | 400 Bottles/Hour - Refurbished
Cork up to 400 bottles per hour with the StarCap pneumatic corking machine Air-driven semi-automatic bottle corker makes the process efficient and effortless Compatible with all natural, agglomerated, collated, and 1+1 agglomerated corks Air pressure regulator with manometer allows for pressure adjustments depending on the cork being used Made in Italy by Tenco The StarCap semi-automatic bottle corker from Tenco provides excellent corking capacity for small wineries or avid home vintners. It is pneumatically driven so you will need an air compressor to operate the corking action. Wine corks are manually inserted into the cone then, by pressing the two start buttons, the cork is inserted into the bottle neck of the wine bottle by slightly compressing the cork. The StarCap machine guarantees perfect integrity, doesn’t create seems on the surface, and doesn’t affect the material in any way. Our customers who love this corker are primarily using it because using a traditional floor corker to cork hundreds of bottles of wine is physically taxing... unless you have a lot of help. If you have a lot of help on bottle day running two floor corkers is approximately the same speed. Specifications: Capacity: 400 bottles/hour Power: Compressed Air Air Connection: Push-to-connect fitting for 8mm (5/16") OD rigid tubing Can be converted to barb with 1/4" BSPP male threaded adapter Max Diameter: 25 mm Max Height: 45 mm Minimum Bottle Height: 200 mm Max Bottle Height: 370 mm Compatible Corks: Natural, agglomerated, collated, 1+1 agglomeration
$2,309.98 $1,590.02
-
Motueka™ Brand, 87.14-20 | Cryo Hops®
A fantastic addition to Lagers, Belgian and English Ales, and a great way to spice-up your favorite IPA recipe Aroma Profile: Fruity, Lemon, Lime, Tropical Alpha Acids: 13.0 – 17.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 13.0 – 17.0% Beta Acids: 11.0 – 15.0% Total Oil: 1.7 – 3.0% Motueka™ is a registered trademark owned by New Zealand Hops. Cryo Hops® is a registered trademark owned by Yakima Chief Hops.
$4.99 $4.24
-
Crystal | Pellet Hops
A very clean aroma hop that produces a mild, floral and spicy aroma. Due to it being mild and clean, this hop variety can be used in a variety of beer styles, including: Lagers, Kolsch, ESB, Pilsners, Pale Ales, IPAs, and Belgian Ales. Hop Statistics Alpha Acids: 3.5 – 5.5% Beta Acids: 4.5 – 6.7% Alpha-Beta Ratio: 0.52 - 1.22 Cohumulone: (% of alpha acids): 20 – 26% Total Oils in mls per 100 grams dried: 1.0 – 1.5 Storage(% alpha acids remaining after 6 months storage at 68° F): 40 – 50% Similar Hop Varieties: Mt Hood, Liberty, Hallertau
$1.99 $1.69
-
Lemondrop™ | Pellet Hops
Lemondrop™ was originally developed by Hopsteiner as Experimental #01210 and released in 2012. Derived from Cascade, you will find some familiar flavors residing in these lupulin glands. The hops name alludes to the aroma descriptors of lemon, mint, green tea, and slight melon. Lemondrop™ crushes as an aroma addition in Pale Ales, IPAs, Hoppy Lagers and NEIPAs, but don't shy away from it if you're looking to add some lemon-citrus flavor to your favorite Hefeweizen, Kolsch or Blonde Ale! Hop Statistics: Alpha Acids: 5.0 – 7.0% Beta Acids: 4.0 – 6.0% Cohumulone: (% of alpha acids): 28 – 34% Total Oils in mls per 100 grams dried: 1.5 – 2.0 Similar Hop Varieties: Cascade, Mandarina Bavaria, Centennial Lemondrop™ is a trademark owned by S. S. Steiner, Inc
$2.49
-
EVABarrier Double Wall Draft Tubing | LightShield Black | 4 mm ID x 8 mm OD
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 4mm ID size is optimized for home draft systems with short 5-6 ft. draft lines Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 4 mm (5/32") ID size is perfect for homebrew draft applications where only a short beer line is needed. We recommend using 5-6 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42765
$28.49 $18.52
-
Alora™ | Pellet Hops
Over 50% of total oils are Selinene—a sesquiterpene rarely found in hops Alora™ has 5X the amount of bound 3MH thiol precursors than Cascade Aroma—Peach, apricot, yuzu fruit, sweet melon with an alpha range of 7-10% Alora™ is the latest aroma hop from the Hopsteiner Breeding Program best known for her unique oil composition, high 3MH thiol precursors, and tantalizing aroma. Along with Alora™’s distinct oil and thiol composition, she is also one of the most carbon footprint friendly hops grown to date with stacked genetic disease resistances. Hop Statistics Alpha Acids: 7.0 – 10.0% Beta Acids: 3.5 – 4.0% Alpha-Beta Ratio: 1.75 – 2.8 Cohumulone: (% of alpha acids): 28 – 32% Total Oils in mls per 100 grams dried: 0.8 – 1.3 Alora™ is a trademark owned by S. S. Steiner, Inc
$1.99 $1.69
-
BrewBuilt® Stainless Butterfly Valve | 3" T.C.
The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt X3 Conical's 3" T.C. bottom port. Not compatible with BrewBuilt X1 or X2 Uni Conicals which feature a 2" bottom port. 3" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel
$109.99 $93.49
You have seen 336 out of 741 products